Abyssaly Black Wood Effect Sticky Back Plastic for Furniture & Walls

Amazing! Used the vinyl to go over my table top and has renewed the food van. Not sure about durability but nit looking to cut food on it as will be using a cutting board.

The Abyssaly Sticky Back Plastic in white wood effect is a fantastic way to give your furniture, walls, or worktops a fresh, modern look without spending a fortune. The subtle wood grain adds a touch of elegance, perfect for brightening up tired surfaces or adding a decorative finish to your DIY projects. At 30cm x 200cm, it’s a good size for smaller tasks like covering shelves, tables, or even creating feature panels. The peel-and-stick design is super easy to use — just measure, cut, and smooth it on. The adhesive is forgiving enough to allow repositioning if you don’t get it quite right on the first go, and it sticks firmly once in place. It’s waterproof and durable, holding up well in kitchens and bathrooms where splashes are common, making it as practical as it is pretty. Just make sure to apply it on a clean, flat surface for the best results. Whether you’re revamping your workspace, upgrading furniture, or protecting your worktops, this self-adhesive wallpaper is a stylish and cost-effective solution. A budget-friendly way to transform your space — it’s like a mini makeover in a roll!

Impressed how easy it was to apply however not very durable for high traffic areas as put my finger nails through it a couple of times. But it looks great on my fireplace. I chosen this colour to coordinate with my new ikea kallax white oak furniture. Not exact match but blends in lovely . Looks like real wood with lovely grain texture

I recently purchased the Sticky Back Plastic Wood Effect Black Vinyl Wrap with high hopes of transforming a piece of furniture into an elegant wood-like finish. Unfortunately, my experience with this product has left me disappointed and unimpressed. First and foremost, the quality of the vinyl wrap is subpar. The adhesive backing does not stick securely, resulting in a frustrating and time-consuming installation process. Despite carefully following the instructions and ensuring a clean and smooth surface, the vinyl wrap repeatedly peeled off at the edges, requiring constant readjustment and reapplication. This lack of adhesive strength raises concerns about the long-term durability and effectiveness of the product. Furthermore, the wood effect of the vinyl wrap is far from convincing. The black color, intended to mimic the appearance of wood, looks unnatural and artificial. The texture and grain patterns fail to replicate the authentic look and feel of real wood, resulting in a cheap and unconvincing appearance. Instead of enhancing the aesthetics of the furniture, the vinyl wrap detracts from its overall appeal, leaving it with a tacky and plastic-like appearance. I also encountered issues with the overall application process. The vinyl wrap is difficult to manipulate and position accurately. The material tends to stretch and tear easily, making it challenging to achieve seamless coverage. Even with careful handling, the end result was far from the professional finish I had anticipated. Instead, the furniture looked poorly executed and cheaply covered with an artificial material. Additionally, the vinyl wrap is not forgiving when it comes to air bubbles or imperfections. Despite my best efforts to smooth out any trapped air or creases, the vinyl wrap stubbornly retained these flaws, further detracting from the desired wood effect. The lack of flexibility in correcting mistakes or achieving a flawless finish was disappointing. In conclusion, the Sticky Back Plastic Wood Effect Black Vinyl Wrap fell short of my expectations in terms of quality, appearance, and ease of use. The lack of adhesive strength, unconvincing wood effect, and challenging application process make this product a regrettable choice for those seeking a genuine wood-like finish. I would advise exploring alternative options for achieving a more authentic and visually appealing result.

Decided to update my study on a budget. My desk had seen better days and was covered in marks/stains from crafting and painting. For £20, I now have a new looking desk and set of drawers - very happy. I dont think this vinyl would be thick enough for kitchen worktops but perfect for a temporary fix on other areas with less usage. Fairly easy to wrap with this - I used a 'magic sponge' to smooth out as I went along. The closer I got to the centre of the roll, it proved more tricky so I ended up with a couple of creases on the bottom drawer but I have enough left for a second attempt. No bubbles whatsoever on the desk top which I did first. Love the wood effect/colour too.

Very easily scratched, thin quality

When applying this I had to peel it off because it wasn’t straight but it stuck back on with no problem. Edit: forgot to mention the surface I wrapped. Don’t know if the surface makes a difference in how forgiving it is but.. I applied it to wood (not bare wood)

I bought this as I made my own "Dice Tray" using my 3D Printer, and wanted to give it a classic "wood grain" finish and remembered from a youtube channel (LGR) that they used wood grain vinyl on their PC build and thought "hey that looks amazing" that this is infact a thing - of course I remembered that back in the old days we would wrap our school folders in this sort of material for no reason other than it looked cool! Anyway I print using PLA, and after the print I wiped the surfaces, the vinyl stuck to the sides however when it had to negotiate around a corner I pulled it flush, pushing out air bubbles as I went, to find just a day later, it had come up a bit, I am constantly pushing down in certain areas to get it to form the shame more closely, they are sharp 90 degree angles, so it shouldn't really be a problem, but maybe it doesn't like the PLA, or maybe I will need to rough up the surface of the plastic a bit to help the vinyl stick? I don't know.. Either way I am still happy with the product, I have converted my Warhammer Fantasy Roleplay notebook into a woodgrain notebook and it works perfectly on that so, its nothing wrong with the product itself, just maybe not what my intended use is.

Arrivée très rapide, produit de bonne qualité, papier bien épais, collé parfaitement pour un rendu invisible, on ne croirait même pas du papier décoratif.

Un poco más fino de lo que esperaba pero genial. Fácil de pegar. Ha quedado precioso

Die Abyssaly Klebefolie in Holzoptik Braun ist eine stilvolle und vielseitige Lösung für Renovierungsprojekte. Mit ihrer selbstklebenden Oberfläche lässt sie sich einfach und schnell auf Möbeln, Wänden, Fensterbänken oder Schränken anbringen. Das Vintage-Design verleiht jedem Raum einen eleganten und rustikalen Touch. Die Maße von 30 cm x 200 cm bieten ausreichend Fläche für verschiedene Anwendungen, und die Qualität ist dabei robust und langlebig. Eine kostengünstige Möglichkeit, Möbel und Oberflächen individuell zu gestalten!

bon produit mais à tendance à se décoller lorsque celui ci n'est pas sur une surface plane et se déchire facilement.

Wie neu....