Raspberry Pi Zero Case with Heat Sink and 3 in 1 Adapter Kit Compatible with Raspberry Pi Zero W (Black)

Picked up a Banana Pi M2 Zero (imagine the 1Ghz Raspberry Pi 3a+ in the form factor of a Raspberry Pi Zero) and tried to fit it into the Office Raspberry Pi Zero W case (the red and white one) but the Banana Pi M2 Zero is just a tad thicker than the Raspberry Pi Zero W, so that was a no-go. Was looking for other cases with accessories and came across this. Even if if the Banana Pi M2 Zero wouldn't fit, the accessories look useful. With some finagling I got the Banana Pi M2 Zero to fit in here, thankfully it was just moving the board around till the ports matched up perfectly, so no modification to the case was needed. Once the board was secured I installed the antenna and found a nice spot for it in this roomy case (the Banana Pi has trash wireless if the antenna is not installed). The provided heatsink is wonderful and fits on this chip and cools it well, keeps it from throttling when playing N64 and PS1 games. The HDMI converter was useful, and I will keep it in case. The USB adapter is wonderful, I taped it to the side of the case and the whole thing looks sharp. If I had to say a con, I wish they provided a cover for the hole for the GPIO pins. I don't use them, but it would have been nice to have a ventilated cover to put there. Overall, I'm very pleased with this case, recommend it to anyone looking for a Banana Pi M2 Zero case. Thank you.

Like the title says, it doesn't sit perfectly flush. Might need to sand it down a bit but it's not too noticable until you kinda squeeze it. It makes a clicking sound. Might just be mine. It's nice if you have the io pins on the Pi soldered on and need a small case that you could mount a power switch to or something.

This works great. The case is slightly fiddly to get assembled, but no big deal. The included heat sink is a nice touch, and the included adapters all work fine. I do wish that the case were a bit thinner to make the Pi a bit easier to carry, but otherwise it is perfect. It even has a screw keyhole on the back should you want to wall-mount it.

The case is great and the HDMI connector seems to work, but the USB adapter does not and now I need to order an adapter. This was the reason I bought this case to have all the items I would need at once, so it not working makes this item a worthless buy. Unfortunately, it won't be worth the effort of a return since I did use the heatsink, so I will be spending money buying another adapter. Case fits great and has access to the SD card unlike the other review suggests.

Perfect - came with all parts pictured and described, as well as 4 screws to keep the entire housing securely in place around the pi zero. The whole reason I chose this one over other cases was the optional wall mounting screw hole in the back. While it included all the screws and attachments for literally anything else you could use, it didn't supply a screw for it (for good reason, since some people opt for screws and others for drywall anchors), but that's no problem - just get a small beveled, flat top wood screw. Or a drywall anchor with a similarly shaped semi-flat top screw. See my attached photo - there's plenty of clearance between it and the Pi to hang the whole enclosure on a wall, but there's even more clearance when using a flat top wood screw.

Great case for my Raspberry Pi 0 W. Able to mount on my 3d printer to use Octopirnt for my projects.

Multiple problems with this product. Buyers should be aware before buying. 1. Incorrectly made. The small plastic posts inside the case are a slightly spaced incorrectly. This means all 4 posts will not seat correctly with the Pi Zero board. I confirmed this by trying three Pi Zero boards I bought during the past two years. All of them had the same problem. 2. It is impossible to remove the micro SD card from the Pi after the card is inserted and the board is closed up in the case other than to unscrew the case and very carefully removing the entire board from the bottom shell. The case is very poorly designed. This will not be an issue for anyone who inserts the micro SD card and plans to never remove it again. Overall, this was a BAD purchase. The case looks nice but other than that it is not a good product or one I would recommend. I do not understand why this product has such a high rating especially with the inability to remove the micro SD card issue. Makes me suspicious of the positive reviews. Keep in mind there are manufacturers/sellers on Amazon who offer some sort of credit or discount to buyers in exchange for a review. It is a loophole in the Amazon feedback system. Keep this in mind whenever you see positive reviews. In other instances the product is rightfully good and deserves a high rating. Use your gut feeling.

The USB adapter is kinda cheap. One of mine broke on the first day. Other than that I like the case.

Diese Case ist absolut empfehlenswert. Das Preis geht voll in Ordnung, denn die Verarbeitung ist sehr gut und passgenau. Mehr kann man nicht sagen als: genau das, was man will und erwartet.

Très bien! Tous les accessoires sont inclus, très intéressant le radiateur qui se colle au SOC. Des vis sont fournies pour fermer le boîtier.

Buen producto, la calidad es mejor de lo que yo me esperaba, recomiendo la compra, relación calidad precio es muy buena.

Fantastic small case for the Pi Zero, came with some useful accessories which I ended up using.

Custodia per raspberry zero comoda e robusta fornita in corredo di adattatore usb e hdmi con dissipatore da mettere sul processore