JDMSPEED New Universal Electric Power Window Lift Regulator Conversion Kit with Switches Wiring and Hardware for 2 Door Pickup SUV Truck Van Car

Great product for a really good price. Installation took me about 2.5 hours by myself at night. Everything works perfectly so far—hopefully it holds up over time.

It work perfect, it’s easy to install and look great doesn’t chance the perspective in ur car

I read the reviews before I bought this and decided to get it anyway. A couple of the reviews mentioned stripping of the plastic adapters and a burning and melting of electrical wires. My experience with these issues are as follows; Stripping of the adapters - when I tried using the tightest, most snug fitting adapters and powered the windows up and down a few times and at the end of the window travel the motor would continue to turn when the crank could no longer turn as the window was either all the way up or all the way down and eventually stripping the adapter that fits over the window crank. The solution is to use the best fitting adapter, one that you don't have to force on that has very slight play on the window crank, the window will roll up and down smoothly and will positively stop in the maximum up or down position. The burning wires. As I was installing the power windows I would test them occasionally throughout the process, I had the ground wire connected and I would hold the positive wire to a positive lead with my fingers to operate the window. While doing this I could feel the wire getting hot so I looked around to see what's causing this then noticed the wires to the other window wasn't hooked up yet and were making contact with each other, I separated the wires and insulated them and tried again and wires stopped getting hot. It could also be because the installer didn't pay attention to the 2 brown wires in the harness, one of the brown wires has a red stripe on it, easy to miss and connect it to the wrong position in the connector plug if your not paying attention. I really like it and my advise to anyone who's going to install one of these is take your time, don't rush it, it is a universal kit and installations will vary in the ease, time and by the skill of the installer.

Great product for the money…

We used this kit to replace the aged and failing (also aftermarket) drive units in a 76 Dodge van. Can't comment on the switches and wiring because we kept the original custom wiring in the van, but the drives themselves seem to be working just fine. Could they use a little more power? Sure, but if your existing window mechanisms are working smoothly as they should, these will do the job just fine. Instructions, as mentioned in other reviews, are a bit lacking so you'll need to use your head a little to figure out the best mounting but the provided brackets give you plenty of options. Every vehicle is going to be different. Our driver and passenger doors even required a little different placement of the motors and mounting brackets. Tip: For optimum operation and longevity, when mounting, try to route the "cable" from motor to window crank in as straight a line as possible. That keeps the resistance and wear to a minimum and will also provide best performance. And don't be afraid to get creative. It's not against the rules to cut metal out of the door for a better place to mount the drive motor. Just be sure what you cut will be covered by the interior door panel when you put things back together.

The product itself is ok and works well so far, but the instructions are horrible, Obviously translated into english as some wording is wierd, and hard to follow. There was not a single menton of the electrical part of the installation. If you are not pretty mechanically inclined, you will strugle with the installation. Installed in a 97 Ford E350 UPDATE: The passenger door motor stopped working after a couple days. waiting for a response back as far as a replacement motor. So far not impressed. 2nd UPDATE No response from seller to resolve the defective otor. Total scam of a seller. Very disappointed in the seller and Amazon

Im genuinely impressed with how well these work. I put these in an old astro van with big heavy glass compared to a sport car and they still roll up and down pretty quickly. They where way easier to fit than I thought they where going to. All in all, I would say this is a great substitute for doing a full swap. The only question now is how long will it last? If its good for a couple years before I have to replace a motor, ill be happy with the price. I'll update if I have any unusual or noteworthy failures.

Overall it's a great quality of life improvement but it does have it's issues. The passenger side suffers from voltage drop (much slower to open/close). Also, the wiring instructions are non-existant. You'll definitely want to run a wire to your battery or use a 30A Fuse Tap to power it. The install itself is straight forward and easy enough. Definitely go out and get a set of self-tappers from Lowes/Home Depot as the provided hardware is garbage. Overall, the product is cheap but it gets the job done.