Kaico PS2 SATA HDD Adapter for PlayStation 2 Phat Console Expansion Bay | PS2 Phat expansion bay only, supports 2.5" and 3.5" SATA HDDs, no network port, ideal for OPL and homebrew setups

I'm always impressed by the build quality of kiaco products. Had my PS2 set to go in ten minutes

Quite literally plug and play. Will keep my ps2 working for a long time

Great product and super easy to use, it was as simple as remove it from the box, put the hard disk and insert it on the PS2, there's also a small manual with the instructions to how to format the hard drive and use it in general, but I have personally used a YouTube video for that.

I bought this as the optical drive was failing in my PS2 and adding a HDD with a FMCB mem card it would enable me to use my old games again, and I have to say its working great. Load times are faster and I'm happily playing burnout 3 and god of war again. I had some issues initially where the HDD would "disappear" and not be detected. Removing the drive and rebooting before adding back in would sometimes help. I believe these issues were due to a broken 3.5" SATA drive which I was using which had come out of an old PC, swapped to another 2.5" Sata disk from a laptop (which I had lying around and its now working perfectly. So beware of reusing older disk drives as they may be the source of your issues, this adapter however is working perfectly.

Very good for ps2 hard drive

This a good adaptor. It has a nice build quality, there is no unnecessary hole for the network port like other adaptors we see on the market, and has metal screws. However, because of the metal plate, it won't fit snug on the PS2. One of the screws will barely lock, and will very easily strip. This can be avoided quite easily: 1. Unscrew the metal plate and remove it completely; 2. Add the screws back on, to hold the two PCBs firmly in place. Don't overtighten it -- just screw down, until the PCBs are held firmly in place. You don't want them to move around when sliding in and out of the back of your PS2; 3. Cover the SATA PCB with a tape -- this should help any shorts with the metal housing of the HDD (there really shouldn't be anything to worry about, but it's better to be safe). Now, the adaptor will fit perfectly on the PS2. I've attached some photos to give a better insight. Apart from this design issue, the adaptor is really great and works as advertised.

This is great value i had an old 1tb hdd kicking around and i used this adapter to install it in my PlayStation 2 Phat. and it just worked fine the first time i was expecting some difficulty's. But its almost plug and play just follow the youtube videos to learn how to install the software or just use freemcboot memory card to load the games. i recomend this over the original ps2 network one because its sata instead of ide. that's a ton better in this day and age

If you are here looking to buy this product you are here for one of two reasons; You want a network adapter for your PS2 to play online, or You want it to use a HDD and play your games from it, with a little magic called Free MCBoot/Free HDBoot. To start, this product does not actually have a functioning network port, it's just for show. This product is used to connect a SATA HDD to your PS2 to allow you to play your games from the HDD, which saves the PS2s laser, speeds up load times and keep the console quieter assuming your PS2 has a quiet fan. This product has worked perfectly without any faults. It lets me play my games with faster load times so as far as i'm concerned this Product does it's Job perfectly. I would recommend this to anyone who likes to play PS2 games, period.

Bien

Well made, easy to install. Worked immediately and without issues in my plus size PS2.

Working so great with the PS2 fat

Quick shipping, nice quality and works great, what’s not to like?

Fa il suo lavoro. Prodotto molto buono. Ps2 rinata! Utilizzare hard disk/ssd (anche hard disk da portatile,piccolo) SATA