YalePM562 High Security BS 5 Lever Mortice Dead Lock 76mm 3-inch - Polished Brass Finish - 2 Keys included

This was to replace a 20 + years '5 Lever Mortice Deadlock' and not much had changed in that time as far as design principles, but the dimensions and keyhole layout geometry were different in my case and this meant akward labour, if like me you're not a experienced fitter.Great kit (every thing you need ...screws, inside /outside keyhole escutcheons, template, lock and lockbox), although the lockbox seemed oversize, it agreed with the "NEW DOOR" instalation guide yale seem to have supplied (a list of the kit parts is not included ,you work out what you have is correct or not by the fitting guide and the parts you are replacing being like for like-ish .The length of lockbox slot=50mm yet the mortice lockbar is about 35mm (like a small foot in a large shoe) .. so the lockbox seemed to be universal and probably the same one is supplied with both the 67 mm and 80 mm door lock kits .Like for like installation ..newer doorlock replacements maybe would just slide straight in and the diementions be a better match than mine.. like shown in the helpful video 'yale' have made to show the general install (don't expect to walk away as clean clothed as the young lady or man though) .Tools i found myself using were ... philips head screw driver ,chisel and drill .My twenty year door lock i replaced is a 2.5 inch (67 mm) lock ,the replacement is also 67mm but needed an extra 12.5 mm depth ,for this next gen lock to be able to slide fully into the door frame and the keyhole is now 7 to 10 mm lower and further toward the centre of the door by 4mm ,also both sides of the new lock have a rectangular metal plates welded in place over the lock mechanism ,for added lock tamper proof protection i believe ,which required chesil woodwork to shoehorn this extra clearance and allow the lock into the door slot .Many many hours later and wood shaving all cleared away ,all the new parts fitted + screwed inplace i'm finnished .Hmm the new lock feels smooth and has slick pricise bolt throw as the as the key is turned .A SATISFYING JOB DONE ,A GOOD PURCHASE .

Great Lock! Easy to fit and works a treat.

As expected from Yale Locks, great build quality and a lovely finish. Key action smooth and consistent. Fitting was easy enough if you have done it before, I had to make the door cut out larger as this lock a little bigger. Everything in the package in terms of screws trim plate escutions ect.

No issues works as expected

A very good quality lock. Installed on my garage side door and it looks great.

Excellent 5 lever door lock. It is slightly deeper than normal mortise locks so be ready to chisel out your current lock recess. I drilled mine more to help with removing the excess wood. Very smooth action and keys appear quite robust, something I’ve noticed people complain of other manufacturers.

High quality, easy to fit with a router jig.

I had a Yale P-M562-PB-67 from 2010 which I needed to change and it turns out Yale has used same product code, but altered the dimensions. Most annoying one was the faceplate had shrunk from 144mm to 134mm.Had to send back, if I had fitted this, I would have had to add a thin 5mm strip of wood top and bottom of faceplate.Found Union 2134E - BS 5 Lever Deadlock (67mm) fitted perfectly and was exact same dimensions of old Yale.