INJORA 39mm Shocks- Aluminum Threaded Shock Adjustable Absorber Oil Damper for Axial SCX24 FMS FCX24M 1/24 RC Crawler Car Upgrade Parts(Grey)

These shocks are great....but you have to do some tinkering. First they were sticking very bad. So I took them completely apart. Where the shock shaft exits the shock body it has a small plastic ring then a rubber o ring then another plastic spacer then a shouldered plastic washer that lines up with the hole in the screw on cap. What happens is the cap gets tightened and it squishes the o ring and makes them stick. Take out one of the plastic spacers and reassemble them. They work perfect! I actually lost one of the internal parts and they sent me new internals even though it was my fault. These parts are supper small. Like use a magnifying glass to work on them small. It took a few weeks to get the replacement parts but they cam through. I have no complaints. And I run them with no oil and they articulate great and just work good. And there about 3mm longer then stock so you dont have to replace a bunch of stuff to use them. Would buy again. In fact.....I did! Lol!!

Does what I wanted. Consider this a minimalist way to make your fcx24m better. It won't turn it into a climbing robot which is not what I want for this car so I'm very happy with these shocks. I used top mounting position which will add only a little height vs shorter stock shocks in the middle. Another reason I recommend top/upper position is that these being 39mm vs stock 32mm you will run into drive shaft issues if you try to stretch the fcx24m too high. Using 25w oil, 25% sag, medium springs thumb screw adjusted 75% all the way at the back but only 20% in the front. I'm new to this so forgive me. Drop test and it sits immediately. Lost a star which is harsh, I would have only taken off half if I could: when the car is left untouched for 30 minutes or more the shocks will kind off seize up. I'm ok with that as it's as simple as moving it past that point and they are super plush again. Its only after being parked for too long. I'm sure I will find a work around but I'm not that bothered by it.

Good oil shock, I was sent the wrong shocks but amazon made it right quickly. Fairly short travel. I recommend light weight oil like 20 wt or under. I run 20 and it's good. They do stick after sitting at full decompression but you press them down once before use and you are good to go. No stick until you let it sit again. Does not stick when in use.

Très bonne qualité avec les produits Injora, belle esthétique, s’adaptent parfaitement au SCX24

These are some nice shocks. I couldn't find the exact size I wanted, but these were just one mm short, so I thought I'd try them. And I'm glad I did. They came with a bit of oil in them, but I added a few drops and they are good to go. The ball ends were too small for the screws that fit my chassis, so I had to put them on my drill press and make the holes larger. It was a lot of work but I made them work. And work they do. I usually run ProLine shocks, but these Injoras seem just as well made to me.