Everbuild 30MINPU7 LumberIrwin 30min Polyure Wood Adhesive Liquid 750g

I’ve been using the 30 minute glue for many years. A repeat buyer! It’s easy to use, but take care when using it as it’s very tacky and sticks to most items. I really like the foaming action of this glue. It really does gap fill if there’s any imperfections in the wood surface. The strength is incredibly good as well once set. I’ve used it indoors and outdoors as it is water resistant. The good thing about this glue is that the 30 minute period doesn’t allow for a lot of working and handling of the piece before it’s clamped or screwed. It’s much more forgivable than the five minute version. I’d really recommend giving this glue a go. The only proviso is to make sure to cut back any over foaming which will happen on edges once set. Also use nitrile disposable gloves because if it gets on fingers, it takes a couple of days to wear off

it does exactly what it says... this is a decent product that dries very quickly and holds fast providing a great adhesion. That said, personally i struggled with it for the project i bought it for. it flows freely and expands very quickly making it difficult to assess and the amount needed and manage the amount that comes out of the bottle. Great product for larger projects around the home, ie skirting board fixing or furniture joints, not so good for small wood craft projects

The glue itself I would heartily recommend. Beginns to foam and cure after 1-2 minutes (depending a bit on moisture content of material and environment) so you get a couple of minutes of easy time to clamp and adjust, you get another 1-2 minutes to reposition if you have to but after that its really starting to get difficult. It is semi set after 30 mins and if you need to remove clamps at this point you can but if there is any tension on th joint at all 1-2 hours is a better idea. 24 hours gives a really strong bond and ive used it to glue wood to other things and it sticks really well to most surfaces as long as one of them is absorbant. Tha bottle is not so good. Maybe i god a bad example but the cap on mine is extremely hard to take off, so much so that the nozzle has stress marks all over and doesn't look like it will last much longer due to the amount of force needed to pull the cap off. Needs just as much force to replace but easier to do as you can just bear down on it. Most anoying thing is that once the cap clicks pased the impossible detent it is still very loose and clearly not air-tight. -Nice work Everbuild, you've managed to design a cap that is both too loose to do the job and too tight to remove! Good value for money, just try and find a new bottle to decant the glue into for daily use.

Product is used but industry leaders

Good quality product and a good price with prime delivery. Used to glue flooring joints in a garden room. Just be prepared this foams up as it cure so will need trimming off if your putting a floor covering on top. Once trimmed back I found the joints needed filling and sanding to be suitable for vinyl flooring as the foaming process left bubbles and holes. If you need smooth joints then a non foaming PVA may be better

I feel I have formed a bond eith this product. One can get attatched to any brand if you use it often enough, but I've decided to stick with it. It expands like a sod. Fortunately this one gives you about 2 minutes to set and fix the joint before it does its thing, unlike the faster version which isnt really useable. I haven't checked how well it fixes stuff but the excess came off very easily so im unsure. Its basically expanding foam.

Best glue for fixing stairs. Worked a treat

Pros. Cheap compared to some of the similar products available and of similar quality. The consistency is perfect, just the right viscosity for wood work and other porous surface jobs. Grips reasonably fast (15mins) while "activating" (moisture) and full cure is fairly quick and thorough. When cured it's grip does not disappoint. I've tried it on timber, MDF and ply, all hold well if pre-wetted. Cons, one only, they never make a lid for these things that seals out the moisture in the air entirely. So having cleaned out the nozzle (covered by a reasonably firm clip cap) I found it advantageous to put a couple of layers of cling film between the nozzle and cap to improve the seal, That seems to have worked. Would and definitely will buy again. Would and definitely do recommend.

Utilisée pour fabriquer un bac de plantation... Tenons, mortaises avec un peu de jeu, la colle comble bien les vides et c'est du solide. Entièrement satisfait, je recommande.