Seal the Deal! 🔒 Your Garage Deserves the Best!
The FOSLUOC Garage Door Seal Strip is a versatile 34FT weatherproofing solution made from durable TPE rubber. Designed for easy installation, it fits various garage door sizes and provides exceptional protection against wind, rain, and noise, ensuring your garage remains energy-efficient and comfortable year-round.
Brand | FOSLUOC |
Material | TPE Rubber |
Color | Brown |
Product Dimensions | 408"L x 2.25"W |
Item Thickness | 0.1 Inches |
Recommended Uses For Product | Garage doors of different shapes |
Manufacturer | FOSLUOC |
Part Number | Brown 561036 |
Item Weight | 3.61 pounds |
Country of Origin | China |
Item model number | CKMCBR-BR-561036 |
Size | 34'L X 2.25"W X 0.1"H |
Style | Universal |
Usage | Windproof |
Included Components | Decorative cap, screws |
Batteries Included? | No |
Batteries Required? | No |
C**I
Heavy quality
Worked perfect for framing the outside door. Was surprised the quality was as good as it was. Easy install.
Z**G
Love it so far
This looks and feels great, it sealed up the edges of my door very well and went on fairly easy.Making sure it's a clean surface before sticking on is very important.My only complaint is the little screw caps, they are weak and some of the holes were bigger than the screw head. Other than that I'm happy and will see how it holds up
H**1
Looks great and easy to put up with two people
I have a very old garage door, probably original to the house, and large gaps all around. The color is a very close match to my paint and looks like it has always been there and looks great from the street. Love it! Works great!
J**S
Worked great
I have a workshop with a 10' x 10' door, front and rear. I used these strips to seal the top and sides and they have made a huge difference this winter in blocking the cold norther's that blow in. Building is insulated, but the gap around the doors was a source of considerable heat loss. These greatly reduced that loss. Well worth the money, easy to install. Highly recommend
B**K
Pliable, does the job
Easy to install, although some of the screw caps were really difficult to get to stay closed. One just won't stay closed. Before and after pictures included. You can see all the daylight prior to installing. Can already tell a difference in my shop holding temperature. I'm happy with it.
G**S
Seems like it should do the job.
The quality is good accept the screws are honestly too small for the capped washers that came with the kit. Way too easy drive the screw all the way through the washer. Pretty easy installation, should do the job. Had to put a little WD 40 on the surface facing the door. Just enough friction between the seal and the door to cause the door opener to auto reverse.Also, keep in mind this is silicone and can't be painted, no matter what anyone says. So the color you got is the color you get.
A**Z
Good product
Went on easy, and there were plenty of screws it came with. The adhesion wasn't great on a lot of it, but the screws kept it in place. Good product for the price.
J**A
Great product but requires some time and patience for proper installation.
The media could not be loaded. This seal was perfect for my application. I used it to seal an old garage door in my basement and I couldn't be happier with this purchase. The provided screws were to long so I also purchased stainless steel 5/8 truss head screws for the installation. It's important not to install the seal to tightly against the garage door as the friction will make the door difficult to open. I cut a small piece (about 1 inch long) of the seal to take measurements for the seal installation. I placed the small piece of seal against the door frame and slid it towards the face of the door just until it touched the door. Then I moved it in approximately 1/8 inch towards the door and used a pencil to draw a line on the door frame at the outer edge of the seal. Now using a tape measure you can measure from the face of the door to the mark on the frame which will give you an accurate measurement of where the seal needs to be placed. With that measurement you can make small marks all the way around the door frame and use a straight edge to draw a line for exact seal placement. When you install the seal you want the outer edge right on the line all the way around so the seal is straight and applies even pressure all the way around the door. Once installed with the provided adhesive I added screws every 6 inches. Don't over tighten the screws as it will deform the seal.
W**E
FOSLUOC Garage Door Seal Top & Side Seal Strip
good so far
J**S
merci
tres bon
J**C
Good Production
Easy to install. Contacted the seller, quick response. Recommended the seller. Thanks
Trustpilot
1 month ago
2 months ago