ArmorSuit 6 Pack for Garmin Fenix 9/8 / 7X | Tactix 8 [51mm] Matte Screen Protector Anti-Glare MilitaryShield TPU Film - Made in USA

I purchased this ArmorSuit 6-pack for my Garmin 265, and so far I’m genuinely impressed. The installation was quick and completely bubble-free, and the fit is absolutely perfect, almost like it came built into the watch from the factory. I’ve been using the first protector for about a week now, and it still looks flawless with no lifting or scratches. I also really appreciate that the pack includes six protectors, which adds a lot of value. It gives me peace of mind knowing I have several backups ready to go whenever the current one eventually wears out. I’m hoping this helps extend the life of my watch screen and keep it protected from everyday bumps, sweat, and workouts. I’ll make sure to come back in a few months to update how long this first protector lasted before needing a replacement. So far, though, this has been a great purchase and one I definitely recommend to other Garmin users looking for reliable screen protection.

We have three Fitbit Sense Smart watches in my home, and for a long time I've been wanting to get protectors for them, but with the curved edges, I didn't think it was possible. I finally decided to do some real research on it and I came across this product. Let me say that the negative reviews I read almost made me not buy it, but I'm so glad that I did. The Fitbit I started with was an older one that has a couple of scratches on it (The other two are perfect, so in case something went wrong I didn't want to risk messing those ones up). They have easy to follow videos on YouTube, which I watched prior to installing (and rewatched a couple of times while I was applying, because they go very fast). The instructions could not have been easier to follow, but at first with the protector slipping and sliding around I was a little concerned, but in less than 30 seconds I got it into place and started using the squeegee and it started looking good! The edges, however, were not sticking down well so I took my thumbs and kept going over the edges and the corners, from the center of the Fitbit out, and to my delight it all stuck perfectly. You literally cannot tell that I have a screen protector on my Fitbit. Some of the reviews spoke about the edges not staying down over time, so I wanted to wait to install it on my other Fitbits, and I am happy to report that after over a month, it looks as good as it did the day that I installed it (and that Fitbit that is worn 24/7). That being the case, today I sent ahead and installed it on another one, and again, it was super easy and came out perfect. Oh... I forgot to mention that there is zero difference in functionality, and the Fitbit that had the scratches on it now looks brand new/no scratches. As of now, I highly HIGHLY recommend this product. I will update if anything changes. Honestly, I wish that they made this type of protector for my Samsung S23 Ultra, because I would buy it immediately, but unfortunately, it appears that they do not.

Got this about 30min ago so cant speak to its longevity, you get 6 anyway. Installation was very easy. I was a bit worried by some of the reviews. The paper instructions are a general guide, I didnt watch the video. Took about 5mins to do. 0 bubbles, 0 issues. They are clearly designed to be used with a case. I have the Spigen Liquid Air case, take the case and band off first. The only thing I did different in the instructions was use the squeegee in a clockwise, center out motion. Since my watch is circular, not square like it shows. Do this gently. I did 3 rotations. Then one more firm, but not to firm, to ensure all liquid is out. Lightly dabbing the sides with the cloth as I went each time. Then hold the watch with 2 fingers in the center. Take the cloth and grip the outside, spin the watch multiple times with a decent grip on the cloth. This locks it into place a keeps the edges secured down. There should be a couple mm extra space around the sides, this is for fitting the case on. Now to hope it does its job properly if I have any accidents. As a side note, the material used as listed is TPU(thermoplastic polyurethane). If you want to take it off, hit it with some heat first to loosen it. Hope this helps, saw many reviews with people having various issues.

So for the record, I've had this exact brand on several devices that see a lot of hard wear, and this does the job perfectly. After 8 years, I took it off my last Fenix 3, and the screen looks absolutely perfect. I immediately put this on my Fenix 7x, and install is easy and fast, especially compared to phones or tablets, and I'd expect years of protection again But after wearing the new watch for a few weeks, putting this on did dim the gorgeous display, so I hesitantly removed the ArmorSuit and instead am trying a tempered glass one. It's no fault to ArmorSuit, but the unfortunate part is that it can dim the display a bit. I'm keeping them, may go back to it when the newness wears off, as I said, this brand protected my last watch for almost a decade, house work, car work, mountain running, a rough life, so I absolutely believe in the quality and value

This is hands-down one of the worst products I've ever purchased. I watched the application videos a few times, but in my opinion, it's impossible to place one of these shields on my Versa 4 when all your fingers are wet. First, try prying off the shield from the plastic-like substance to which it's affixed. Fairly impossible. Then, try to keep the wet, and moving, shield in place with one hand while trying to squeegee the water underneath the shield that still remains on the watch face. It's laughable. I went through an entire box of these shields (six) and finally was able to place one to my watch and it looks terrible. I've attached a photo of what the screen protector looked like the next day. It had even gotten worse. All the bubbles and markings you see slowly emerged over 24 hours. Trying to apply this screen protector wasted an hour of my life I'll never get back. This product cost me less than $10, but the manufacturer should pay me for even attempting to use it. I'd give it zero stars if I could. I've used other brands of shields for other smartwatches I've had and have never experienced the application issues I had with this brand. As for me, I'm buying a transparent cover for the entire watch and will forego attempting to place any more screen protectors on its face. There are other products like this on the market. Find another brand. DO NOT PURCHASE THIS ITEM!

While working in the yard I bumped the screen of the watch directly against a metal T-post. It was hard enough to gouge the protector surface, and peel it slightly. I removed the protector and checked, the screen was undamaged. They definately work at least for this type of situation. They install easily, although you should have plenty of time when you do it. Wetting your fingers and the watch surface with the spray included as instructed will prevent finger prints on the protector. They will move around freely for a several minutes then suddenly start to adhere, at that point it needs to be in place and have the bubbles pressed out. They do look cloudy when you first install them, but by the next day it looks perfectly clear and any small bubbles seem to go away. So far the edges are staying put very well on a Pixel with a curved edge. I did try a tempered glass cover originally but it caused the screen to malfunction. This one has no noticable affect on the touchscreen performance as far as I can tell. I will definately buy more once this package is used up.

I was skeptical about the ArmorSuit Screen Protector when I first took it out of the box. The application process on the watch was relatively straight forward, and once installed I don't really even notice that it is there. I've scrapped my watch against several surfaces since installing and it seems to be doing a good job of protecting my watch. Occasionally it gets small air bubble or even looks scratched when I bump it but the "self healing" property of the material brings it back to normal within a few hours. If there's air bubbles I simply use my fingernail to scrape them to the edge and they disappear. I've had this installed for almost 4 months and will continue to use this product. At this price point if they get scratched or come off they are cheap and easy to repair.

Easy to install ! Even a caveman could do it ! I’ve had the screen guard on for 6 weeks now and can’t even tell it’s there. I don’t notice any loss in touch screen function or reduction in clarity at all. My previous Garmin screen got scraped up pretty bad in the first few months , so I’m going to be religious about keeping my new screen crystal perfect ! So far so good!

These are easy to install and have worked well. No complaints with ArmourSuit for any of their products we've used.

Tres mauvais, marque pour un rien et ne disparait pas comme supposer