Wireless License Plate Backup Camera, No-Drill | Wifi HD 160° wide view, waterproof, real-time signal for Car SUV, compatible with iPhone/Android/iPad, parking/hitch aid

Game changer for my car that has very bad backup visibility. The fish eye lens gives a great range of vision.Installed it two days ago. Hooked the power up to my license plate light because of another comment here - thanks. It was a 1/2 hour job for me.I drive with my lights on, so that keeps the camera always on. Because it takes several seconds to connect to your smart phone, I think that is the way to go.Super happy with this inexpensive solution.

For tight parking it is sometimes helpful to get the POV of what your bumper is seeing, so I installed this as a front camera. Pretty straight forward if you have a plan for wiring it and others have said keeping it always powered (connected to battery in constant on) is better performance. I have it in a shaded part of my grill so I'm not worried it will get hot from engine while moving but I am worried if it would overheat on a hot sunny day when parked for a while. Hoping it lasts this summer, but super easy to use a android tablet in my cab to see the feed and use other navigation apps. You can also record the feed to your device with the JoyTrip app or take screen caps. Very heavy fisheye lense and there is some lag on the image, but for seeing down front it works and I am sure the same is good for the back if your vehicle needs a backup camera. Likely not the best performing option, but it does work and a cheap and easy option compared to other solutions.

I bought this camera last year and just installed in my on vw beetle. We connected it to the reverse light know that there may the a delay but that’s ok. We tested before putting everything back by putting the ignition on but not started, put it in reverse, I was able to connect to the WiFi on the camera and it worked beautifully. We put everything back together and when to use it will the car fully started and in reverse, but it would find the WiFi to connect to the camera. But again with just the ignition on but not started it connects just fine. What am I missing or what do I need to check or change. My phone seems to only want to connect to my internet WiFi and see the one for the camera as not internet. My car is a 2013 and my phone is an iPhone 14 Pro IOS 18.3.1, if you have any pointers that would be great because a camera that only works with the engine off is useless.

The 7 inch screen is simple to install, set up and use. It works exactly as described, which brings wireless Apple Play and a backup camera into my old Jeep Liberty. Since my Jeep doesn’t have factory Bluetooth or an aux input l had to use the radio station method to link the screen to my factory stereo. It was a simple process and works flawlessly, even maintaining the great sound of my Infinity radio. The photos l attached are of my Apple Play screen, and one shot of the backup camera showing the view as l back out of my garage. This unit was very reasonably priced, simple to install, and exceeded my expectations by bringing an old vehicle into 2024. The only negative aspect is you need an absolutely flat surface to install the unit to the top of your dash with the adhesive mount. My Jeep does not have that, so l drilled 4 small holes, and screwed it in securely to the top of my dash. I prefer it this way, as it won’t fall off.

I have no "tech" on my 18 year old Honda Accord so hard wiring the camera was necessary (USB Port? Yeah...No!) I tied into the rear license plate light so I have power as long as the lights aren't turned off. Synching up with the Camera WiFi was super simple. The JoyTrip app is very user friendly.I used the parking lot of a local business to align the guide lines and realized that I might need to shim the camera bracket a bit to get things perfect. Not a big deal. Finally, I must write that I was shocked by the clarity of the camera image.Enjoy!!!

The camera and image quality was as good or better than expected. It was easy to install. The biggest issue is you must open and connect to the app each time you wish to use the camera. Not only that, you have to start the vehicle to turn the camera power on and then connect it the camera once you open the app. It is a three step process before you can use the camera to assist in backing up. It was very tedious and not something you want to do in order to use.

30 years in IT systems and support so electronics are not new to me. Out of the box, the camera appears solid, but the wiring connection lacks a way to secure the cord to the camera. I've use connectors like this in the past but they typically have a retaining connector. This product does not. If you move the camera it appears to lose connection to the power cord. After an hour or so for playing with this device, I've gotten it to broadcast a WIFI signal a couple of times but the WIFI connection drops after 10 seconds. I'm assuming it's because of the loose connector. I'm testing from my desk w/ the 5v USB cord. Reading the spec sheet, which was in the box, the device operates best w/ a 12v supply. USB provides only 5v. I'll try hardwiring and if it performs better, I'll update my rating accordingly. So far - I'm not impressed.

Need a rotatable phone holder mounted on dash. Has a very clear useful wide view of rear while backing up. Paid a professional installer $150 to connect camera power to auto back up lights. Camera is at top of rear license plate on 2013 Prius C2. Really improves back up safety. Phone used is Samsung S24FE