TOPENS ET24 Automatic Electric Gate Lock for DC 24V Swing Gate Opener Gate Operator System Device Safe Security Gate Lock

This item is essential in windy areas. I live near the coast of the Gulf of America so it’s windy. Plus the added security is comforting. It was easy to install and works as designed.

Easy to install. Works great on our 4 gates

This gate lock is very stable. Works very well.

I purchased a complete Topens Dual Gate Opener setup (A La Carte) including: PW502 Opener, TC196 WiFi Remote, ERM12 Remote, TC175P Wired Keypad, TEW3 Vehicle Sensor Wand, and ET24 Gate Lock. After setting up and adjusting the gate travel, everything works as expected. One significant issue I had to work thru with the support staff at Topens was the inconsistent operation of the TC196 WiFi Remote that works via your smartphone. Although my indoor setup is well within the 230 meters from the gate controls (mine is about 50 meters at the most), the operation was inconsistent. It may work one day and not that afternoon. After several exchanges with Topens support, they suggested an external antenna ( https://www.amazon.com/dp/B094MW1YMV/) that has fixed the issue. One additional tip I would offer is when you are setting up the TC196, the "paring" sequence MUST be done as fast as possible. It appears the main board only has a few seconds to press the momentary switch on the main board, then press "A" on phone, have lights flash and press "A" on phone again. It took me multiple tries to get it programmed. Again, after solving the issues with the TC196, all the operations of the gate and related components appear to be working as expected. Thanks again to the support at Topens for assistance in getting everything working!

I got this because I have two big dogs and just put in an electric gate opener. Problem was that the dogs jumping on the gate just opened it. This is solid and the instruction for connecting it to the control box were fine. But I had a horrible time getting it to latch without getting stuck. The gate catch with the rod that is grasped by the clasp has to be put exactly right or it doesn't work. And the instructions give suggestions about things you might have to try, like setting the closing gauge for the master gate a little past the normal close position. I assume this is to put extra pressure on the locking mechanism so that the bar will actually go under the clasp and lock in position. But it also makes the gate bow out a little. Any attempt to get that bow to go away results in no locking of the mechanism. And the piece that holds the bar that is the receiving mechanism for the lock has to be put in the exact right position. But there is no explanation of what that position is other than to make it level with the other piece. But it's position to the right or left is just as important. The little rod is not set in place, it moves a bit and so it can be attached where it will receive the other piece of the lock when the gate closes, but won't latch. Or it can be attached where it latches, but then there's so much pressure on it that it won't unlatch. This was, by far, the most difficult, arduous part of the process of installing the gate openers. At one point, I was despairing of ever getting to be able to actually use the gate opener because without a lock I can't let the dogs out and so I would end up having to use the slide gate I've been getting out to open every time I've left the house for the last 28 years. It is now latching and it has worked for several days, locking and unlocking each time without fail, so I am tentatively excited that I might have it all finished. However, the master gate does press out a little past the close spot, and I worry that there is pressure being put on the gate opener because of that, that will wear it out faster than normal. But, fingers crossed, it will have a long life. My only request is that the instructions would be a little better at explaining where each piece should go to work optimally. EDIT: Well I've had this for a while. I bought a gate stopper that goes into the driveway and that really helped with the gate. They do suggest that in the instructions. It has mostly worked since. However, if it is relatively windy the pressure against the gate seems to make it stop working. I am considering putting in a drop rod that I can engage during windstorms to take the pressure off the lock. The other issue is when the temperature dropped the lock froze and I was locked in for a bit. Even the key wouldn't unlock it. The openers were working fine in the cold weather. It was only the lock that had a problem. So, I would say that the lock mechanism is iffy for places that have many days below freezing. Luckily I live in a place where that's pretty rare.

Great accessory for TOPENS XD851, essential accessory for large single gate in the closed mode. Easy to install. Activates for 4s before the gate opens. The cable provided is a little short for 16ft gates and needs to be extended, a simple fix.

I recently installed the Topens electric gate opener model PW802 along with the electric lock model ET24, and I am thoroughly impressed! These products have exceeded my expectations in every way possible. Let's start with the gate opener. One word: phenomenal! The PW802 operates so quietly that it's almost eerie. No more waking up the neighborhood with loud clanking noises every time I come or go. And speed? Blink, and the gates are already opening or closing! It's lightning-fast, yet it moves with such smoothness and precision that you can't help but admire the engineering behind it. Plus, installation was a breeze thanks to the comprehensive instructions provided in writing and over the phone. But let's not forget about the ET24 electric lock. This little device is a game-changer! It adds an extra layer of security to my property while seamlessly integrating with the PW802 opener. What really stands out to me is how seamlessly it works with the gate opener. It's like they were made for each other, which I suppose they were! The lock engages and disengages swiftly and silently, ensuring that my gate remains securely closed when I want it to be. Overall, I couldn't be happier with my Topens electric gate opener and electric lock combo. The quiet operation and lightning-fast speed of the PW802, paired with the seamless integration and added security provided by the ET24, make for an unbeatable combination. If you're in the market for a reliable, efficient, and whisper-quiet gate opener and lock system, look no further than Topens. You won't be disappointed!

This works perfectly with the vevor automatic gate openers and easy to wire up and install.

Excellent product. Worked well with gate opening hardware. Instructions very clear. Video of installation was superb! Needed help to adjust the lock, and Bella was there with expert help.

Das Torschloss ist im Aussenbereich wenig geeignet. Es rostet und der Mechanismus klemmt dann. Für Aussenteile sollte man doch bessere Materialien verwenden.

Se place sans difficulté, côté gauche ou droit. Pour moi portail a deux vantaux mais doit pouvoir se placer sur un portail a un seul vantail. Prévu pour être assisté d'une batterie (que je n'ai pas monté) en cas de coupure du courant. Bien entendu il faudra que le mécanisme d'ouverture automatique du portail permette le montage d'un verrou.

Fácil de montar. Lo instalé en una puerta automatizada para que nadie pudiera forzar los brazos de apertura desde fuera. No ha fallado nunca.

Sturdy and well made. Essential on double gates to stop them blowing in the wind. Fitting instructions easy to follow.