Replacement 8.4" Uconnect 4C UAQ LCD Monitor Touch-Screen, Compatible with 2017-2020 JEE-p Chry-sler 200/300 DOD-ge Duran-go Ra-m LA084X01-SL01(02) (Digitizer Included)

Screen turned out to be LG brand same as original to vehicle. Watch some YouTube videos to easily swap out the screen. HINT - before you remove the 5-long screws that allow the screen to be separated from radio use some zip ties to hold the two halves of the radio together. You don’t want these to separate as parts will fall out and make the job difficult. Wish I would have taken some pics.

It had a blank screen but after a few minutes it came on and works perfectly.

Seller answered question very quickly about fitment and it turns out they were right. It shipped in one day,I didn't realize how bad the oem radio looked. New screen is better than perfect, so crisp and clear. It fit perfectly and I would absolutely purchase from this seller again.

Easy to install yesterday but touch screen is not working at all. Will wait another few days to see if it starts working. If not, I will be returning this.

if you are going to install one of these, take your radio out and apart first to check the model number of your screen (not the model number of the radio, but the model of the LCD screen). If I had went by car model, I would have ended up with the wrong one. As a matter of fact, my car model (2018 Jeep Renegade) was not support by the advertisement. Only because I checked the back of the screen, I got the right one (LA084X01-SL01)( actually got the the SL02 which is interchangeable with the SL01). Took me a total of 45 min from start to finish. I recommend watching videos on the install. This has the LCD screen and the touchscreen digitizer together. not going to say its cheap, but it solves the delaminating problem with these radios.

The media could not be loaded.  It worked great, we will see the longevity of this new display. Was installed in a 2018 Jeep Grand Cherokee with the Uconnect display separating from the digitizer in January 2023. It was not all that bad to install, just follow the YouTube instructions, and pull the trim piece around the display with a plastic pry bar. once you get all the clips released, it is 4 - 8mm screws holding it in then all the color coded radio disconnects to take out the display. Just take your time installing, Line up the ribbon cables back on the motherboard and you should not have any issues. Only reason not a 5 star review is that we will see if it lasts for the years to come.

Bought to replace my original touchscreen in my dodge challenger after having phantom touching issue. Was a easy swap and installation.Worked great for about 3 weeks, but then my phantom touching returned and us worse than before. Also the backlighting is not perfect.

I installed this in my 2018 dodge charger scat pack with a direct install. Very easy and it comes with every you need.

Perfect fit

Arrived on time and very easy to install. Works great!

Product arrive broken, damage on the screen, very disappointed