PaintArmor by ColorX Labs... A non-spray, easily applied, REMOVABLE armor for paint!PRINTED DETAILED APPLICATION AND REMOVAL INSTRUCTIONS are included in the shipping package. Check our How-To Videos http://bit.ly/PaintArmorClearHowToVer1BRIEF APPLICATION NOTES:1. PaintArmor is non-spray and does not produce noxious fumes. Application & Removal Temperature note: PaintArmor should only be applied and removed between 70 and 85 Degrees Fahrenheit (20-30 Celcius). Do not freeze PaintArmor.2. What you'll need: PaintArmorDIY is a non-spray application and great results can be had with using tools you may already have (paint roller or paint edging brush) or are at the local hardware store. 3. PaintArmor dries well with the use of a fan. Any floor fan will do. Gentle turbulence over the coated surface will help dry each coat in about 5 minutes.4. If you are applying or removing in cold weather, please move your vehicle inside and heat the room to between 70 and 85 Degrees Fahrenheit (20-30 Celcius). ORDERING NOTES:1. Clear: Clear PaintArmor will tend to aerate and become cloudy with a roller, so you may prefer to use an edging brush with Clear PaintArmor. 2. Colored PaintArmor: OEM finishes vary in many ways. If you are intending to apply colored PaintArmor is it advisable to apply 2 coats of Clear PaintArmor to insulate the original finish and help avoid any possible tinting via the colored PaintArmor.3. PaintArmor is a short term protective film. If you will leave PaintArmor on your vehicle longer than 6 months, or if applying PaintArmor to a previously chipped finish, over plastics, rubber or matte finishes, apply PaintArmor NanoCoat on the surface to be coated first. NanoCoat will ensure easy removal in these cases. To apply NanoCoat, just wipe on, let dry for a few minutes and then buff.
Trustpilot
2 months ago
1 month ago
