Sealey Ak46080 Twin Leg Puller Bar Type 80 X 100Mm

This is a robust puller, I found it a little fiddly to get set right but that's just because I had hardly any room to maneuver it around the sprocket I was trying to remove, honestly fantastic tool, popped it straight off and had tried a lot to get this thing off before! I couldn't get any other tool I had in. The fact you can also reverse the legs and do an interior pull if you wanted to is great. Most cheap brands they snap or bend under the pressure that was required to remove this. This feels like a good heavy tool. Sealey stuff has never let me down. Happy customer!

So after giving up the will to live with so many wasted hours trying to get my lower shock out that was stuck to the hub, I decided to try out this puller as a last ditch attempt before taking it to a garage.I tried heat, hammering it, W40, levering it and swearing at it to no avail. So I put the bolt partially back in, put the jaw puller on to grip the lower part of the shock and started turning it. And just like magic, it pulled it away and came out! I really would not have known what to do had this not worked. It quite literally made light work of this. Just wished I got it sooner!Others have also recommended this puller for windscreen wipers so will be a tool I can use again with that Sealey quality.

I used it to remove my rear screen wiper. It worked and was easy to operate.It's big and would have pulling power for more strenuous applications.It will last a lifetime.

Good product, fair price, prompt delivery. Works for me.

My reason for this tool may not be typical, but for the many of you struggling with same problem of jammed wiper-arms on the motor spindle . . GET ONE.I first time around snapped the wiper arm, so I then, after removing the rusty nut, saturated the spline and motor shaft with WD40 . . Each day for a couple of days.Then a new stainless steel nut was fitted on the spline, leaving it proud to avoid damaging the water outlet.The Sealey Puller was placed in situ, and with a Twenty Pence piece between it and the nut, a half-turn of the puller bolt removed the remains of the seized wiper arm.No damage to anything, especially my pocket, and now I can successfully install any required parts.The Sealey Tool is now a required annual maintenance item for myself, and loaned to friends and neighbours.Important facts are that it was acquired purely for windscreen wiper arm removal, fits easily and securely, and showed no signs of weakness.Highly recommended !

Perhaps it is me but I found this very awkward to use. The arms flail around loosely and slide off, and the lever pushy thing has a rounded ball ending, so pulling out a rear wiper arm sideways with its own rounded head required 3 hands to hold the whole thing together and a lot of trial and error and countless attempts where it just slid off the bolt as soon as pressure was applied … until finally it worked. I would not get this model again if I had to, having used it.

Bought the 80x100 model to pull my wiper arms so I could swap the wiper motor.Made easy work of the job; one side was easily accessible and despite being large and chunky I managed to manoeuvre the puller into a close enough position to pull the other.A smaller flimsier model may have fitted better but would likely have failed under the load.

Good value and got the head off my machine after day of wd40 soaking

Extracteur bien fini, très solide, super rapport qualité/prix.

L'estrattore è molto solido, ma è impreciso e soprattutto le punte sono troppo larghe ed è praticamente impossibile fare presa sulla maggior parte dei cuscinetti interni. Il sistema a doppio fissaggio, garantisce presa solida, ma è scomodo da usare. Le leve inoltre non scorrono facilmente ed è difficile il primo posizionamento. Concludendo, è un prodotto che non consiglio per lavori precisi o dove c'è bisogno di praticità d'uso.

Bestes Werkzeug zum Abziehen eines Lenkrades (Jeep WJ).

Acheté pour une extraction difficile, a très bien fonctionné, appareil de bonne qualité

Estrattore non utilizzabile a causa del disallineamento dell'asse delle ganasce con l'asse della filettatura, sotto carico il disallineamento aumenta ancora di molto rispetto alla foto. Oggetto realizzato in maniera pessima senza nessun controllo di qualità. Qualsiasi addetto avrebbe dovuto accorgersi della macroscopica deformazione che rende l'attrezzo inutilizzabile. Non ho restituito l'oggetto perché ho molato le ganasce per renderle più sottili prima di accorgermi della deformazione della traversa. Non è tollerabile mettere in circolazione attrezzi di questo tipo.