Blindsmart Rechargeable Tuya Zigbee Roller Blinds Motor for 38mm Tube, Motorized Window Shades Automatic Blinds Curtain Opener APP Control, Zigbee Hub Required (with 9-Channels Remote)

The media could not be loaded. Very good battery motors. Make sure the higbee hub is in the same room or very near.In the package - one motor. The motor has 2 signal wires hanging out of the drive end. One pivot end insert for the blind tube - its a plastic insert with a round metal stub that sits in the pivot bracket. 2 brackets, a fixed end bracket with a flat tab that the motor slides over and a pivot side bracket with a plastic locking tab that you push down once the pivot stub is inserted. 2 cords. One 41” USB to mini USB to charge motor and one 80” USB male to USB female as an extension (so ~120” or cord length for those higher blinds. The provided cords are heavy duty and instructions say to use them - my guess is that it is related to amperage (current) needed to charge motor.Installation - these can be outside mounted or inside mounted. The brackets come with holes to accommodate both types of mounting. I installed them on the inside of the window. After looking forever to find a DIY solution for roller blind tubes I bought the METech tubes on Amazon. They were WELL worth the price and they come with bottom weights that look great. The motor hardware fit perfectly inside the tubes. I cut the tubes and fabric 1 1/8 in shorter than the exact opening width. This allowed a perfect fit for the blinds on the brackets. I position the battery charging port so that I could easily access them (front facing) which positions the wires to the back. I then placed a small piece of of double sided tape on the window frame and tucked the wires against the tape so they could not get caught in the blind as it moves (we used a mesh type fabric for the blind so the edges are a bit rough)Operation - I bought 5 motor only and 1 motor/9 channel remote, for a total of 6 motors. The connected perfectly with the instructions. Although the remote looks different that that in the instructions. The basic functions are intuitive , you’ll figure it out. The directions are easy enough to follow. When you charge the motor the red light will go out once charged. Use the ‘bump’ buttons (circle with arrow looking buttons) to get the blind in the exact open/closed position to set the motor limits. I had to hold the 50% button for a few seconds before the motor would move.Alexa - You must have a higbee hub. I struggled with the first hud that I bought on Amazon (not all hubs are equal!) and that’s where their customer service was awesome! I sent a note via Amazon messages and they got me lined up with the right hub and and I was able to connect thru the SmartLife app. NOTE - the hub must be close to the blinds, at least for me it did. 2 rooms away just did not cut it. I used a plug-in WiFi extender and plugged the hub LAN line into the extender and located in the same room as the blinds. Voila, all is good. Once connected I used the remote to position the blind where I wanted it in the closed position and then used the ‘setting’ in the app and clicked on ‘set lower limit’. Repeat for the open position. I created a routine in Alexa and the blinds open and close on command. When connecting to hub the blue light initially blinks but then goes out; it does not stay blinking like most Bluetooth devices but the unit is still in paring mode. Interestingly I found that once I put the motor in pairing mode I hit the up or down button on the remote and that seemed to help the connection (but that may have just been coincidence, as I was trying everything to connect them until I moved the hub into the same room)

Used for roller shades. It has not charges half the time because the charge port is so sloppy. I have purchased 14 of these and only have 8 blinds. 4 have been replaced and 2 more need it. Will be finding a different brand.

eh adaptado estás persianas para mi nuevo RV de la marca jayco y estoy muy feliz me han servido muchísimo y me facilita la apertura total al tiempo.

This came used and broken. Sent back for a refund.

Had to return cause I need a 28mm tube motor not the 38mm. Easy to set up and it would’ve worked as intended.

Do not buy these. There is zero customer service even contacted Amazon and they cannot find an email or telephone number for support.