ULHR30Z

It looks nice, and is sturdy too.

Best decision made, best purchase made. The material is wonderful. It’s strong and has a nice glossy matte finish to it. The hooks are held strong. I’m very sure I won’t be worrying about scratches or paint peels. I don’t see this falling down at any moment. I have tested it with a good amount of weight, and it’s held and surpassed my worries. Highly recommend. It’s worth the price and time to hang it up which was quick and easy.

This is a simple but elegant coat rack, perfect for small spaces. Installation was easy, seems to be very sturdy after it is installed, and the hook configuration is very functional.

The holes for mounting this rack are either partially or completely blocked by the hook, so I had to remove one of the hooks to get the screw though the board. Upon removing the hook, I see that the 'nut' holding it to the board is about 1/4 in length with a fine thread that could easily be stripped. I mention that because 2 of the hooks were loose and needed tightening, plus if you do have to remove a hook to get the screw in, be careful not to over tighten. The last issue I had is that the holes in board are ever so slightly too small that the mounting screws will not push through, making mounting that much more troublesome. I enlarged the holes slightly with a drill, and that was a big help. It's cheap ... but it will come in handy. UPDATE: I'm upping my rating because the seller went to extremes to please me, even though I said I was fine. They ultimately refunded my money, though I think that was unnecessary. I had problems with the rack, but made it work. I wasn't fishing for something back from seller, but am impressed that they made a full effort to make me a happy customer.

I wanted to add hooks to the back of a door to hang towels and this product worked great. Well made and very sturdy.

They are great for bath towel racks. We tried one and now have one in each bath. We have hollow core doors so construction glue holds them very well. We are pleased they are sturdy but not too heavy to hold securely with the adhesive. Taped them in place and let them cure for 24 hours.m before removing the tape and using.

We use these hooks at the front door for jackets and dog leashes. I am very happy with the quality and look of them. As others mentioned, the mounting holes are a bit too close to the hooks on the ends. But I was able to angle my screw driver slightly and get it on the wall without a problem. It was good knowing this ahead of time, so I was prepared for it. It really wasn't a big issue. They look classy. Great value for the money.

This is a great value, and it looks great, too. It's the perfect size for the small corner in my office, and I managed to install it myself. My ONLY difficulty was initially getting the screws into the holes because they are seated very close to the outside hooks. I had to get the screwdriver into the head at an angle, so it was a little awkward, but still do-able and still quick.

Looks great in my son's kitchen and matches his new furniture, A stylish way to tidy his hats and coats (which were all over the place before) Excellent quality Had to drill one new hole to match the wall studs, but used a black screw and black felt tip Sharpie so can't even see the new hole and black screw

The plastic inserts, two screws, and screw-hole cap covers are what comes with the coat hook. I wanted to make sure it would not come down, no matter what, and seeing I could not put the enclosed screws into a 2x4 stud I opted to go for the " spring toggle bolts", readily available at most hardware stores. Make sure you purchase the 3 inch long bolts if you decide to go for this option. Size is on the box cover in the photo. Easy.....to.....Install Drill two holes in the wall board ( about 1/2 inch in diameter) EXACTLY where the pre drilled holes are in the coat rack. Push the bolts through the coat rack and then spin on the "wings " of the bolt Push the wings through the drilled holes The wings will flip out inside the wall Pull the coat rack toward you so the wings engage the inside of the wall board Tighten the two bolts using a screw driver and the coat rack will be slowly drawn to the wall. Tighten screws, (do not over- torque,) and push the "button" caps in the holes to cover the screw heads Ready to hang anything except, maybe, an elephant.

The coat rack looks nice on my foyer wall and seems sturdy enough to hold 2 parkas and scarves and dog leash

Really think this is good value for money super pretty

What a great looking product. Easy to install, which took all of 5 mins or less. Product was shipped in a secure box with bubble wrap. The hooks were a tad loose but that was a 20 sec fix with the screwdriver. Looks great in my hallway and holds jackets without a problem.