Stay Cool, Stay Connected! ❄️
This General Replacement Remote Control is designed for Midea MrCool Pioneer Air Conditioners, featuring a sleek white design, infrared connectivity, and a maximum range of 10 meters. It operates on AA batteries and is compatible with a single device, ensuring you can easily manage your cooling needs.
| Colour | white |
| Network Connectivity Technology | Infrared |
| Maximum Number of Supported Devices | 1 |
| Controller Type | Button Control |
| Compatible Devices | Air Conditioner |
| Battery Types | AA |
| Maximum Range | 10 metres |
K**I
Works for pioneer mini split
Good replacement for the mini split mine is a pioneer and it worked perfect. I only read Celsius so when you change the temperature it changes in multiples of 2°F. But if you need a remote for your mini split it works just fine
T**N
Temperature in Fahrenheit does not increase linearly
Not sure if I got a defective unit or if these are all the same. The unit came with temperature set to Celsius, but I was able to change to Fahrenheit by holding down on the temperature button for a few seconds.The problem is in Celsius, each temperature button push correctly results in a 1-degree change, from 17 to 30 degrees Celsius. However, in Fahrenheit, the changes are inconsistent. It mostly goes up by 2 degrees, sometimes 1 degree. Here are the temperature numbers that the unit produces, in Fahrenheit:63, 64, 66, 68, 70, 72, 73, 75, 77, 79, 81, 82, 84, 86.Also, the temperature numbers sync up with my AC unit (MrCool) only from 66 to 72 degrees. Beyond that, they diverge by 1 to 2 degrees each time you click the temperature up or down button.
T**N
Calibrated in centigrade
Works great but displays in centigrade
R**R
Read out in centigrade not Fahrenheit
Getting a reading in degrees centigrade, it can’t be changed is awkward. Hard to understand.
Trustpilot
2 months ago
1 week ago