LCR Meter Test Leads BNC Male Plug Test Lead Kit Set, 4-Wire Kelvin Clip Alligator Electrical for Component Testing Clip

Very good quality Kelvin clips, with a good jaw opening and strong spring to guarantee a solid connection. The wires are very pliable and seem to be of very good quality. The BNC connectors are all-metal and have spring strain reliefs, which might help with preventing kinks to the wire. Also, I was able to perform full short/open offset calibration on my bench LCR meter GW Instek LCR-821 even at 200kHz, so they are an excellent option for these types of equipment.

The cable is much better quality (and lower resistance) than 3 other test leads I have used in the past (with similar price)

These are bi-polar test leads otherwise known as Kelvin clips. These are designed to be used with an LCR meter which is a specialized piece of test equipment for measuring inductance, capacitance and resistance of electronic components. The set contains two sets of test leads. The clips are well constructed and are of overall good quality. The bodies of the clips are sturdy ABS plastic with gold plated brass ends. Each clip is connected by a pair of good quality discrete low resistance shielded test leads that are bonded together and BNC-terminated. I don't actually have an LCR meter so I can't say how they perform with one. I needed a set of bipolar test clips because I often have need of attaching clips across small components and the bipolar nature of these clips is a lot more convenient than either an SMD probe or conventional test leads. I found quite a few LCR test lead sets on Amazon including some that were already adapted with banana jacks for use with a multimeter. Although I found some that were less expensive they appeared to have distinctly cheaper construction compared to these.

Well-made 33 " specialized LCR Test Lead Kit that includes two high quality, gold plated good sized, alligator clips that are connected through shielded cable to Male BNC connectors. Testing these test leads, measurements were accurate and worked well with my LCR meter. As you can see with the enclosed pictures, the alligator clips fit very well on small surface mounted devices (SMD) and I had NO problem with the clips slipping ! Looking at the alligator clip in the close up, you can see the test lead set is well made and should last and remain reliable ! With the correct adapters , this test lead set can be used for other test equipment that are not designed with BNC connector inputs. The high-quality alligator clips and the well-made shielded cables would make other excellent test leads as well. Although this is a specifically designed product , the quality and overall electrical clip holding ability was really appreciated.

Good quality LCR leads with brass alligator clamps and BNC connectors. Everything is well marked and the cables have good shielding for less noise interference. These are good low cost LCR meter leads and should work with all units that use standard male BNC connectors.

Works well and no way to replicate at that price point.

I am always trying to find good test leads to meet every need. The truth is that one must be ready to switch leads constantly to meet the case at hand. These test clips have separate conductors on each side, so if you want to grab onto a disc capacitor for instance, you can hook to both leads with one action. The springs in these are strong and they hold the clips on the part well. The large handle that made it easy to operate the clip, also makes it hard to get into deeper tight spaces. The leads are as advertised, but shorter than I would like. I am sure the shorter leads are better to prevent noise pickup though. All and all, I am glad to add these to my test lead collection for the times they work well.

I got this to use with oscilloscopes and signal generators. After I got it had second thought it may ground out but each side of the clip is considered a separate channel. I think these were more made fro ESR meters, etc and the second lead on each clip is like a reference so that the tool can be set to ignore the electrical properties of the clip leads.

I'm happy with this set of LCR leads. The cable itself looks and feels good, and the kelvin clips are solid with a very firm spring pressure. The jaws mesh perfectly, and the gold plating on them looks to be a reasonable quality. All four BNC connectors fit my meter securely and don't wobble loosely or feel cheap. I like that the two sets of cables are banded red/black to easily identify which is which. I think for the price, the BOCEUC LCR meter leads are a great value. Obviously you're not getting Keysight or R&S levels of quality here, but these are still totally fine for homelab use.

BOCEUC LCR Meter Test Leads BNC Male Plug Test Lead Kit Set, 4-Wire Kelvin Clip Alligator Electrical for Component Testing Clip 29.69. Good quality Kelvin clips for LCR meters. The resistance was exceptionally low. Everything about these clips is good.