Humidity Dome Kit 5x8 w/ LED Grow Lights & Seedling Heat Mat | 3mm Thickest Dome w/ Vented Panels, Samsung LM301H EVO LEDs, 10 x 20.75" Heat Mat, for Germination, Propagation, and Cloning

I spent some time reviewing different options for seed/clone propagation from simple trays to auto cloners. Decided on this kit as it had everything needed for a good solid start and had a dome extender for taller clones. The kits comes on one box and was well packaged to prevent any damage. Everything appears to be well made and thought out. Even the packaging was a step above most less expensive options. Items were protected with heavy plastic zip bags, foam inserts and cardboard. The humidity dome is solid plastic and should not break with casual handling. The dome extender is easily put together with included screws/wingnuts. The extender allows for seedlings up to about 10" in height to fit under the dome. Several other reveiws noted that they didn't receive the extender. There are several products offered in the product description and the Large Dome kit does not include the extenders. Be sure the check the specific product you are ordering to insure it includes the extender if you want that. All other items included in the Full Dome kit were exactly as described. The seedling tray is even a good plastic thickness to last over many uses. The seedling openings are 1.5"x1.5" at the top and slightly taper down towards the bottom. Rockwool cubes of 1.5" square size will fit all the way down in these. There are two dome lights which fit into notches at the top of the dome not tight enough if turned upside down but not sloppy either. As some reviewers have noted, the dome lights extend almost to the edge but are one LED short on each side. I didn't see this as a defect but rather the way to kit was designed in case you choose to use different lights than what was included in this kit. The light controller has several scheduling options so you don't have to use a timer. The heat pad is a bit longer than the dome itself. It's controller is more simple in that it just adjusts from low to high but no exact temperature reading. All in all, this kit is well made, includes all that you need to start or for small operations. You can certainly get by with DIY options or buying everything piece by piece. But if you'd rather have everything in one set and ready to get started for a reasonable price, this is a very nice kit.

I love this seeding done. High quality. Heat mat is great. Easy setup. My seeds grew fast and healthy.

Functions well, easy to setup, gives plants best chance at germination. As described Started 3 year old seeds with 80% germination rate with this.

Tiny but strong. I I wish it was taller and the functionality with the lice connected. If you have to remove the dome for whatever reason they make the cable short. It was easy to assemble, but I do like is the moisture retention

This thing has to be the sturdiest humidity dome/propagation tray out there, which is good considering the price. The lights it comes with are bright enough for basically any plant you could want to germinate. I did petunia seedlings/cuttings and it worked great, and later swapped to using it to grow carnivorous plants that also liked it. The in built timer was not to most intuitive but works well once setup, and the controller is general is great allowing for control of the light intensity. I had some mold issues but that was user error. My only wish is that they would include a small notch in the plastic riser or base to route a usb fan cord though. It would be nice to have air movement in the high humidity dome without opening the vents to the outside air lowering the humidity.

It seems durable and it was easy to assemble. I have a bunch of AC Infinity gear and the quality is generally pretty good. But that's all been talked about already. What I want to talk about specifically is PAR light levels. You need to understand them if you want your seeds to sprout and start off strong. After I assembled the dome (without extension) I put my PAR meter at roughly center of the grow tray. Keep in mind this is not a professional meter and this was in no way scientific. I understand the PAR will vary around the tray a bit, but I'm not going to map it because I'll never have it full anyway. So the readings were from the CENTER only. What I found is that you are probably going to want to use the extension even if your seedlings won't get that big before transplant. Without the extension on, PAR varies from 23 on LVL 1 up to 111 on LVL 10. That's too low for cannabis. When the extension is installed the PAR goes up a little more than 3x. LVL 1 is 73 and LVL 10 is 360. That is a perfectly acceptable range. Also, with the extension on you then have two side and two top vents. This will work better for air flow purposes. The point here is the instructions make no mention of this topic. It basically just says use the extension or not depending on plant height. After measuring the light output levels I would recommend that it should probably be used from the beginning. Keep on growing friends. Also you're going to want a thermo/humidity digital gauge to stick inside there. They are cheap and work well, I have them all over my house.

Love this System Dome & tray is sturdy and made from rigid plastic not thin flimsy plastic like the cheap set ups , Controller is fantastic Giving you options sunset to sunrise settings ,scheduled runtimes, or constant on or off You can select your light intensity-from 0-10 , 0 being off , heat mat is nice with its own temp controller so you do not over heat I was hesitant because of the price but those concerns are long gone so happy i pulled the trigger and so will you go ahead its worth every penny

Works as advertised

The quality of the dome itself is good, but I’m giving this one star because of the heating mat. Even at the lowest temperature setting, it got so hot that it melted the plastic of the dome. That’s unacceptable and potentially dangerous. Definitely not what I expected

Das Set ist wirklich gut durchdacht. Gerade für die Keimung von Samen und die Anzucht von Stecklingen bietet es sehr gute Voraussetzungen. Licht und Temperatur lassen sich passend steuern, und die Wasserversorgung ist für die An- und Aufzucht völlig ausreichend. Besonders praktisch sind die verschließbaren Ventilationsöffnungen, mit denen sich die Luftfeuchtigkeit gut regulieren lässt. Sehr sinnvoll finde ich außerdem das Zwischenstück. Sobald die jungen Pflanzen etwas größer werden, schafft es den notwendigen zusätzlichen Platz, ohne dass gleich das gesamte Anzuchtsystem gewechselt werden muss. Insgesamt ein praktisches, durchdachtes und flexibel nutzbares Anzuchtsystem.

I heard some complaints about the large size, so bought the medium kit. I have purchased several types of humidity domes, some quite expensive and I wasn't happy with them. The AC infinity medium kit is the perfect humidity dome. I now have 4 of these. Build quality is excellent, lights are very bright, attach to the dome, and are very efficient (LM301H EVO!). Accessory package is impressive as well. They are more expensive then other domes, but are worth every penny.

Livré avec prises anglaises, pour le même prix que la filiale française du fabricant, qui livre avec des prises françaises - mais était en rupture de stock... Cher mais bien conçu. Le tapis chauffant est tout de même dépourvu de thermostat, et dès que les plantes s'approchent du plafond de la serre, il est indiqué de retirer les couvercle et de fixer les lampes plus haut, ce qui n'est pas forcément faisable chez tout le monde... On a pas mal de fils et deux boitiers de réglages à gérer. Ce n'est finalement pas plus pratique que de combiner une serre, un tapis et des lampes achetés séparément, à part qu'on a qu'un seul achat à effectuer.

Samen sind hervorragend Gekeimt, Licht Einstellung ist Spitze, vier Öffnung für Frischluft ist völlig ausreichend habe Sie kaum genutzt, Mit der Heizmatte habe ich Ideale Temperatur Bedingungen einstellen können. Sämlinge haben sich super entwickelt