183068 MaxSteel Heavy-Duty Bench Vice 150mm 6-inch, STA183068

Brilliant, it's nice and big and solid, the addition of having rubber grommets on the handle ends is nice to reduce noise when you let go of the handle The mounting holes are rather large, I used 10mm bolts with large thick penny washers and serrated flange nuts to secure it to my bench, you could easily use m14 or m16 bolts for this, I used M10 because my drill chuck has a 10mm limit and I don't own any reduced shank drill bits in a larger diameter - I torqued the nuts and bolts down and tigthened the rotation handles and the unit is solid and does not wobble or move about at all, You will need a spanner to hold the hex of the bolt in place while you torque up the nuts as the holes are really close to the body of the vice and you'll struggle to get a socket on them. I'd recommend greasing up the threaded rod with a tacky grease as it comes dry and makes a bit of noise when spinning the handle which i quickly found to be a bit annoying. I might look into dismantling the rotation locking handles and filing down the caps to be hex so i can adjust the rotation using a socket as the handles are very primitive.

A very good price for a genuine Stanley bench vice. This is a big heavy lump of solid metal that takes some moving, and can be bolted to a bench for extra security. Purchased for pressure assembling what amounts to a wing nut from a steel screw and an ABS head unit that has to be compressed on the screw. I can guarantee we will find plenty of other uses for it too - an ecellent purhcase and great value that worked as expected first time.

*********************** **Update** Dropped 1 star because swivel base turns under high load. I was trying to calibrate a 28-210 Nm torque wrench with the square drive in the vice, and even with both handles fully tightened it spun the base at around only 100 Nm. Had to put torque wrench in the vertical plane instead. *********************** Solid. The max bolt size you can use to bolt it down is M16. I got 80mm length to give ample opportunity for use in a thicker workbench if needed in the future. It is a good solid vice that should last, but a few improvements would be: - M16 bolt heads protrude up just enough to scrape the underside of the vice when you spin it. A touch more clearance would be good. - Mounting instructions would be helpful for a lot of people, including mentioning the M16 bolt size. I did some research and found the best way to mount it was on the corner of a workbench so that you can rotate vice to be on either edge of the bench. Also, the vice only has 3 bolt holes (not 4 like some of the smaller editions) and you have to be careful if you want to be able to put a vertical upright piece going in the vice because for that you need a small amount of overhang of the base so that the vice face protrudes just beyond the vertical plane of your bench. It is possible though, see pics, but not sure the triple bolt pattern is the best design for this kind of mounting. I'd be happier with 4 bolt holes and a better positioned vice face to minimise overhang. - It is difficult to get good soft jaws for this vice, I got Draper 14180 ones. This means that as others have pointed out the 2 magnets happen to align exactly with the inset bolt holes in Stanley 6-inch Bench Vice resulting in reduced grip and lack of centre. Since there doesn't seem to be much of an alternative currently available you will need a fix if you want soft jaws. Here's one: Fix: Buy a small pack of 10mm diameter x 5mm depth neodymium magnets for around £5. These fit perfectly in the inset bolt holes of the Stanley vice jaws. This not only keeps the soft jaws centred on the vice jaws, but also adds a good amount of extra holding force making it just about right - not too weak and not too strong. I got ones advertised as having 3.5kg hold force if touching. I measured just over 6mm depth of the inset holes so that gives about 1.5mm clearance (soft jaw magnets are also slightly inset) which is perfect as it keeps the magnets from physically touching the soft jaws which would then be too strong for convenient removal and also quickly wear. Be careful to get the poles of magnets orientated the right way before you put them in the bolt holes of your vice as they will repel the soft jaws and are so strong that once they are in they are hard to get out (unless you have spare magnets, though is possible to with 2 small flathead screwdrivers to wedge out bit by bit).

Well chuffed Been putting it threw its paces and impressed so far Perfect for any workshop 👌🏽 And the price compared to what’s out there.. class

Nice solid vice! I wasn’t sure it would be but it’s great for our use as farm workshop. No expensive as it’s solid with well machined parts. Good clamping force, large handle and solid base for fixing to bench with large coach screws in 3 places. Recommend for the money.

really wonderfully engineered vice. Will last many generations, i'm sure. I wanted something that allowed me to hold things in place without having to set up the workmate every time i wanted to do something. installation:I used 12mm bolts (or thread) and nuts to install this (not included) firmly to my wooden workbench. It has the ability to rotate which i don't currently need, but you do need to rotate it to install the threads, and tighten the nuts. i didn't use coach bolts per se, but actually used one of those long pieces of thread that you can buy, and used a hacksaw to create 3 x 80mm lengths, putting nuts and washers at each end. It also has an anvil at the front which you can use for knocking all sorts of things and extended family members ( :-) ) into shape if you so wish... I put some extra grease on mine before installing, but mine came ready greased. The 4" jaws meet well. The rotation feature means you can use on two edges of a workbench, although it would have to be on the RHS of the work bench for the handle to be able to move freely. Just a thought.

Not having had a workbench for some years I at last decided to get one, and naturally wanted a mechanics vice to go with it. A swivel vice was new to me, but looked handy, so I went for the Stanley MaxSteel 4″/100mm. First lesson: a swivel vice, unlike a fixed one, requires at least one fixing hole to be close to the edge of the bench. The bench I’d ordered had the top rails going right up to the edges of the top. Luckily chopping a small section out of one corner of the front rail fixed that, and I was able to bolt it down using all three holes. So if anyone considering doing the same, well, it can be done, though it would probably make any true woodworker shrink back in horror. I was very pleased with the result; it doesn’t seem to match my memories of my father’s old Record vice, feeling a bit roughly finished, and with a bit more play than I remembered, but that may well just be my memory. It certainly works well enough, and the swivel base is reassuringly solid; it only takes a slight amount of force to lock it into place. Only one minor gripe. The jaws, at least on the one I got, are about 104mm wide. Not normally a problem, but I also got a pair of Record Irwin fibre grips, which are 102mm wide – presumably to fit 4″ jaws. With a good deal of bending and hammering they’ll fit, but I’d have been happier if they’d slotted into place correctly. Though this is probably of no consequence, the vice and the box both described it as being a Stanley FatMax, not a MaxSteel, though Stanley’s own website describes the 1-83-066 as being ‘MaxSteel’. I have no idea if this anomaly makes any difference. Also the product description gives the weight as 12kg. It’s actually about 7.5kg.

amazing when you break something how much you can end up missing it - even though before you hardly noticed it... sometime ago i broke my bench vice & i DID MISS IT - it was like every other day something came up that needed it to be fixed/cut/bent/etc... a handfull of days after i bought it, i got it & it's every bit as good as it looks. i mounted it immediately on my workbench &....VOILÀ : 1 - nicely finished & feels quite sturdy 2 - smooth opening/closing 3 - nice parallel, even jaws 4 - if anything, i find the swivel base to feel slightly flimsy but i trust Stanley to live up to it's reputation on top of that since i payed 0 for shipping such an heavy item ALL THE WAY to Portugal AND the vice cost me like 2/3 of what it would cost here for an equivalent quality, i will still give it a 5 star rating well done Amazon - this is exactly why i seldom bother to go to shops anymore : a few clicks + a few days & it's sorted !

Perfect for my man cave. Very sturdy vice.

Polecam

Fast delivery. Great product.

El precio para la calidad es inmejorable. Es robusto y a agosto del 2026 el precio q sido de unos 78€ en reacondicionado.. entregado en su caja original... Creo que la devolución fue por no tener el color negro de la caja... Es más bien un gris... La gente se a vuelto un poco gili... Repito calidad... Tamaño... Preciso en el cierre... Robusto... Perfecto, recomiendo el de 150mm.

Just perfect DIY project in my shed, great product and value for money