LED Strip Light White

Well I'm hoping it stay 5*. I have attached it inside my horse trailer. Work super . Just hope sticky stuff works ok. Will know over time. But tbf they are great and easy fix. I cut the ends and just attached to wire. Then stuck and cut off tape. Super easy.

These lights are very bright, they have a strong adhesive and stick well. They are easy to install.

very good led lights,

self ahesive works well in metal shed

when they arrived they looked very flimsy they come in 5m coils i removed the plug and soldered a 2core .5mm round cable then put some shrink wrap over the joint then wired them into a led driver (you can put them on a 12v alarm battery to make sure all is ok before wiring to led driver as i did) they are well worth the money if you can do this as you can get multiple lengths out of each reel they also stuck to the underside of the kitchen units with no problem and are very bright all in all very happy

I read a lot of reviews on led strips, and in the end bought these, and I am very happy with the purchase. They arrived on time, and I was unaware they arrive on two spools, with a female connector already fitted. I have several transformers off old gadgets, and soon found one that fitted. I used them cut down to light two display cases, so had to cut and solder the connections, which I found easy, as at certain areas along the strip solder is applied to the + and - areas, so soldering was easy. The led's are super bright, and they stuck really well, at the moment its early days, but the adhesive seems to be fine. So I know these are not the cheapest on Amazon, but I would certainly recommend this item.

I bought these to use in a home made airbrush booth, I looked around at various options for led strips, but this one caught my eye as it contained two 5m spools of legs, each with a standard barrel jack socket and with a 3M adhesive strip ready for sticking where needed. I measured the current draw on each strip at 1.11A (12V) at maximum brightness. You can find PWM controllers here on amazon which will allow you to modulate the brightness down to any level between off and on. You cannot wire one strip into the next as the voltage drop across the strip would be too high, but if you have a power supply that can source enough current, you can drive both led strips at the same time from a single supply, you will just need to wire both strips directly back to the power supply. Really happy with the product, absolutely perfect for what I needed.

Generally ok but a few of the LED's are a bit dim. The Adhesive is very strong but I did get a bit that seemed to have less adhesive and that keeps falling down (only a 3" strip). But a bit of superglue added will fix it. So ok for the price but don't expect 100% quality control at these prices.

Billig, enkel att använda och lyser med starkt vitt sken. Har sett ljusare LED strips men den är klart tillräcklig. OBS! Köp nätaggregat här: https://www.amazon.se/gp/aw/d/B019IHQND8?psc=1&ref=ppx_pop_mob_b_asin_title

Très bon produits

Good quality. Easy to install. Size is perfect for under cabinets. We usually don’t use a remote control with these lights. We connect them to a wall switch. Light level is perfect. Never had a light burn out. Only had to change out the power adapter after lights were on 24/7 for 5 years

Bra produkt som passar min önskemål

Svagt lyse , passade inte till det jag skulle ha dem till