Tacwise DGN50V Air Brad Nail Gun, Uses Type 180 (18G) / 20 - 50 mm Nails, Orange / Black

No mis fires, no jams in using with over 1,000 nails. I previously had the mains electric version which would jam frequently or not fire at all. Of course you do need an air pump with this and I used the Titan which I use for 6 other jobs as well

Amazing as all Tacwise stuff is!

Absolutely brilliant fired in 50mm brads without any issues Use it for fixing fencing boards saved hours

Fed up with useless cheap mains nailer I decided to opt for an air nailer. Never misses a beat and great value for money. Now, where can I find a quieter compressor?!

First nail gun so not great knowledge on this. Thought Tacwise make nails so would know how to make a nail gun. It comes in a plastic carry case with oil and an Allen key. Works fine but you have to adjust pressure to limit the force. There is a fixed limit to the depth which puts the nail heads about 1mm below the surface - more expensive ones have an adjustable depth stop which would be nice if working with thinner material or wanting them deeper so you can sand/remove material afterwards. The nail feed is mostly steel but the exposed end part is plastic so could get broken if you drop it .. it has not so far. The air exhaust is at the top pointing forward and down - I thought this was OK until I got a full face of it when concentrating on a fiddly nail job; it sure made my eyes sting for 10-12 seconds. More expensive tools exhaust down the handle; I thought other reveiwers were being picky but it is a big blast of air right into your eyeballs when you get it wrong. Nice new toy and great for tacking fiddly things and hold parts while they glue.

Had one for a while, and it’s been great. I use it daily in my workshop with 20 - 50mm brads and it works flawlessly. Leaves no strike marks just the nail hole, and that makes life so much easier. I dropped it from a fair height and snapped the head, contacted Tacwise customer support and they had a new one sent out the next day, so can’t fault them for that. I like the unit so much I now have three for different size brads. Highly recomended.

Wow! This brad nailer is simply amazing! I am a keen DIYer who likes the put my hand to many things and having this tool in my arsenal is making the world of difference. I did quite a bit of research before committing to buying a nail gun and this one came out on top every time. It comes in a bright orange plastic case with lubrication oil and an alan key. Everything in the storage box has its place so you don't have anything floating around damaging things. The nailer itself comes with the newer euro airline fittings which are shorter and fatter than the older style 1/4" fittings. I only have the older 1/4" fittings so it was a simple case of unscrewing the fitting it came with and screwing the older one in. I am running my compressor at 90psi which is below to maximum this nail gun can cope with and it works perfectly with good nail penetration into a variety of wood types. Loading the gun can't be simpler and there is a handy indicator to let you know when you're out of nails. I've used 20-50mm nails and so far not had a single jam. If it does jam the handy quick release function allows the jam to be cleared easily. Overall I am extremely happy with my purchase. I am currently contemplating adding the 64mm finish nailer to my collection too.

I actually found it hard to find 50mm stainless steel brads - I did not want galvanised as they will rust and stain the wood over time. At least with stainless steel the chances are greatly reduced. Tacwise as a brand I have used before so I went for them, and I bought a Tacwise pneumatic nail gun to fire them. So,, 1,100 nails later, not a single misfire or jam. I am very pleased. One thing I really missed was a hook to hang the gun from my belt between uses, and I couldn't find an aftermarket one either. This is probably a workshop tool normally, but as a trim or second fix nailer it could be used anywhere. Also some rubber sides would be nice to stop it scratching up or sliding when laid on the floor. Minor gripes, the function is brilliant. Now I have just over 900 left in the pack and I need a new project!

Dies ist mein erster Druckluftnagler und ich bin froh ihn gekauft zu haben! Der Nagler ist sehr gut verarbeitet und liegt angenehm in der Hand. Die Tiefenverstellung funktioniert hervorragend was sich bei der Montage von Sockelleisten als sehr nützlich erwiesen hat. Es gibt zudem beim nageln dank dem Gummischutz keine Dellen im verarbeiteten Material. Meine anfänglichen Bedenken ob mein kleiner 9L Implotex-Kompressor aureichen würde haben sich schnell in Druckluft aufgelöst;man muss ja als Heimwerker auch nicht "50 Schuss Dauerfeuer" geben ;-). Wer auf der Suche nach einem bezahlbaren Nagler ist kann hier meiner Meinung nach bedenkenlos zugreifen! Klare Kaufempfehlung!

Très bon produit a voir dans le temps

Ottima chiodatrice funziona benissimo , come già riportato da altri utenti l'involucro di plastica è veramente scadente ma io l'ho già piazzata nella parete attrezzata con le french cleat

Perfecta! Calidad 10 no hace marca en la madera me gusta!!!!

Preis/Leistung sehr gut Qualitativ sehr hochwertig aus Stahl und trotzdem leicht. Ich hab das Gerät mehrmals im Einsatz gehabt, ein paar mal klemmten die originalen Tacwise Nageln fest, muss ich jetzt mal beobachten. Die Kiste könnte auch gerne etwas größer sein damit genügend Ersatznägel rein passen.