Dockem Koala Wall Mount 2.0: Damage-free Universal Dock for Smartphones, Tablets, eReaders: for iPad 1, 2, 3, 4, Air 1/2/3, iPad Mini, Samsung Galaxy Tab and Note, Microsoft Surface Tablets (Black)

These are great for phones, tablets & speakers too. It does exactly what you'd expect it to do. I found that whilst the rubber pads close the gap on the device I use (surface pro 6) it also caused it to wobble. Where as with the rubber strips it lies completely flat against the wall. It works a treat in the bathroom. I'm very impressed by how well it performs. As I've been wanting to wall mount it for while now, as well as my other devices. To which I can safely say it does a remarkable job of doing so. So impressed infact, I've bought several more. My only gripe is the adhesive strips. They damaged my bathroom tile. I know that's the strips themselves not the actual product itself. I would recommend getting some Gorilla mounting glue tape. Absolutely brilliant. It's transparent & sticks to anything. It's perfect for these.

Good quality and value

Good product, but for 4 screws and 2 bits of plastic it is probably overpriced, lost a star as the bottom screw on my right hand side bracket is smaller than the hole so if I tighten it up then it just goes flush against the wall, however the top screw is holding the bracket on the wall and i have loosened the bottom screw so that the bracket hits the screw with any movement so it seems to work fine for the moment, the sticky parts that go on top of the screw area means this is not visible, the left side bracket is fine. Update: I have changed my rating to a 5 star, dockem contacted me following my previous review and are going to be sending me a new bracket and allowed me to keep the first. I would have given the product 4 star originally without the hole issue but dockem are the first company to contact me following an Amazon review to ask about the fault in the product and not try to defend an the issue, they also acknowledged what I said about the price and I take on board that this is a niche market and manufacturing costs for each component are going to be higher when a product is not produced on a mass scale.

Did the job for me . Everything I needed was in the box . It would probably be better in landscape because my Fire 8 is a bit wobbly at the back . I use the tablet to control my Sonos and a radiator so it’s not going to get much hammer . Not many other options on the market so went for this and happy enough.

I regularly use my iPad to watch the morning news, whilst taking a shower. Even in this moist environment, I know that my iPad is very safe, securely fastened to the wall. The v2.0 even holds my iPad, complete with a keyboard case, folded behind it. It’s an ideal fit! The v1.0 I use in my shed, to watch streaming TV and movies (I spend a lot of time in there!). The V1 fits my iPad case, but not quite with the keyboard. This is, also, ideal, because the spacing of the two hooks means there is room for my keyboard portion of the case to hang down, so I can still use it...bonus! If these hooks ever fail (which I cannot see happening!), I know I will be straight back to buy more. Thinking of just how easy they are to install, I will probably buy more, f9r different rooms in the house. Excellent design - sleek and unobtrusive, allowing full view of the screen. Endlessly customisable fit for any product size. Sturdy and make me feel very, VERY safe, knowing how well they hold my iPad. I found a little gem of a product and have already told several of my family and friends about them. Happy, happy Customer. Adding to my sense of satisfaction was the short follow up email, checking everything was OK. ...nice touch, from a growing business! Thank you, folks!

Complete waste of money. Two small plastic corner pieces with stick on rubber inserts to suit the item being supported. They have to be carefully attached to the wall to match the width of the device. The sticky pads supplied were not sticky and failed to support itself never mind the weight of any Galaxy Tab. Because I had already stuck the rubber inserts in, I was unable to then screw them to the wall as the screw holes were covered over.

I decided to repurpose a Kindle Fire 7 as a permanent console for my Home Automation and needed a low cost way of fixing it to my wall. These Koala 2.0 Universal Mounts from Dockem are ideal. They're made from plastic that has a certain amount of malleability, which means they're not brittle and will withstand being used. They come with four sets of self adhesive rubber padding strips, depending on the tablet you're using you might have to combine two sets to get the perfect fit (as I did). The built in cable guides allow you to route the charging cable across the bottom of the tablet and it will be hidden from view, and will also retain the cable if you need to remove the tablet. The design of the sides of these bracket allows access to the volume controls of the Kindle Fire, but it depends on the placement of the controls on whichever tablet you are using. It is obvious a lot of thought has gone into this product when you see the progress from its predecessors. The only negative I can see is that the holes for the supplied screws are slightly too big, and if overtightened the screw heads could force their way through and so not hold the bracket. But anyone that's at all DIY competent shouldn't have any issues. If you don't want to drill holes in your wall, two command strips are supplied, I didn't use those so I can't speak to their suitability. I would certainly recommend these, and would definitely buy more if I need to attach any more tablets (or even mobile phones) to the wall.

Diesmal schreibe ich das Fazit ganz an den Anfang: Ich bin von dieser Wandhalterung begeistert! Wir haben nach einer Wandhalterung für unser Tablet gesucht, damit wir es über der Küchenarbeitsplatte an der Wand montieren können. Und das möglichst ohne bohren zu müssen, denn die Wand wurde gerade frisch verputzt und gestrichen. Als die Wandhalterung kam, waren wir erstmal etwas skeptisch. Es sind lauter Einzelteile und die Anleitung ist etwas seltsam. Irgendwie bekommt man es dann aber doch hin. Die Wandhalterung hängt, ohne gebohrt zu haben.... und geht direkt ab, wenn man sie auch nur ein bisschen berührt. Der Klebestreifen fühlt sich dabei auch nicht wirklich so an, als wäre er fürs "Kleben" gemacht. Enttäuscht haben wir nochmal in die komische Anleitung geschaut und da steht, dass man das ganze erstmal ein paar Stunden einfach an der Wand in Ruhe lassen soll... und anschließend soll man für mindestens 12 Stunden an jeden Haken der Wandhalterung eine Tüte mit 2 gefüllten Wasserflaschen hängen um den Härtetest zu machen... oookaay, bevor wir es zurückschicken probieren wir das halt mal aus... Ich habe keine Ahnung, was hier für eine Magie passiert, aber aus irgendeinem Grund verwandelt sich dieser Klebestreifen, den man nicht mal als Fusselroller benutzen könnte, innerhalb dieser wenigen Stunden an der Wand zu einem richtigen Kraftprotz und übersteht den Härtetest problemlos. Es hält wirklich bombenfest... um ehrlich zu sein, habe ich keine Ahnung, ob wir die Wandhalterung je wieder abbekommen. Sie hält jetzt schon seit mehreren Wochen das Tablet fest an der Wand, ich bin wirklich begeistert. Sehr gut finde ich auch, dass man die Breite der Wandhalterung individuell einstellen kann - je nachdem für welches Gerät sie gedacht ist ( Das muss einem vorher schon klar sein, denn es ist sehr hilfreich, wenn man das Gerät mit anhalten kann, wenn man die Wandhalterung befestigt.) Klare Kaufempfehlung!

I bought this bracket to mount my Pixelbook in my gym while doing cardio. I have to admit that I was a bit skeptical when I opened the package as the brackets are made of plastic, however we mounted them with the screws using a level app as recommended and the brackets work great and are very sturdy. Tip: the first time we installed the bracket we mounted them flush on the Pixelbook- when I would slide the Pixelbook in, it would turn the power off. Be sure to consider your buttons and leave a few millimeters of space to allow for them. The brackets come with a number of silicone spacers- these really helped to secure the device. Great product- thanks!

Sehr guter Artikel

سعره مرتفع

Ich benutze die Halterung für ein iPad Pro inklusive Case und Cover. Das Anbringen war Kinderleicht und konnte mittels Wasserwagen-App einfach durchgeführt werden. Werde auf jeden Fall noch mehr davon kaufen und kann den Kauf nur empfehlen, wenn man sein Gerät gerade in Bettnähe oder im Raum elegant aufladen möchte oder einfach verstauen.