Tungsten Carbide Cutter Pointed Tip 3.2mm (9903)

Brought this to remove the locking wheel nut spinning collar after my Key broke leaving me unable to remove the bolt. When it arrived it didn't look promising as was smaller than expected (although to be honest there wasn't much room to work) however this powered through the hardened metal of the collar in no time at all, no sparks just ground away the metal. No visible wear on the tool either - 5 stars

My #1 most used bit in my case. I've used this dozens of times on stainless 316, titanium, plastic wood and it's been great. Still performing like the day I got it 6 months later. It is quite aggressive tho and will chew right through softmatierals quite easy. It can also grab quite aggressively sometimes. Having said that it's still my #1 go to, all around bit, that lasts while doing a great job.

Cuts quickly, appears to be fairly hardy so I expect it to last and it's small enough that it allows access to small places. I got it for cutting out motorcycle bearing races and it's very effective for that.

I have always liked Dremel tools and have quite a collection in my workshop, all of which get used on a regular basis. I purchased this bit as I was working on a project which involved carving stainless steel. The bit was used in a Dremel rotary tool, did the job beautifully and is still sharp, exactly as expected from a company whose products are well made and trustworthy. These Dremel bits are tough.

I'm currently getting into woodwork in support of a fairly major PC case building project. As part of this project I've been looking at methods of creating large wooden shells (in this case an ovoid) built up from several layers of 20mm pine which are cut to shape and then bonded together. Once dry it is necessary to remove the excess wood. Initially I'd attempted this with a chisel set but this proved to be awkward, inaccurate and highly time consuming. So I thought I'd give this a try. It is absolutely superb for the job. It allows controlled removal of wood and provides a method of quickly and easily removing the bulk of the excess wood prior to finishing with a sander. It does gradually fill with wood dust but this can be removed by burning with a gas torch (like a chef's torch). I bought this at the same time as two of the proxxon rotary rasps which also perform well, however I would say that this is the better of the three as it takes longer for it to become clogged with wood residue from the cutting process. Cracking product and supports rotation at 35000 rpm meaning it only requires a light touch to remove material.

Very good quality.... I've been using it to cut off the drive shaft nut on my BMW ... Cuts through steel without any hassle I would buy again if i this one will ever go bad 🤣 without giving it a second thought.

Bought the cylindrical version to destroy an extremely hard "easy out" bolt remover broken inside a bolt, and it worked, so I have no complains (it's tough and sharp and there is no heat), except that it is rather short at 38mm. However, in the same purchase from Amazon I also got the 'Yakamoz' carbide burrs set (same hardness carbide bits, great piece of kit) which costs £11 for 10 pieces. These 'Dremel' carbide bits cost £9 EACH so I am giving three stars because of the price.

I bought this to grind through a broken bolt extractor which itself had snapped in the bolt leaving me worse off than when I started. Sound familiar? I was impressed with the way this bit went through the hardened bolt extractor like butter. Once loosened I was able to drive the remains of the extractor out with a punch. I then continued to grind out the softer belt and best of all due to the accuracy with which I was able to grind the bolt outwards from its centre, the thread of the tapped hole was still intact and usable. Well worth the money and there's not a scratch on the bit itself so good for more mileage for my next emergency. Excellent.

Sehr guter Fräser für meinen Dremelakkufräser. Bearbeite damit Kunststoff, Alu und Holz. Geht sehr gut an das Material und lässt sich sehr gut führen. Trotz schon einiger Nutzung immernoch schön scharf!

outil attendu, arrivé rapidement

This will cut through almost any steel like butter. But it is brittle and can break, so be careful using it.

good cutter

Ürün ilan resmindeki gibi.İyi ürün.İş görüyor.Tavsiye ederim.