Quartz 9000 NFC 5W30 Engine Oil - ACEA A5/B5, API SL/CF - Age-Resistance Technology - Fuel Economy Formula - Advanced Synthetic Motor Oil Lubricant - 5L

Just as good as Castrol, but less expensive

middle shelf oil but still good quality oil !

My engine seems to be burning oil for some reason, it's not easy to get oil in local garages that suit your car so off to Amazon to get the right one. This has definitely worked in keeping car going until I book in to garage, thankfully it's not urgent YET. Super quick delivery and brilliant service.. definitely value for money.

Great quality oil that I can't fault

Ok

great value

I have used fully synthetic oil for so many years and done 300,000 miles in one car 200,000 in another car with no engine problems or exhaust emission problems and always done an oil change between 6000-8000 miles or every year and a good quality oil filter is just as important as a good oil which total oil is and would recommend it. Total oils are used in motorsports Formula One, Rally events, Endurance, Paris-Dakar, etc. MANUFACTURER APPROVALS FORD WSS-M2C913-D FORD WSS-M2C913-C (Backward compatible with FORD WSS-M2C913-B JAGUAR LAND ROVER STJLR.03.5003 Satisfies technical requirements of VOLVO ACEA A5/B5 API SL/CF Viscosity grade-SAE J300 5W-30 Density at 15° kg/m3 851 Kinematic viscosity at 40°C mm²/s 54 Kinematic viscosity at 100°C mm2/s 9.8 Synthetic oils bring main advantages over conventional motor oils: Superior temperature resistance. Synthetic oils can safely handle higher operating temperatures without breaking down. Synthetic oils are thus recommended for hot climates as well as heavy-duty, turbocharged or hard-use applications. Better low temperature performance, making easier cold starts. Synthetics flow freely at extremely low temperatures (-30 °/- 40° C) Better Engine Protection. As motor oil travels through the engine, some of the additives can be sheared, literally cut in half, by high-speed engine parts, thinning the oil. Full synthetic motor oils resist shear under heavy loads better than conventional oils. This helps synthetic motor oil maintain its viscosity grade, enabling it to offer better engine protection and withstand more extreme engine conditions. Lower oil consumption. Synthetic motor oils experience less "boil off" than conventional motor oils. A good synthetic will lose only about four percent of its weight when run at 400 degrees for six hours, compared to a 30% loss for a conventional petroleum based oil. The lower evaporation rate means less oil consumption between changes. Cleaner engines. Synthetics don't break down or sludge up as fast as ordinary mineral based oils do. This means that the short trip to the store and back or a lot of city driving in the winter does not accumulate sludge in the engine as fast and lubrication efficiency is maintained. If you have any questions please ask. Please click on the “Yes” button below if this review has been helpful. Thank you.

good