Bemis 5000AR Chicago Toilet Seat - White, 48.8 x 37.8 x 6 centimeters

Nice shade of white which sits well in an off white bathroom. I like the fact that this is a wooden seat but looks clean and fresh. It appears to be ethically sourced so appeals to me and my own ethics. I thought being wooden it would be warmer to sit on but it still holds the cold, and in a tiled bathroom it can get a bit chilly! Found it very easy to fit. I started screwing the bolts from the bottom but they started to catch on the toilet bowl, so the screws are designed to be tightened from the top too (so don't fold down the little flaps until its fitted), a brilliant idea! The little flaps fold down to cover over the screws and make it look neat and tidy. Its been in place a couple of weeks now and it hasn't budged with a varying array of person sizes. I've had seats in the past that slip to the side and feel unbalanced but this one just sits there neatly doing it's job, with no unwanted surprises. It hasn't picked up any stains or discolouration and wipes clean easily. I only use Method cleaning products so nothing harsh. I had another toilet seat to replace and thought I would try something more budget, wasted my money, should have bought another of these. Best price and quality I could find I think!

I bought this to replace a very cheap Homebase toilet seat. The previous one was horrible; the hinges were a nightmare to attach, the seat ended up wobbly and in the end the hinges and bolts rusted. Yuck!This Bemis toilet seat is completely the opposite. It was SO easy to attach - it literally took less than two minutes. The nuts and bolts supplied are (good quality) plastic so they won't rust. To attach the seat, all you need to do is line the holes in the seat to the holes in the toilet bowl, pop the bolt through, and then hold the small handle-thing on the nut while screwing the bolt in tightly.Once on, the seat looks good and is sturdy. The hinges are just right - the lid opens and shuts easily, but doesn't randomly fall down. The seat looks nice (or as nice as a loo seat can look...). Very pleased with this.

This is a good seat with a sensible aperture unlike some!What I found most helpful is that the screw heads for the plastic retainers are accessible from above because of the lift up flaps behind the seat. If you have a stupidly shaped bowl like mine that won't allow you to fully screw on and tighten the nuts below then get them as far as possible and tighten from above! Brilliant!

I asked the Amazon community: "Is it easy to remove this seat when (eventually!) it has to be replaced? Answers: "It went on easy enough so I cant see why it shouldn't easily be removed when needed to." Another "Easy to fit - will be just as easy to remove" And another "Two adjustable screw threads easy to fix and easy to remove." And one more "Yes, untighten 2x wingnuts and replace. However, these are quality seats so should last many years." That last comment is the only answer out of the 9 I received that has some truth in it! I was replacing this after 10 years which has to be good.But it is just because it lasts that it is so difficult to remove! You cannot every week or year clean the gunk under the hinge without completely removing the seat! See my photos! The gunk unfortunately makes the screw that went in so easily 10 years ago a real pain to remove. It is very long as you can see from my pictures. Unnecessarily long by a long way I would say. You need a flat-head srewdriver with a good size head. You have to hold the nut underneath and then the screwdriver constantly slips out of its slot so it is a very long process to turn about 25 times to disconnect such a long screw. Towards the end it becomes easier and the nut can be hand turned. If you have a bad back as I have you can do this only a few minutes at a time. It could easily take an hour to do. It is no fun at all.Don't let this stop you buying this seat. The paint on mine still a lot better than some reviews would have you think. It would have been 5 stars if the screws had been a lot shorter and easier to remove! You will certainly enjoy your times sitting on it!

This toilet seat arrived promptly & was well packaged.It is made from recycled, moulded wood & is glossy white in appearance (At first glance, you might think it was plastic, but look closer and it has a smooth, glossy sheen that you don't get with a plastic seat)The hinges are plastic & so might crack after some years of use. However, I prefer plastic hinges to metal ones, as the metal can become discoloured when it is around moisture, bleach etc.The instructions supplied described how to fit eight different types of hinge & the diagrams were perhaps a little small (so it made it slightly difficult to identify which hinge you have) However, this is a very minor quibble, as you could probably fit the seat without referring to the instructions (particularly if you've just removed your old seat)How easy it is to fit the seat, will depend partly on how easy it is to access the back/underneath of your toilet pan. But it just requires putting a screw into each hinge & then tightening a bolt on the underneath of the toilet. It took me approx 5 mins (including unpacking the seat from it's box) and I'm no DIY expert.You could possibly fit the seat without using any tools. But you might find it easier if you have a large, flathead screwdriver.I've only had the seat for a couple of days, so I can't say for certain how durable it is. But I have had similar designs of seats from Bemis before and they have lasted 10-15+ years (it's usually the hinges that go)All in all, I'm completely happy with my purchase, so I'm giving it five stars.

Excellent. Way better than any of the wooden seats I've had over the last decades! Easy to fix from the top and totally stable. Would recommend this to anyone.

Perfect fit!

Having bought Bemis Toilet Seats before, I had no hesitation in going for this one when my old seat broke beyond repair. It is beautifully finished and is great value for money. I much prefer the plastic hinge fittings, considering them more hygenic than the metal, chrome plated ones which tend to tarnish. The actual fitting of this seat is very simple. The hinged cover allows easy access to fit the strong plastic bolts which can be secured from above the seat by means of a screwdriver while holding the securing nuts. Usually you have to fiddle about, blindly, under the back of seat to get a secure fitting. The finished, fitted result is extremely pleasing.Highly recommend.

Acquistato altra volta prodotto ottimo non fa ruggine e si monta facilmente. Consiglio l'acquisto

Se adapta perfectamente a a mi taza y eso que es un modelo antiguo y poco común. Resistente de buen material mucho mejor que las universales que puedes comprar en cualquier sitio

Hab schon ewig nach einem vernüftigen Toilettensitz, der auch Preislich ok ist!, gesucht.Bin endlich auf diesen hier gestoßen... War schon immer sehr skeptisch, weil es eig an jedem Toilettensitzt etwas zu beanstanden gibt... Ka warum aber ist so... Der eine hat sitzt einfach nicht feste und Verrutscht ständig oder die Befestigung an der Toilette mithilfe der Schrauben hält einfach nicht richtig. Oder es rostet!... Darf nicht.Der weisse "Bemis Chicago 5000AR Toilettensitz" sieht sehr gut aus und ist sehr stabil. War erst etwas geschockt das die Befestigungsmaterialien nur aus Kunstoff sind, aber die Gewinde sind 1A hergestellt worden. Passen sehr gut ineinander und der sitzt hält Bombenfest! Das kann man nicht oft erwarten... Aus Tedox oder so sind die Schraubverbindungen meistens schrott...#Der Deckel lässt sich (nur) Rechtwinklig aufstellen, daher sollte man vernüftig damit umgehen und den nicht nach hinten Überdehnen!Würde das vl in einem nächsten Model verbessern, entweder das man den bis zum Anschlag an den Wasserbehälter anlegen kann oder im Klappmechanismus einen Metallkern einsetzen, damit das noch stabiler ist. Der Deckel ist mit der Klobrille etc mit Schrauben aus Stahl befestitigt, bis jetzt scheinen die Rostfrei zu sein. So muss das aufjedenfall auch sein! Da kommt immer Wasser oder "anderes" dran :DKlare Kaufempfehlung.

1) vraiment parfait, belle qualité, belle couleur blanche, confortable, très facile à poser, vis en plastique donc ne rouillent pas, double position et écartement pour visser donc s'adapte forcément à n'importe quelle cuvette2) deux tous petits défauts, sans gravité : d'une part la fente de la vis est trop mince pour visser avec une pièce de monnaie donc il faut un très grand tournevis pour serrer (moi par exemple le goupillon en dessous bute un peu sur un bord de la cuvette donc je suis obligé de finir le serrage par la vis au dessus), et d'autre part il faut mettre un petit patin (petite rondelle autocollante) sur la cuvette d'eau pour éviter que le couvercle de la lunette fasse du bruit en cognant dessus lorsqu'on le relève

Montage ultra facile, il y a assez de mou entre les entraxes des toilettes, c'est parfait comme ça.Pour le montage rien de difficile pas besoin de la notice qui est de toute façon pas trop en rapport avec le modèle reçu.Le plus fragile ce sont les vis, j'ai conservé les anciennes vis au cas où, on sait jamais avec mon gros popotin. LolC'est vraiment pas cher et vous avez une bonne qualité, du bois et c'est parfait.Une peinture brillante qui m'a l'air bien épaisse.J'avais acheté des lunettes en plastique pour le même prix à Babou.Je n'aurais pas dû elles m'ont pas durer longtemps.Difficile de faire son choix sur le site, il y en a pour tout les goûts.J'ai mis du temps à les choisir car beaucoup de mauvaises critiques un peu partout.Je me suis lancée et pour l'instant pas de regret.Faites bien attention au dimension, sur l'annonce il y a une image sur toutes les côtes de la lunette, alors vérifie bien que ce soit bien compatible avec vos toilettes.À voir avec le temps.