Belkin Car Cup Mount For Smartphones (Cup Holder Mount Compatible With iPhone 14/14 Plus, 14 Pro, 14 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, 12, 11, XS, XR, SE, 8, Samsung, LG, Sony, Google, More)

Excellent phone holder, this was bought for a Smart ForTwo / ForFour 453 - these cars are problematic for putting a phone holder anywhere because of the unusual dashboard layout which prevents one from being fitted in most places. This is pretty much the only solution to the problem in one of these cars and works very very well. The cup holder mount works flawlessly and is adjustable to fit different sized cup holders by means of turning a wheel to make the sides expand out with rubberised arms to grip the insides of your car cup holder. This gives a very secure grip, and the expanding arms of the phone grip have good tension on them to hold your phone securely and is also adjustable to move up/down/left/right for a good viewing angle. The phone holder opens wide enough to hold my iPhone 8 Plus but won’t open much wider than that, but phones don’t get that much bigger than that anyway. Recommended for cup holders at the front, but doesn’t work well in narrow openings next to the handbrake in my Renault Clio IV as room is too limited to be useful.

Excellent. Typical Belkin quality. May cost a bit more than other similar items but the quality outweighs the expense.

Despite owning a 3 year old £50K BMW if you have an android phone the car doesn't allow for screen mirroring. That luxury is only afforded to iPhone users. The car has a decent sat nav with real time traffic information. Often Google Maps is still better. There are some comical cup holder car mounts with long bendy necks that remind me of those cheap desk lamps from the 80's. Apart from looking stupid they put the phone up too high in the way of the Aircon. Media, iDrive etc. In my old BMW I used to balance my phone in the cupholder without the need for a device like this. But on this model the cupholders have retractable fins to hold the cups in tight meaning I can't balance my phone. What I like about this model is; 1. It takes 30 seconds to fit and can be removed as easily 2. It's very short so the phone sits under all the controls without getting in the way 3. It's completely stable. No. Really. Speed bumps, sudden braking, the phone stays in place. 4. The position is easily adjustable. 5. It looks good quality once fitted. It's a little pricey but after looking at every model on Amazon, Halfords, Argos etc this was the obvious choice.

I purchased the cup holder version. For my car, which has no gear lever or handbrake near my cup holders, this works really well. The top of the base twists and expands the base to fit firmly in the cup holder. In my car, the position is ideal as it does not block any controls. You do ideally need both hands to load the phone as the side clips need to be pushed at the same time. So, with one hand, start to open them, then slide the phone in. Many holders are like this, but if you want easy, one handed phone-loading, then it may not be ideal. Once locked into the cup holder, there is plenty of movement. You can spin it like a propeller or twist it to turn the phone flat like a mini table. The only restriction is twisting it left and right. For example, if you position the phone to face you, then you can't twist it right around to the passenger. This is because the ball socket is supported by vertical brackets. This means the phone is very stable, but limits the amount of twisting. For me, I wanted stability and rarely need a passenger to see the phone. They could always fetch it out the holder if essential or you can loosen the grip in the cup holder and twist the whole unit. Overall, very well built, grips the phone well and no phone vibration.

Good product. Solid feel to it. Fits into cupholder, and you turn a ring that expands the stem in the cup-holder so that it stays firmly in place. It holds my Iphone X which can be angled as I like with enough clearance to let me plug it into the charging cable without a problem. A bit pricey, but worth it, I feel.

This phone holder is perfect for those who don’t have suitable air vents or dashboards for using standard device holders, and no messy suction cups that block your field of vision when driving. It has a good weight to it so feels very well made. You put it into your cup holder and twist a grooved ring which expands the main body, ensuring a snug fit for all sizes of well. The ball joint is firm and allows for repositioning of your device without shaking or sagging. Best device holder I’ve ever had. If you have a suitable cup holder, you can’t go wrong with this.

My experience with suction/windscreen phone holders has always ended with the holder and phone detaching from the windscreen and inevtiably falling into the footwell while driving. There are many unknown brand cup mount phone holders available, but most have a long neck which means the phone will vibrate while driving. This is is pricey, but it works. It locks firmly into the cup holder. It's 'stumpy' and therefore sturdy. It convincingly grips my wide heavy phone which doesn't vibrate while driving.

I’m on my third one of these, so have some experience. On the one hand it is simply the best cup-holder phone mount I can find. I use it every day to securely mount my phone where I can use Waze to augment my in-car sat nav. It also makes choosing music much easier to have the phone mounted firmly and easy to reach. When new it is sturdy and stable. It takes seconds to install by placing in the cup holder and screwing the collar which expands three padded legs to pressure fit the mount into the cup holder. It is nicely designed and the spring mount grips my iPhone well and it doesn’t fall out. My only gripe (and the reason I am on my third one) is the ball joint gives way, cracks and breaks after a year or so of use. The black plastic that forms the socket of the ball joint becomes brittle, possibly due to sunlight exposure, over time and then starts cracking. Once enough small pieces break off the ball joint becomes unusable and the phone won’t stay put. I haven’t found anything better. But if you purchase this please consider that you will have to replace it every year or so.

ممتاز جدا- بس غااااااااالي .

Supporto per cellulare da inserire nel portabicchieri auto. Si adatta perfettamente in quasi tutte le macchine dotate di alloggiamento per bicchiere e specie nelle Fiat 500L, non dà alcuna interferenza con il cambio. Il prodotto è molto valido e anche se il suo costo supera altri tipi di supporto per smartphone, ritengo che è costruito ed assemblato con ottimi materiali e come si vede dalle foto allegate, giunge in una bella confezione. Le guide scorrevoli sono in acciaio e non in plastica come per altri prodotti e ritengo pertanto che durino nel tempo. Le ganasce internamente sono rivestite di ottima gomma resistente in modo da tenere fermo il cellulare, senza danneggiarlo. Ho scelto questo tipo di supporto in quanto non sono di mio gradimento quelli per alette aria, primo perché bisogna tenerle chiuse per evitare il surriscaldamento del cellulare d'inverno e poi li ritengo antiestetici perché espongono molto alla vista il telefono. Il pacco è arrivato ben imballato da Amazon (perfetta azienda) e prima del previsto. Pertanto, in base al mio gradimento sull'acquisto, mi sento di consigliarlo senza alcun indugio, perché ritento Belkin una ditta molto affidabile.

Se acopla muy bien al portavasos y en principio la calidad parece buena y sujeta bien el teléfono así que es un buen producto para mi gusto

Workmanship is excellent. Installation is easy with a quick twist to tighten holder in the cup holder. Ample room for ant cell phone with case which can be displayed in portrait or landscape mode. Fully adjustable. Allows for easy connection for charging and CarPlay.

Stabil, flexibel und absolut zuverlässig – perfekte Handyhalterung für den Alltag! Ich habe schon einige Handyhalterungen ausprobiert, aber die Belkin Kfz‑Becherhalterung ist bisher die beste Lösung für mein Auto. Sie sitzt bombenfest im Getränkehalter und wackelt selbst auf holprigen Straßen nicht. Besonders praktisch finde ich, dass sich die Halterung 360° drehen und zusätzlich um 90° schwenken lässt – ideal, wenn man zwischen Navigation im Hochformat und Mediensteuerung im Querformat wechseln möchte. Der verstellbare Sockel passt sich perfekt an verschiedene Becherhalter an, und die Kabelführung ist ein kleines, aber sehr durchdachtes Detail: Endlich kein Kabelsalat mehr! Mein Smartphone (iPhone 14 Pro) sitzt sicher, aber nicht zu fest – auch größere Geräte passen problemlos hinein. Fazit: Eine hochwertige, stabile und sehr flexible Halterung, die genau das tut, was sie soll. Für alle, die eine zuverlässige Lösung ohne Saugnapf oder Lüftungsgitter suchen, ist diese Becherhalterung von Belkin eine klare Kaufempfehlung!