KabelDirekt – Pure Copper Stereo Audio Speaker Wire & Cable – Made in Germany – 2x2.5mm² – 15m – (For Hifi Speakers and Surround Sound Systems, Pure Copper, with polarity markings)

I have been an amplifier enthusiast, and the birth of home cinema I also embraced from the early days right the way through to now. I don't pretend to be a "professional" like some of the 1 star haters. If they are indeed "professionals" then my God, standards have dropped. I will say it and get it out of the way. Take no notice of the 1 star reviews as they clearly know nothing. First consider the price. You would think by the way they go on about melting cables, insulation ripping whilst separating the wire or fitting plugs, yaba yaba yaba. There is nothing at all wrong with this speaker wire for the Home enthusiast. I will explain. Well, I've had 3 x 20m and every reel has been the full 20m everytime. I have used this on a 100wpc @ 8ohms Denon 7.2 system and that was driven hard as a cinema amp, and played for extended hours as a music amp loudly, I can do that as I live miles from other people, so no worry about complaints. I then upgraded to an even more powerful cinema amp, a Marantz Cinema 30 a £4000 140wpc 11.2 system, this too has been driven, just as the Denon, hard, and my wires haven't melted. With both of these amps I have kept the same speakers utilising 8ohms again, using old but excellent, Monitor Audio Silver Floorstanders, and Tannoy Large Box Satellites + 2 x 8" Powered Subwoofers, if it ain't broke, kinda thing. I did consider buying other speakers, but new speakers sound awful, and I didn't fancy breaking in for extended periods of time, maybe 100 to 200 hours of loudish sound, be it music or audio designed to speed the process up. I much prefer to buy far better quality speakers secondhand. Not only have they been already run in, but for the same money as a pair of brand new, mediocre speakers, think KEF or Mission. You can buy a really good pair of speakers for the same price costing many thousands when new. Thats a good tip for you genuine potential users. If you have reasonable quality speakers. Don't consider changing them unless there is a vast mismatch between a new amp output, and speaker handling. Run in speakers always have a warm soul about them, so don't chuck them., or if you can't use them, sell them on Ebay to offset the cost of a much better pair of speakers from the same outlet. I don't understand the haters out there, the ones giving it 1 *. These so called "professionals" are clearly not, if they can't strip wire without it tearing. For the price, the quality is very good. I would say, it's ideal for runs of up to, 40ft, and will easily handle I guess 180wpc @ 8ohm, you certainly wouldn't want to use this gauge on any larger run as the sound may start to suffer, any longer get the next thickest cable, 14AWG or if money isn'tan issue and you like to approach jobs, belt and braces, go one more to 12AWG, for any regular or larger house, this will more than suffice, just ensure it's solid copper wire NOT coated aluminium. Anything over this for the average enthusiast is overkill and a waste of money. You can get anal, and spend stupid money on thicker cable, but in all honesty, once you get beyond 14 or 12AWG, there is no point in going any thicker for the average home or cinema room. That is unless you have ridiculously long runs of over 100ft. I'm of the belief that the average enthusiast buying anything thicker than 10AWG if you have long runs. Anything more is the audio worlds equivalent of measuring d+cos, by people with little knowledge and more money than sense! The only stipulation I would say is worth bearing in mind, is the use of OFC (Oxygen free copper wire). If you are having trouble thinking i'ts better to buy 12AWG Aluminium Copper Coated Wire or 16AWG OFC Wire, always choose OFC, even though the aluminium copper coated wire is thicker, it's far more inferior than the not so thick OFC every time. Stripping wire and parting cables has never been an issue for me, not once. Forget these so called 1* "Professionals", if they are having the problems any of them are saying they are having then they are doing something wrong, very wrong. For the Home Cinema enthusiasts such as I, this wire is very good value for money and does its job very well. I have experienced 0 problems, I really don't know what planet they're on? Give it a go. If it's short then send it back, if it strips tearing the insulation, go back to school and hone your wire stripping skills, oh, and with the money saved on not over spending on needless thicker wires, buy a decent pair of strippers. The spend will be worth it, you will only need to buy them once! I highly recommend this wire. You're certainly getting the most bang for your buck There is a saying I recall. I may not get every word verbatim, but it goes something like; Those who think they know what they are talking about, are annoying the one's that do! Very apt, when looking at the rubbish the "professional" haters are leaving.

Good quality cable. improves the sound level. compatible for most hifi set up. highly recommend this cable. good value for money

This cable’s built for clarity—oxygen-free copper (OFC) gives clean signal flow with minimal loss. 2.5mm² thickness handles power well, ideal for full-range speakers or longer runs without drop-off. Transparent sheath looks tidy and lets you see the copper—adds a pro touch to installs. Polarity markings are clear—no guesswork when wiring up. Flexible enough to route through tight spaces, but tough enough not to kink or split. Great for home audio, van sound systems, or site setups where you want reliable wiring that won’t need replacing. Perfect for anyone who wants solid audio cable without faff or signal compromise. Minor gripe: no spool—comes coiled, so prep takes a minute. 👍 Pros ✅ OFC copper—clean signal, low resistance ✅ 2.5mm² thickness—handles power, long runs ✅ Clear polarity markings—easy install ✅ Flexible sheath—routes easily, no kinks ✅ 50m length—plenty for full setups 👎 Cons ❌ No spool—manual uncoiling needed ❌ Not pre-cut—measure and trim yourself ❌ Transparent sheath—may show dust over time

Having spent a fortune on cabling before, burying it in the walls and under the floors, this time I wasn’t going to spend as much. Bought this and again secreted it under floors and such to keep things tidy. I really cant tell the difference between this and previous much more expensive cables. Maybe it is all a scam and there is little difference, well unless you use the doorbell type cable and that really is a bit pish. The only other factor to take into account of little or no difference is the old fart’s hearing, with age it goes downhill, along with mental process, eyesight, sporting prowess, bedroom antics, patience with the younger generation, though we do excel at one thing – being grumpy. So I may not be able to discern any real difference but it could be the aged ears, the moral being that as you age your Hi-Fi equipment can be cheaper as you will never tell the difference and hammering out 70s and 80s was never about the fidelity, more the volume. Worth getting this for over 50s, if younger and you like to brag about your setup, go spend a fortune on something that sounds no different but gives you massive bragging rights

This is by far the best speaker wire that I’ve dealt with & I was born a chronic music listener so I go through systems extremely fast despite my care for them, now sometimes I keep the speakers from a bust system to add to the new system because those speakers were so good so I’ve got speakers all over meaning speaker wire all over, or rather I used to have, basically I’ve used a lot of speaker wire & this is the best that I’ve used. It’s thick, it’s quality copper filled wiring, you get a good length of it (I think I got 10m) it’s easy to slip into Banana Plugs a little trickier to get it straight into a system because if it thicknesses but it’s doable it’s just little tricky. You will need cable strippers/cutters for a precise great job with this wire & a Stanley knife to carefully slice through the rather tough middle to separate the two ends for spacious connecting areas. I get a great sound using this wire & certain Banana Plugs & Speakers.

Excellent wires, just be sure to check your size and the fitting on you appliance or amplifier for the correct size wire

Very thick cable for the money,well worth the money

High quality cable, exactly as described.

Prima Duitse kwaliteit, voldoet aan de eisen die je mag stellen aan een goede, koperen luidsprekerkabel. Meer dan voldoende om je speakers van een goed signaal te voorzien.

Reçu le câble Audio de 30 m, installation aussi tôt et là ! très bonne surprise, je trouve un câble malléable, facile à dénuder, très costaux et qui tient bien en place, franchement génial. Une fois branché aux enceintes, ampli allumé, un CD dans le lecteur et Hop ! le son arrive et là les bras m'en tombe une super écoute pas grésillement dans les enceintes ou de coupure, un son pure et dur. Qualité Allemande irréprochable, de très bonne fabrication et à un coût très, très abordable. allez s'y foncez les yeux fermés.

urun tekrar stoklara gırmelı. inanılmaz kaliteli ürün tavsiye ederim. yakından takıp edıyorum stoklara gırdıgı gıbı 2 adet daha alacagım.

These cables were an excellent upgrade to my old cables that came with my Harman Kardon 5.1 system. The audio now is much more crisper and detailed and I have noticed a clear difference in the sound. My speakers were always good and these cables finally do justice to their capability. Very happy with the purchase and I will buy more cables of this brand if required in the future.

Söylendiği gibi saf bakır, Logitech Z906 ses sistemim için aldım. Eski kablomla uydulardan alamadığım bas seslerini bu kablo ile aldım. Bas seslerinde fark edilir bir düzelme var. Z906 nın bas ve uydu hoparlör kablo girişlerine göre bu kablo biraz kalın geldi, rahat kablo bağlantısı için bu sorunu şöyle çözdüm; kablo uçlarının 1 cm lik bölümünü lehim yaptım sonra pense ile yassılaştırdım, sorun çözüldü. Eksi yanı ise; kablo çiftleri birbirine çok yakın imal edilmiş, 2 kablo arasında kesme mesafesi için bir kaç mm boşluk olmalıydı ama öyle değil, neredeyse birbirine yapışık gibi çok az ayırma mesafesi var, kablo ucunu sıyırmak için yaklaşık 10 cm lik 2 li kabloyu ayırırken eğer elinizle ayırırsanız kablo yanlış yerlerden yırtılıyor, bakır açığa çıkıyor. Bence en doğru yöntem; kablo ucunu düz masaya koyup bir falçata ile dikkatli bir şekilde 2 kabloyu birbirinden ayırmak.