FLSUN 3d Printer Square DIY Kit Touch Screen Auto Leveling Printing size 260X260X350 with Auto Level heated Bed Precision (Touch Screen+ Dual nuzzle)

So this is just first impressions as I am still assembling the kit. I will update/do another review once finished.It appears that the "dual nuzzle" (please correct to dual nozzle) it exactly that NOT a dual extruder, but the kit comes with a spare nozzle (either that or I am currently assembling the wrong model.Everything is held together with cable ties (which in itself is not an issue) BUT it does not come with enough (or at least the kit I have has not). I have ONLY used them where stated and have not (yet) messed any up and I have run out and am unable to complete the securing of the first belt. This means that I have to stop the build and go source more cable ties from somewhere else - not happy!.I have also found that the steel rods used for the drive mechanism are not quite straight, this means that they bind at certain points in the bearings at each end when rotated , I think this will affect the use (though to try it I need to source more cable ties). And I think I will end up needing to buy some decent stainless rod as replacement - but we will see.Oh - I also have one of the small synchronous wheels stuck on one of the stepper motor shafts , not sure if its the shaft tolerance or the slightly rubbish synchronous wheel (this is my suspicion) - so I also need to deal with this (somehow).Thats as far as I have got so far as I cannot continue without the for mentioned cable ties.So update on my review and downgraded to 1 star, here's why:I turns out that I actually did not get what I ordered, only finding out after a lot of build work ( > 10 hours). Startrd assembling the Board and Screen to find out that what I bought and paid for and what I got delivered as miles apart. What I now thing I actually got delivered was this item:https://www.amazon.co.uk/FLSUN-Leveling-printing-260X260X350-Precision/dp/B072N2SWGF/ref=pd_sbs_328_5?_encoding=UTF8&psc=1&refRID=MTB8N82Y4DGE299RYYQRNo Dual Extruder/nozzle/nuzzleNo Touch screen = just the standard 2 line LED displayNot sure if this is the sellers fault for mislabelling the box that Amazon stock and deliver or just Amazon picking the wrong item and sending it. But almost completing the build to find out you don't have what your ordered until the last few steps.And Amazon customer services ONLY solution dismantle and return ( so another few hours of de-construction ahead) all that effort for nothing. What a shambles!

I've been wanting to buy a 3D printer for some time. It was hard to decide which printer to buy, in the end I went for one that supported a range of filaments, could print a (for me) reasonable size, had positive reviews from people who were serious about 3D printing. I went for this one and I have no regrets. It took most of a weekend to build the printer. The instructions that came with it are very detailed. I had a couple of issues with parts with holes not in the right place, easily fixed with a drill. A few Google visits were necessary to learn about the tension of the time belts, but that was it. Have been printing for a couple of days now using the supplied PLA using designs from the internet - I'll try other materials at a later stage - and the results have been far better than anticipated. Great printer for a serious beginner. I was sent a printer with an LCD screen rather than the advertised touch screen. I contacted the seller to make him aware of this, but also said that I was happy with having the LCD, but he promised to send me a touch screen. Very kind and happy to recommend this seller. Added a photo of a design I downloaded from the internet. It was printed using the supplied PLA. I used blue masking tape to cover the printing bed (good for printing PLA). Also worth noting is that the printer works well with the Macintosh version of the repetier software.

I have recently purchased a Flsun cube printer, after assembly, I had a couple of problems trying to start it off, I contacted the company regarding my problems and spoke to a guy called Joseph he adviced my how to test for the faults then sent me the replacement parts which I fitted and now the machine works great, I am new to 3D printing and was very grateful for the support I was given and therefore would recommend this machine and the company to anyone wanting this type of printerL Shields