12-Sheet Peel & Stick Jigsaw Puzzle Saver: Preserve and Hang Your Jigsaw Masterpiece Without Hassle - Easily Frame Most Boards With a Stronger Adhesive That Lasts - New and Improved Version

We had never framed a puzzle before, but having spent a long time assembling a beautiful Lion King puzzle for our young grandson, we thought it would be nice for his room. Most advice we read online suggested that it is essential to stick the puzzle pieces together before framing it to avoid pieces coming loose. The reviews for this product gave us confidence that we this is what we needed and so we ordered it. Delivery was swift and the communications from the company indicated that they really are serious about customer service. We had to wait a bit longer for the frame (ordered from another supplier) but when we came to fix the puzzle it was a breeze. Firstly turning it over (sandwiched between puzzle board we use and a large sheet of cardboard) and then applying the Puzzle Saver paper. The self adhesive sheets are scored close to one edge which you fold back which makes it so much easier to peel off the backing paper. It took no time to use 6 sheets to cover the back of the 1,000 piece puzzle. I used a rolling pin to make sure that it achieved full adhesion across the entire area. I left around a millimetre of puzzle uncovered along each edge somthere was no danger of it showing from the front. And it worked perfectly! We still have another six sheets so if we decide to fix another puzzle, we can do so. We are very impressed!

Amazing product. Seller is very polite too with emails saying we hope you like the product! THIS PRODUCT IS AMAZING! I’ve used it on 4 of my puzzles so far and will definitely be purchasing more. I have another packet being delivered today ready to put on my puzzles this evening when home from work! Very quick and easy to apply and very very well held together. The people who put 1* obviously didn’t follow the instructions properly and toll with a rolling pin and leave a few hours before flipping the puzzle over because it works amazing and have added it to my auto buy so I never run out. Please never stop making this product!!!

This puzzle saver was easy to use and stuck fast to the back of the jigsaw. I followed the instructions and cut the pieces to size with some overlap and leaving a few mm at the edges of the jigsaw - I had a big 1500 piece (47x68cm) one so used several sheets. Once ready I stuck them down, rolling it down and smoothing at the same time, rather than than sticking them down flat, if that makes sense! I also went over them with a rolling pin to make sure they were properly stuck. As per instructions, I left it flat overnight and next day was able to pick it up in one piece. Perfect and ready for framing now :-)

I have used this product before and been very pleased with the results which is why I reoredered it. It is easy to use and makes framing the puzzle much easier. The customer service is very good and it seems that the company genuinely want to satisfy the customer; not something often found these days. The only small point I would make is that the sheets are quite small for a large puzzle so you need to use quite a few but the adhesion is good and I am very satisfied qwith the product.

Won't be ever using a pva glue for my jigsaw puzzles ever again. I used this product on a 2000 piece limited edition puzzle as I was so very wary of using glue, the product arrived very quickly, the instructions for use were adequate as it's a simple job, I laid the peel and stick on the back to see the best orientation then with help began the process of peeling the protective backing off and adhering them to the puzzle. It took a little time but I wanted a good strong job. Afterwards I sandwiched the completed puzzle between 2 Sheets of ply wood laid it Flat on the floor and added some weights,( books) and I left for 24 hours before hanging to wall. Now that at first was a puzzle in its self so my chosen method was to screw a 50mm X 20mm timber to the wall, same length of puzzle width then used heavy duty glue on Velcro. Worked a treat and is still on the wall as yet. I can recommend this product for its ease of application, strength and the clean method overall, no flipping glue everywhere. This is now my method of choice..

This worked perfectly. While it was difficult to flip my puzzle over in order to stick the sheets (took a few careful manoeuvres with pieces of card etc) the actual process of putting the puzzle saver on was so easy. I have a 1000 piece puzzle and felt the sheets didn't fit perfectly but i just cut them to the right size and stuck down. Simple! I didn't have a rolling pin as it suggested but I did just use my metal water bottle to roll over to ensure full adhesion. A wine bottle or something similarly hard will work. Great product and will use again for my next puzzle!

Used two packs of this for a 4,000 piece jigsaw. Never used it before. Followed the steps, didn't use anything to weigh it down as others have done (the size made it difficult to do this), just used the rollingpin as suggested by the instructions. Left it for 3-4 hours before propping upright. Excellent results. It is very sticky and slightly stiff so once you start to put it down it's not going to come back up without the jigsaw pieces attached, so if it is not lined up and you end up with a crease line, use a rolling pin to flattern it out and from the front there's no way to tell. Brilliant stuff.

There are some of my jigsaws that I want to keep when they are finished. Using this adhesive backing has made it easier to keep the jigsaws whole and then put in a frame. The paper is easy to use and the instructions are basic but are enough. I stuck the adhesive backing on and then used a rolling pin to help the adhesion. I left overnight and then the next morning I did the ultimate test and picked up my 1000 piece jigsaw and it was all in one piece. I did give it a little shake to make doubly sure and it still remained intact. \the backed jigsaw was then put in a frame and hung on the wall where it has been for several weeks. A brilliant product that I would definitely recommend, it is a no-mess way of dealing with jigsaws that you want to keep completed. I will be buying this again as I think it is excellent.

These were so excellent and very easy to use. I was also able to laminate a puzzle I loved because these held the puzzle together so well. I also used them on another puzzle I wanted to frame. Worked perfect. I did two 1000 piece puzzles but there was enough there I feel like it could have covered two 2000 piece puzzles. Will definitely buy more.

Super für Puzzle-Freunde, die ihr Bild länger genießen wollen und dabei gern auf die Matscherei mit flüssigen Puzzle-Kleber verzichten. Ich liebe puzzeln, nur ist meine Familie genervt, wenn das fertige Bild ewig rumliegt. Ich kenne die flüssigen Kleber und bin kein großer Fan davon. Diese Klebefolien sind klasse. Puzzle mal eben schnell aufs Gesicht gedreht, Puzzlefolien kurz ausrichten, Schutzfolie abziehen und schon kann das Kleben beginnen. Es dauert nicht lange und ist kinderleicht. Anschließend kann man das Puzzle mit den mitgelieferten Klebehaken auch gleich aufhängen. Tolles Produkt und sehr schnelle Lieferung

CONTENUTO CONFEZIONE: -12 fogli autoadesivi 38x19 cm -4 supporti in plastica per il fissaggio a parete Uno dei problemi nella realizzazione di un puzzle è come fare ad appenderlo o ,semplicemente conservarlo, senza il pericolo che vada in pezzi. Molti utilizzano una colla specifica che dovrebbe unire tra loro le varie tessere ma è un metodo non particolarmente pratico ,dai risultati spesso scadenti e che implica l'utilizzo di una cornice. Questo "salva-puzzle" si è dimostrato invece una soluzione estremamente comoda ed efficace. Il suo utilizzo è di una semplicità estrema e anche se sul retro di ogni foglio ci sono le istruzioni solo in lingua inglese, non è un problema, perché l'applicazione è un'operazione veramente elementare. Una volta terminato il puzze va girato e applicati i fogli autoadesivi nelle quantità necessaria per coprire tutto il retro delle tessere, che rimarranno unite conferendo la sufficiente rigidità per poter essere spostato in tutta sicurezza. I fogli in dotazione hanno un ottimo potere incollante e dimensioni tali da poter essere utilizzati per due puzzle da 1000 pezzi. A seconda della marca, Ravesburger, Clementoni, Schmidt, puzzle con stesso numero di pezzi possono avere dimensioni diverse. Nel mio caso il puzzle da 1000 pezzi della Schimidt una volta terminato misurava 98X37.5 cm e ho dovuto ritagliare l'eccedenza di un paio di fogli. I ritagli non li ho buttati ma li ho applicati giusto per dare maggiore rigidità. Alla fine il risultato è stato perfetto in 10 minuti il mio puzzle era appeso in bella vista utilizzando due dei quattro ganci autoadesivi in plastica trasparente presenti nella confezione. Consiglio , una volta applicati i fogli, di pressare bene le tessere (magari utilizzando un mattarello per stendere la pasta) in modo da farle aderire tutte perfettamente. Se volete conferire maggior rigità nessuno vi vieta di applicare due o più strati di fogli autoadesivi. Prodotto che mi ha veramente soddisfatto e permesso di appendere il mio puzzle senza dover per forza realizzare una cornice. Lo consiglio assolutamente per tutti coloro che vogliono conservare o appendere i loro lavori una volta ultimati senza perdite di tempo e spendendo pochi euro. Unico limite di questo prodotto sono per me le dimensioni del puzzle. Infatti fino a 2000 pezzi lo considero un prodotto perfetto, per puzzle di dimensioni maggiori, visto anche il peso, sarà comunque indispensabile prevedere una bella cornice e dei fissaggi molto più robusti. Per irrigidire è comunque una soluzione percorribile ,secondo me nettamente migliore della colla, anche per puzzle di grandi dimensioni, bisognerà solo utilizzare più strati di fogli.

Fácil de usar, sigues las instrucciones y es muy fácil. Pegó muy bien mis puzzles.. compré más para los siguientes puzzles que haga.

Great product