Aluminium 50mm Quick Release Plate QR Clamp Fits Arca-Swiss Standard for Tripod Ballhead

Excellent quality. Excellent machining does what I needed to do. Almost hard to believe it’s not more expensive.

This product was shipped and received on time. When I received it, the box looked like it had been open before with seals broken. There was absolutely nothing wrong with the box, just that you could tell it had been opened before. Now for the great news! GET THIS QUICK RELEASE CAMERA MOUNT! You will not be disappointed! It is heavy duty and constructed very well! The fact that it had two levelers on it is a plus! I looked for something to be wrong with it for this price point but I couldn’t find anything negative about it! I have a brand new Sony A7III that will not be subjected to inferior mounts. I have absolutely no concerns about this one at all! Out in the field it works flawlessly! The smooth operation of this very well constructed camera essential is well worth the money. Putting the camera on and off of my tripod is lighting quick and very stable. As a matter of fact, I will be ordering two more for my other tripods. Glad I came upon this. You will be glad as well!

This clamp is perfect, once I filed down my qr plates about 2 mm to fit. My old plates are 41mm square. This clamp says it'll take plates up to 42mm, but that appears to be the extreme width at the bottom of an angle. My plates aren't shaped to a fine point, so they were a little too wide for the space available. Once I filed down their sides to 39mm, they fit this clamp just fine, without affecting their fit on my other clamp, which tightens on the end. This clamp is very secure, after only a half turn of the side screw. -- I see other reviews complaining about the Allen wrench causing problems with the base screw, but I don't see the problem; I just removed the base screw and used the screw that protrudes upward from my tripod heads. I have a couple more tripods I may get this thing for. Very happy with it, after about 10 minutes of filing.

Most of the gimbals doesn't have built in ARCA mount. Most of them have their own mount or the video camera style mounts. I have ARCA plates on all my cameras, and I don't like to remove them and change the plates whenever I want to use the gimbals. So decided to get an ARCA mount to add on top of the existing plate on the gimbal. This makes it so much easier for me to switch cameras, mount or remove camera on my gimbals. The only thing is this mount is a bit thick. some of the smaller gimbals will not balance correctly. because the added height. It will be perfect if the thickness is a little thinner.

I have two of these units, one on my desk top tripod for my spotting scope and the other on my Caldwell lead sled to mount the adjustable clamp.

Was really surprised at the quality for the price! I have a small ballhead on a tabletop tripod that has a 1-piece 1/4-20 platform. This mounted perfectly to the 1/4-20 on the platform. I used a drop of Loctite blue to secure the threads. Tried about half dozen Arca Swiss style plates and all fit fine. Only added two ounces and the entire rig is still under a pound.

I've used these (I've bought several) to modernize old tripods. They are perfect for that. Do note the removable screw size converter. Considering the cost of similar accessories, these are a bargain. They don't look out-of-place on the best equipment. They are plenty sturdy. I've got one on a classic Bogen 3050, as well as smaller/lighter tripods, and it's up to the task.

I purchased several of this qr plates after I bought a Peak Design camera clip for backpacking. The plates make setting up shots on a tripod or steady cam while on trail super quick and convenient. Camera slides out of the PD clip and onto the tripod in seconds. The plate holds the camera (typical dslr nikon d90, 18-200m lens) really tight, never have had a problem, even when my camera is in a bird’e-eye-view position on a tripod. I trust it! I also appreciate the levels on the plate’s sides because my tripod is cheap and doesnt have any levelers. Great product

I am yet to use it properly but set it up with my new liquid head. I thought it would be clip type but it's a nut. Will get used to it but keep in mind you will not be able to pull the camera in and out in a flash. Looks sturdy.

I purchased this to attach my Peak Designs Capture Camera Clip (bag slip) to my Joby Gorilla Tripod for upcoming travels. The Product: -Very strong and tight -Great quality, doesn't feel it will wear out. -Has levels all around for ease. -Comes with an allen key for mounting. -Feels identical to other brands such as Neewer etc. Mounting to Joby Gorilla Tripod: 1. I removed the internal screw from the Harwerrel adapter. 2. Screwed in the Joby mount as normal. 3. Slotted it back into the Joby tripod. 4. Slid the Peak Designs clip in and clamped it on. 5. Easy! Highly recommend from Aus.

I wanted a quick release setup for my copy stand. I bought an Arca Swiss base plate which I attached to the copy stand thread. When screwed on the adjustment screw ended up sitting vertically - perfect. I simply attach an Arca Swiss plate on the camera to finish the easy to use setup.

Just needed something cheap for all of my tripods and these worked out well. Nothing special, but impressed for the price. Will probably buy more.

Works really well on my SmallRig Magic Arm! It's a higher quality piece than what my tripod came with, so I feel like you get your money's worth.