Question 1

Is there a trick for removing the cork from the spiral once the cork is removed from the bottle? I found it difficult?

Accepted Answer

I squeeze the exterior outer housing to secure the cork and then reverse the handle rotation.  It can be difficult on synthetic corks and occasionally real ones.

Question 2

The cork remained in the housing (that fits around the bottle) -- it was very hard to remove; what am I doing wrong?

Accepted Answer

You’re not doing anything wrong. It’s the stiffness of the housing  of the corkscrew. The only thing I’ve figured out to do (and the possibilities are few) is to squeeze the cork with your fingers through the two open slots formed by the housing and turn the screw to remove it from the cork. But, be careful. You can get pinched. And some corks are just extra solid or something. I once had to resort to pliers to grip the cork. Which is about when I switched back to using my Le Cruset corkscrew of very similar design. (It was once branded as a Screwpull model, and may still be.) It has a very sturdy black plastic housing, which is not near.y so stylish as the Henckels. But, the plastic flexes a little, and squeezing it firmly will grip the cork and faciltate extracting the screw. Good luck.

Question 3

Can someone please tell me how long the worm is on this corkscrew?

Accepted Answer

Taken out of the corkscrew and measured by itself, the screw is 4 3/16” long. When it is in the corkscrew, 3 5/8” extends out from the inside top of the  body of the corkscrew (that is, that’s how far the screw extends through the tube that goes over the neck of the bottle).  This seems like a nice long screw that would pull any cork you would encounter. Sadly, that’s not actually the case. Because of the way the corkscrew is designed, with shoulders on the inside of the body of it, it can actually fully extract a cork slightly less than 2” long. And I can tell you from extensive experience, almost no wines have corks that are under 2” long! So, the corkscrew pulls the cork most, but not all, the way out. You have to pull it out the last 1/2” or so. That’s not usually very difficult, but it’s definitely not always easy. And, if you happen to be opening a particularly fine bottle of wine, one made with aging in mind, it will probably have a cork about 3” long, and you’ll have to pull out the last inch on your own. Which can be quite difficult, and can easily lead to a broken cork that is quite difficult to get out without a lot of bits of cork winding up in the wine. Not good! So the short answer to the question of how long the screw is: not long enough. The problem is actually with the effective length of the inside of the tube, but it is functionally the same thing. Too bad! It’s a very nice looking tool and made of sturdier material than the similarly-designed plastic manual Screwpull cork extractor (several of which have broken on me while I was using them). But at least the Screwpull will pull a cork of almost any length you will encounter.

Question 4

Is this a continuous turn corkscrew? Or do you need to pull to remove the cork?

Accepted Answer

It is a continuous-pull corkscrew.  Once the screw reaches the end of its trajectory, further turns pull the cork up towards the casing of the corkscrew. Once at the top all you need is a gentle pull to remove it.

ASIN	B06VV8G52M
Best Sellers Rank	#155,121 in Kitchen & Dining ( See Top 100 in Kitchen & Dining ) #99 in Waiter Corkscrews
Brand	ZWILLING J.A. Henckels
Brand Name	ZWILLING J.A. Henckels
Color	Stainless Steel
Customer Reviews	4.5 out of 5 stars 60 Reviews
Finish Type	Brushed
Finish Types	Brushed
Global Trade Identification Number	00035886311582
Included Components	screwpull-levers
Is Customizable?	No
Item Dimensions L x W	2.25"L x 5"W
Item Type Name	Corkscrew
Item Weight	11.99 ounces
Manufacturer	ZWILLING J.A. Henckels
Manufacturer Part Number	39500-048
Material	Stainless Steel
Material Type	Stainless Steel
Model Number	39500-048
Number of Items	1
Product Dimensions	2.25"L x 5"W
Recommended Uses For Product	Camping, Travel
UPC	035886311582
Unit Count	1.0 Count

Sommelier Corkscrew Wine Opener, Stainless Steel

Details

Details

Description

Specifications

Reviews

Common Questions