NEEWERMetal Telescope Phone Mount, 2.09"-3.54" Universal Cell Phone Mount for Spotting Scope Telescope Microscope Binocular Monocular, Fits Eyepiece with Diameter 1.02"-2.05"

It is extremely well-made and will last years. Importantly for me, I needed it to fit to a large eyepiece with a diameter of 50mm, which it does, just, with 1-2mm spare. It is not light, but it is metal - it's a trade-off. It takes a little getting used to, but can be set up within about 1 minute, I guess. The results for me are okay.

I have had several Neewer camera products and have rarely been disappointed. This is no real exception.Having tried other mobile mounts for telescopes, this one definitely seems more suitable, don't expect stunning close ups with crystal clear shots though.The mount is movable, so you should be able to get it to fit your phone, but with my Google Pixel 6 Pro mounted to a small set of Praktica binoculars, it was a bit of an awkward fit, although I did get it on there.It has a cold shoe mount and a quarter inch thread to fit on most tripods, but I had to have my phone at a bit of an angle so used it hand held.The results are OK, but you will either need to zoom further with your phone to get rid of the shape of the lens, and any vignetting, or crop the photo afterwards. The amount will, I guess, depend on how close you can get your phone camera's lens to the eyepiece of your binoculars or scope.This isn't fantastic, but is definitely better than many. It is well constructed from metal, and feels like it should last. The photo with the red line drawn shows the image with no binoculars and no zoom.

Solid metal construction, good quality, works well

This phone mount (Model No. St-T01) arrives in a Neewer branded cardboard box. In the box were the mount itself, an instruction leaflet, and a customer service leaflet.Like most of Neewer’s products, this mount is well made with a good finish throughout. Being made of aluminium alloy it is also very robust, whilst remaining fairly lightweight. There are several rubber pads attached to the mount, in order to protect both the phone you are attaching, and the equipment (telescope, microscope, binoculars, etc.) that you are attaching it to.The phone holder can accept phones with a width of about 5.8cm to 8.3cm. It is removable, and as it has a ¼” socket in its base and a cold shoe mount on its top, it could also be utilised as a phone mount to attach your phone to a tripod or other accessory, should you wish to.The mount itself works well and is far better than the cheaper plastic types of mounts available. Compared to those plastic mounts, this mount holds the phone in-place much more securely and rigidly. As it is important to get your lens as parallel and as in line with your eye piece as possible, the stability this mount gives you, allows you to be much more precise when lining up your phone’s lens.In order to get the best image quality, as well as keeping the lens parallel to the eyepiece, it is important to get your phone’s lens as close to the eyepiece as possible. The resultant image from the telescope (or other equipment) is circular, so the closer the lens is to the eyepiece, the larger that circular image will be. You are also reducing any light coming in from the sides of the lens which might cause glare, reflections or other issues. However, both the size and shape of your phone’s lens ‘bump’, as well as the type of eyepiece you are attaching the phone to (it’s shape and whether it has rubber eye cups attached), can cause you to have to position the phone’s lens further away from the eyepiece than optimal, and the image quality can suffer as a result.Unfortunately, because everyone’s combination of phone and equipment will be different, there will be no way of knowing exactly how good your results will be until you try. As a result, although I do highly recommend this mount, I am only able to give it 4 stars instead of 5.~ Amazon asked me to review this product and to give my honest opinion about it. That’s what I have set out to do, so I hope you found it helpful. ~

"Long Story Short"Well made solid pieceIt will turn your phone into a telescope picture catching deviceEasy to install your device and useI am delighted with quality of it because it is made to last, not like others on the market.Once you buy it it will serve you for years.Lightweight and durable pieceValue for money 10 out of 10

I picked this up to get some decent pictures using a spotting scope when out birding as its very difficult to hold a phone in the right place with a 60x zoom.This is built very well its all metal with a slight rubberised grip around the phone and eyepiece mount. The phone mount rotates around to fix into the frame to reduce its bulk when stored, however it is quite bulky to carry around. It just about fits over my scope but the connection is solid and once i have set the phone in the right location it works perfectly and stays in place, unlike the cheap plastic options.All in all this is more for getting decent shots out of professional equipment and for the price of £20 its great value for money as it will work forever, it is however not something I will carry around just in case because of the size.

I got this so I could attached my phone to the telescope on a clear night and get some starry pictures. I haven't yet tried this but fits my phone well and hooked up nicely.

Just what i have been looking for a sturdy attachment for my phone camera designed for Telescopes or spotting scopes etc to keep the camera rock steady during astrophotography and this gadget from Neewer does exactly that,Easy to fit and really secure but the instructions say attach to tripod leg but in reality you secure it over the Scope lens to align the phone lens with the scope lens makes much more sense i am sure you would agree,Solidly built little gadget and has a good weight to it which indicates quality and Neewer do indeed produce quality products i have a few items of theirs and they are top dog so this item is perfect for the job in hand and i am itching to try it out next clear moonlit night.

C'est peut-être deux fois plus cher que le prix moyen, mais la qualité est au rendez-vous. Solide, bien construit et fait pour durer longtemps, longtemps... Pas sûr que le télescope va lui survivre...

I just received today. I was a little concerned with the reviews mostly coming from free product promotion but decided to give it a try. I used an old iPhone and an iPhone 11 both worked fine. I have it attached to binoculars. It is very sturdy and well-made. Time will tell if the phone holder wears out or gets loose, but I am very happy with my purchase. I paid full price and was not part of any promotion.

Sehr robust, einfach zu bedienen. Ich würde es mir wieder kaufen.

Muy estable, buena estructura y muy sencillo de manejar. Recomendable

Produit bien fini,solide facile d'utilisation