Metal Steering Servo Mount Fixed Bracket & Rear Bumper Trailer Hook Compatible with WPL B1 B14 B16 B24 B36 1/16 RC Car Upgrade Parts

All the parts fit perfect.

This product does not fit the wpl c24 as stated in the product name. The nuts and bolts do not fit in any possible way to assemble, the screws are too short to reach through to grab the servo brackets, the metal blocks do support the chassis frame. The rear bumper only has one screw hole on each side, causing the rear bumper to swing down with no support, unlike the stock plastic that has two per side. The amount of unusable screws supplied and the materials is unfortunately true as other reviews have stated. The worst part aside from not working as described is the amount of unusable materials that are wasted in this kit, from the work that is put into the metal blocks and metals used. Its a complete waste of money on both sides with zero instructions.

For the most part everything was there Except for the servo mounts the screws that it did come with were just 1mm to big for the servo mount so I had to super glue the servo on

The back plate does not fit as stated.. tho I did cut a piece off of it to make it work. Still, should line right up if you say it fits it.

Ok this set up looks pretty till you try and install it on your c14 nothing lines up or fits like it should be prepared to have a grinder and drill press ready cause your gonna need it to get this junk to fit biggest waste of money and time would not recommend this at all if you have a c14.

there are no screws that will allow the servo blocks to attach to the servo plate. they are too short and or too big for the holes.

Works great good fitment no complaints

There are no screws for the servo mounts to be put in and the front blocks for suspension mounts are too wide to fit.