YongchuangUpholstered Headboard Queen White Faux Leather Headboard for Queen/Full Size Bed Adjustable Height Foldable Heaboard

The king size headboard I ordered was exactly as shown in the advertisement on Amazon. It is a nicely, padded linen, headboard, grey - white in color and height up to 56 inches. I especially like the height of the headboard.Assembly is relatively simple and took approximately 1/2 hours. The headboard fits well and attached to the bed frame easily. Apparently, it can be mounted to either the wall or the bed frame. I needed to mount it to the bed frame. Although long screws were included to attach the headboard to the frame (or wall), washers and nuts were not included to secure the headboard to the frame. I had zip ties, so as a temporary fix, I used them to secure the headboard to the frame, until I get some washers and nuts.Overall, this is a quality product. Reasonably priced and looks very nice.

This is going to be a somewhat long review since I'm going to provide information that I wish was available to me when I purchased the headboard. I mean, measurements are important, am I right?!I've included photos from the box it arrived in to the finished product.The box was surprisingly small roughly 32" x 25" and 7 inches thick. I wasn't tossing it over my head but I was able to get it into my apartment by myself, no problem. The headboard comes in 2 parts folded in half on top of one another with the hardware in the middle. each piece is wrapped in a plastic bag. I do wish it was wrapped a bit tighter because I'm always afraid of critters but so far, so good (knock on wood). There was a slight new fabric scent so if you have the opportunity to air it out for a few hours, I recommend doing so. That said, it wasn't fumey or anything unbearable.I ordered a queen headboard and it appears that the headboard may be also be used as a full headboard. That said, the headboard itself is slightly larger than a queen bed at a little under 63" so I'd imagine it would be a bit too large for a full bed. It does, however have adjustments for the legs so it *should* fit securely. The queen headboard measures just under 63" long, 24" high, and is approximately 3" thick. SEE. Was that difficult previous reviewers?! I kid.The two pieces are secured together by a large screw and washers and then again by two metal pieces on the top back and bottom back of the headboard. It's very sturdy. As another reviewer mentioned, one of the brackets came missing a hole but I didn't deem it necessary to drill another one as it was secured in 9 other areas and it was a middle hole.I own a platform bed so I knew that I wasn't going to secure the headboard to the frame itself and instead I set it on the overhang of the bed frame and sandwiched the headboard between the frame mattress and the wall, if that makes sense. See photos. If you are planning to secure it to a bed frame, as intended, the legs will screw in several inches from the edge of the headboard and the height is adjustable, which is very nice since mattress heights vary.Onto the fabric. As others have said, this really does look and feel like a thick linen fabric. It isn't soft or rough, it's just right and the beige/khaki/neutral color is very serene and classic looking. I believe it's as inexpensive as it is because it is open in the back with exposed screws, etc. They don't hit the wall or anything and are perfectly concealed once against the wall but I can only assume that's why it's offered at a discounted price. Aside from that, I really don't see how this differs from what you find in higher end stores. Not so far at least. :)I was a bit uneasy buying a headboard without knowing the dimensions first so I hope this review was helpful to potential buyers. All in all you can't go wrong with this price and quality in my opinion.**If this review was helpful for you, please click the “Helpful” button below.

This headboard definitely serves its purpose and I probably would have loved it more if it was a little longer. I don’t love that gap between the bed and the headboard but it wasn’t a deal breaker. It was actually an amazing prize and arrived quickly. We attached it to the bed frame and it feels very sturdy and looks nice. The color looks a little yellow to me but that was prob just a bad choice on my part. But I plan to cover it in the future so not an issue.

I feel compelled to write a review in appreciation for my experience with this seller and the headboard itself. The headboard is just like it is described and looks good as a low cost headboard solution.The assembly was easy and my college daughter was very happy to have it! It made the room look a lot nicer and more complete. I want to commend the seller as I had shipped the headboard to my daughter and she did a cursory look at the pieces and then let it sit unassembled until just outside the return window (kids!) when she started to assemble, she noticed a tear in one of the panels. I asked the seller if they would be willing to send a replacement panel and they 1. Responded quickly and 2. Sent a replacement right away! I am still so appreciative as I know they could have said, “sorry, you missed the return window” but they did the right thing. For these reasons I would purchase this product and purchase from this seller again.

Delighted with the quality of this easy to assemble headboard. I chose the Oatmeal, and it truly is oatmeal-colored. The sturdy fabric has a well-defined texture, but is soft and well cushioned.Once again, I am flummoxed (as I so often am) by reviews saying it is hard to assemble or pieces missing, or how long it took, etc. All hardware present, individually bagged and labeled (see pic), including the only tool necessary, the Allen wrench. Pictorial instructions were simple to follow, and once unpacked, I had the whole thing done in about 30 minutes.The RTA Golden Rule:HAND-SET all screws in the section on which you are working BEFORE using the provided Allen wrench to tighten (see pic). I also recommend setting outside screws first, and moving in. (The 'lug-nut method' of alternating positions also works.)There are 3 pieces to connect the 2 sides of the headboard. 1 piece is loose, but the other 2 pieces are mounted to each headboard section (see pic). Just unscrew them from the headboard sections and then use all 3 to connect both sides (see pic).I used included bolts to connect the assembled headboard to the bed rails. While they fit my rail slots, they may not fit all.Lastly, I let the assembled headboard lean up against the wall of an unused guest room for 2 days to air away the slight factory/plastic wrap odor.Again, very pleased with this product, shown in my pic at its full height setting. It'll be easy to break down and transport if needed.