Epoxy Resin 64OZ - Crystal Clear Epoxy Resin Kit - No Yellowing No Bubble Art Resina Casting Resins for Art Crafts, Jewelry Making, Wood & Molds(32OZ x 2)

I used this epoxy mix to create a memorial piece in honor of my Poppy, and it couldn’t have worked better. The instructions were clear and easy to follow, even for someone who doesn’t use epoxy often. Mixing was super simple, and I was really impressed with how few air bubbles there were—almost none!It cured beautifully, with a smooth, glass-like finish that made the piece look clean and professional. I was able to add gold flakes and small keepsakes without any issues, and everything set just the way I wanted.This epoxy helped me create something meaningful that I’ll cherish forever. Highly recommend it for both beginners and anyone working on something special

I’ve used several different UV resins for small craft projects like jewelry, keychains, and bookmarks—and this one did not disappoint!Pros:✔️ Fast Curing: With a decent UV lamp, it cures in minutes—no more waiting around for hours like with two-part epoxy!✔️ Crystal Clear Finish: Comes out glassy and smooth, with very little to no bubbles (especially if you warm the bottle a bit beforehand).✔️ Perfect for Small Projects: Works great for thin layers, molds, coating surfaces, and sealing glitter or gold leaf without yellowing right away.Cons:⚠️ Slight Odor: Like most UV resins, it does have a chemical smell when wet—use in a well-ventilated area.⚠️ Sticky Layers if Too Thick: It’s really best for thin pours. If you try to do a thick pour all at once, the bottom may stay tacky. Layer it for best results!

Nice and clear , bought this 5 times easy to use

Works great! I had never tried epoxy before, but I was installing peel-&-stick vinyl tiles into my closets, and wanted something a lot easier to deal with/install than cement, grout, etc. The 50/50 ratio made it extremely easy to measure & prepare. I used a bronze powder to give enough color to the mix to make sure that I could easily see it was covering everything I wanted it to. Mixed it, and it poured easily. Any bubbles from the mixing process settled out as it self- leveled. When it had set and hardened, it had a perfect glossy surface that made it easy to complete my flooring project. Might not be the most common use for this particular product, but it worked well enough for me that after testing it in my first closet, I used this technique to complete all 4 closets that I was working on. The closet spaces were 4'x2', 3'x2', and 26"x30". They had varying amounts of imperfections and slant to each, so I started with a gallon pour, which was enough to fill in minor imperfections & coat the full floor area. The 1 gallon size was enough to cover a 3'x2' floor to about 1/4". The product is not odor-free, but there is relatively low odor, and it is not particularly unpleasant. With the closet doors closed during curing, I could hardly smell it. I can see why epoxy has become such a popular hobby - this was incredibly easy to use, and I could see how much fun it would be to create things using epoxy!

Edit: the not setting up was my bad, I did it wrong. This product is good, just takes longer to set up and cure for most products. I have noticed alcohol ink makes it take much longer where powder colors help it "set up faster". I will buy this product again.Takes a long time to cure, when it cures. Disappointed in this product considering the crafting I do. Plus side: fewer bubbles. "Shrug" wish I had the money back so I could get "Let'sResin" product.My measurements are spot on. I use a scale as well as marked cups and for small batches, syringes, so the cure should be spot on. Another thing is I had 2 projects cure beautifully, but the other 3 did not. Have an axolotle whose head caved in; cured all around the outside, not in middle. Makes no sense.

It's easy to work with since the pumps put out a constant amount. No real need to measure to keep them even. Also found a way to cure it in a couple hours which was interesting. I tried using a small vibration motor to get the bubbles to rise up out of the resin, then when I tried to touch one of the bubbles at the top after an hour it was already fairly solid. The container did get fairly warm so might not work for everything but should come in handy.

Favorite resin hands down, I have tried many brands. It mixes well, and hardens in 24 hours. Bottles are big, lasting quite a while before having to restock. Easy to clean off.Dries faster than other resins, saving you time

I’m very happy with this epoxy. I have a few months experience and the epoxies I’ve purchased have been crap. Easy mixing, take the time to mix completely. Every project I’ve pour with this brand, has been so good. I bought a curing machine and in about 3 hours, time to demold. Highly recommend. And the weight was right on. Thank you