Genuine UPS Replacement Battery APCRBC124 for BX1500M, SMC1000-2UC | Genuine APC replacement battery for Back-UPS Pro model BX1500M & Smart-UPS model SMC1000-2UC. Certified safe. 2-yr warranty

This is a long review. I have re-written it based on what I have discovered. Hope it will help you if you have the problem I had. This battery works fine. 5 stars for the battery, not so much for APC customer service. Read on..... I purchased it to replace the original battery in my BR1500G UPS. This UPS, and its original battery, was placed in service in January, 2014. According to the test data sheet that came with it, the UPS itself was tested on 9/9/2013, so it was manufactured sometime in 2013. I have 6 UPS systems because we used to have a lot of brief power interruptions (not as many now, Florida Power and Light has really improved their system, but we still have one or two brief interruptions every few months). These UPS's are located around the house one in our "rack room" where I have our Synology server, cable modem, router, ethernet switches, phone system, Sonos Connect equipment, one at the main Dish Network DVR , and at our 4 iMac/PC's we have around the house. I routinely replace UPS batteries after 3 years, but somehow missed this one. So after 4+ years the battery failed. Exactly how it failed is as follows: one day everything in the rack room was dead. The UPS was off. I turned it back on, and it came on, but there was an "X" over the battery icon. So I ordered this new battery, and installed it. Very easy, just slides in. But after charging for two days the UPS indicated only a 10 minute run time, which I know from experience is not correct. The load on the UPS is 210 watts. So thinking this battery may be defective, I contacted APC customer service via chat. After two chats they told me that my UPS was 5 years old and had reached the end of its life. I was about to order a new UPS, but dug down and read a lot of these reviews. One person mentioned that after replacing the battery it is necessary to run the self test AND run the Power Chute software to reset the "battery replacement date". I have never fooled with the Power Chute software, but after using it I recommend it. I did this, and now the UPS indicates 27 minutes of run time, which my experience tells me is reasonable for this UPS with a load of 210 watts. Unfortunately there is no documentation that says to do this. It is not in the original documents that come with the UPS, nor is it in the battery replacement document that comes with the battery. As well, APC customer service did not tell me to do this. Below are the transcripts of two chat sessions I had with APC support. While I was frustrated that the first person I chatted with did not seem to understand that I was doing a hot swap replacement, and asked me to do a procedure that was not consistent with a hot swap, the real frustration only came later when I came to understand it is necessary to update the battery replacement date in the Power Chute software. Devi (4/25/2018, 5:19:52 PM): Hello Eric, thank you for contacting APC by Schneider Electric, my name is Devi. How may I help you? Me (4/25/2018, 5:24:19 PM): I purchased a new APCRBC124 for my BR1500G because my ups said the battery was bad (an "X" on the battery icon). Hot swapped it because it is being used to protect some servers. After replacement, still have the X. Bought from Amazon (Ships from and sold by Amazon) but it had Australian warranty information!. Do I need to do anything to reset the UPS to get rid of the X on the battery icon? Can't find any instructions on how to do that? I do not want to cause a power failure to my equipment, so need to be careful. Devi (4/25/2018, 5:24:38 PM): I understand your concern. I apologize for the inconvenience caused. I will surely assist you with it. Devi (4/25/2018, 5:24:44 PM): Did you charge the unit for continuous 16 hours before installing ? Me (4/25/2018, 5:25:01 PM): how would you suggest I do that? Devi (4/25/2018, 5:25:41 PM): This issue might have caused due to less charge in the battery. During shipment unit will not be charged completely due to safety issues so, I would request you to charge the battery for 16 hours by keeping the unit off. Devi (4/25/2018, 5:25:51 PM): Once the battery gets charged fully. I would suggest you to perform a self test. Me (4/25/2018, 5:26:15 PM): it is a hot swap, how can i do what you are asking? Devi (4/25/2018, 5:26:47 PM): Yes, it is hot swappable. Devi (4/25/2018, 5:27:00 PM): During shipment unit will not be charged completely due to safety issues. Devi (4/25/2018, 5:27:21 PM): Some batteries need to charge completely first. Me (4/25/2018, 5:28:16 PM): i do not think you understand me. I hot swapped the battery on an in-service ups. how can i charge the battery before i put the ups in service? it is already in service!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! if i have to take it out of service, what is the point of being able to hot swap a battery replacement? Devi (4/25/2018, 5:29:03 PM): Eric, yes, I understand your concern, install the battery then only charge it for 16 hours, before connecting to equipment. Devi (4/25/2018, 5:29:17 PM): In order to check the battery integrity, I would request you to perform a self test. Me (4/25/2018, 5:31:37 PM): Do you understand that this is an in-service UPS? That I am trying to do a hot-swap to replace the battery? That doing what you are suggesting will defeat the entire idea of being able to do a hot-swap? If so what good is the entire hot swap capability? Devi (4/25/2018, 5:32:02 PM): I understand that ups is in service. You can charge it according to your convinience. Devi (4/25/2018, 5:32:08 PM): it resolves the issue. Devi (4/25/2018, 5:32:17 PM): If you cannot perform at all its okay. Me (4/25/2018, 5:34:22 PM): OK, I will let the battery charge, but I cannot charge it "before connecting to equipment" and I cannot charge it "16 hours keeping the unit off". Devi (4/25/2018, 5:34:29 PM): Also, please try performing the self test The Procedure is : Press the power ON/OFF button until you hear the second beep. The AC plug symbol (ON LINE) flashes off and on during self-test mode. Devi (4/25/2018, 5:34:37 PM): Please make a note that the connected equipment will go off if battery is bad. Me (4/25/2018, 5:35:51 PM): OK, will try this. Tomorrow, after the battery has had time to charge! Will performing the self test remove the "X" that is over the battery icon? Devi (4/25/2018, 5:35:54 PM): Yes. Me (4/25/2018, 5:36:51 PM): Can you comment as to why I received a battery with Australian paperwork? Is Amazon selling these correctly? Devi (4/25/2018, 5:37:11 PM): Eric, I am not sure about that Devi (4/25/2018, 5:37:25 PM): I have to check with the concerned team regarding this. Me (4/25/2018, 5:38:55 PM): Will APC warranty this battery, and if so, how long, and when will the time begin for the warranty. I received it last Wednesday. Devi (4/25/2018, 5:39:06 PM): Yes, as per the serial # and date of purchase proof. Devi (4/25/2018, 5:39:12 PM): You have 1 year of warranty. Me (4/25/2018, 5:40:06 PM): OK. Well, that is about it. I will run self test tomorrow. If I have a problem I will get back then. Thanks, good by. Devi (4/25/2018, 5:40:12 PM): Sure you can get back to me. Devi (4/25/2018, 5:40:22 PM): You are welcome. Devi (4/25/2018, 5:40:27 PM): Have a great day! My comment on the above chat session: The problem with the above chat is not the advice that was given, but the obvious fact that Devi did not seem to understand that I was doing a hot swap, and could not charge the UPS before I connected the equipment to it. If Devi had said that in my case it would be best to just wait a day, letting the battery charge, with the loads connected, I think it would have made more sense. But the battery will charge just the same if the UPS has a load connected, or not, because this is what happens after a power outage: power fails, UPS discharges battery, power comes back on, UPS charges battery while under load. So after charging for two days, I did run the self test, and the "X" over the battery icon went away. So at least that information from Devi was correct! However, after running the self test the UPS shows that it only has a 10 minute run time, and this is with only a 210 watt (24%) load. I have other UPSes with more load than 210 watts that show much greater run time. According to APC (see second chat session below), my UPS is at the end of its life. I purchased the UPS in January 2014, so I got more than 4 years on the original battery, not bad. But, there is nothing wrong with this UPS. As stated above, I just needed to reset the battery replacement date in the Power Chute software which will recalibrate the UPS for the new battery. Here is my second chat for those who might be interested: Monica (4/27/2018, 10:52:15 AM): Hello Eric, thank you for contacting APC by Schneider Electric, my name is Monica. How may I help you? Me (4/27/2018, 11:00:29 AM): I purchased a new battery for my BR1500G UPS. It was purchased from Amazon (Sold by and ships from Amazon). For some reason it came with Australian warranty information. I installed it in my UPS on Wednesday. It has charged in the UPS for two days. The load on the UPS is 210 watts, 24%. The UPS shows the battery run time is only 10 minutes. The battery icon shows full charge. I have run the self test. I have another UPS, a BR1000G that I purchased last November. It's load is 240 watts, 40%, and it shows that it has a 19 minute run time. I believe the new battery I purchased, an APCRBC124, is not working correctly. Monica (4/27/2018, 11:01:54 AM): What is the load connected to the unit? Monica (4/27/2018, 11:04:55 AM): Are we connected? Me (4/27/2018, 11:07:41 AM): sorry, was away from computer for a few minutes Me (4/27/2018, 11:08:02 AM): the load connected is a server Monica (4/27/2018, 11:08:44 AM): please can I have the serial number of ups as on the white bar coded label at the rear/bottom of the unit? Monica (4/27/2018, 11:08:58 AM): of the battery also Me (4/27/2018, 11:09:19 AM): yes, that will take me a few minutes to get....please stand by Monica (4/27/2018, 11:09:41 AM): sure Me (4/27/2018, 11:13:25 AM): UPS serial 381337X00901 battery serial number is 7A1808L14856 Monica (4/27/2018, 11:21:03 AM): Thank you Monica (4/27/2018, 11:21:20 AM): I think the problem is with the unit and not battery Monica (4/27/2018, 11:21:31 AM): The life of unit is 5-6 years Monica (4/27/2018, 11:21:48 AM): your unit is quite old so the battery cannot be used efficiently Me (4/27/2018, 11:21:56 AM): it is new 4 years ago Monica (4/27/2018, 11:22:09 AM): 381337X00901 is 2013 year of manufacture Monica (4/27/2018, 11:22:21 AM): when was this unit purchased? Me (4/27/2018, 11:25:56 AM): purchased from amazon January of 2014, but test paper that came with it shows it was tested on 9/9/2013 Monica (4/27/2018, 11:27:19 AM): okay Monica (4/27/2018, 11:27:26 AM): The unit is out of warrabty Monica (4/27/2018, 11:27:34 AM): You will have to replace the unit Monica (4/27/2018, 11:27:56 AM): You can put the new batteries in any other identical unit to test if they are good Monica (4/27/2018, 11:28:11 AM): in case the battery is faulty then I can replace it for you Me (4/27/2018, 11:30:59 AM): ok. I will test the battery in another unit. Me (4/27/2018, 11:32:14 AM): why did battery come with Australian warranty info. Is amazon selling these properly? Monica (4/27/2018, 11:33:04 AM): That is not a problem, 7A1808L14856 is serial number Monica (4/27/2018, 11:33:11 AM): that will have 1 year warranty Me (4/27/2018, 11:33:26 AM): ok,thanks Monica (4/27/2018, 11:33:33 AM): welcome Monica (4/27/2018, 11:33:38 AM): Have a nice day:) Me (4/27/2018, 11:33:52 AM): ok, take care, bye Clearly, there was no mention of recalibrating the battery by telling the UPS the battery had been replaced (using the Power Chute software).

This battery made the repair of my UPS easy, the APC unit quickly sensed the new battery and there was no muss or fuss after the simple installation process. Good thing too, because one week later the power went out, but the battery had plenty of time on it giving me a huge cushion to save and exit everything I was doing. The time you get will depend on the load, but even with two monitors, there was power to spare -- no loss of function or productivity. I cannot comment on the long term quality of the replacement, but this is well constructed and fit exactly as intended. Whether or not this is a good value depends on you -- for me it is a good value, but depending on what I was doing, I can see where it might not be for some, but honestly -- with the scarcity of certain components recently having a UPS in top shape makes a lot of sense to me. 5/5

Manufacture year is not the current year suggesting this might be in the inventory for a while. However upon checking this is the genuine product for battery replacement. The performance is as expected as well. My original battery could sustain ~40min of my use before it was degraded. Now this replacement holds similar 40 mins of use after full charge which makes me very satisfied. The compliance stamps do as UL and FCC also assured me I don’t need to worry about the safety.

Drop in Replacement for my APC BX1500G UPS. Was able to swap in the battery in less than 5 minutes, without having to do any disassembly or wiring. At the same exact time I purchased this battery for my APC UPS, I also purchased a set of batteries for my Cyber Power UPS. I expected the battery replacement to be just as easy as my APC UPS, as I only sell APC Battery Backups to my clients, so thats all I was used to, but because when I needed a new UPS in my house the APC's were sold out at the time, so I bought a nice Cyber Power one, thinking that it would probably be fine, and it turns out it was just fine that Cyber Power UPS actually performed its job just as well as all my APC's did. But after about 4 years in service the battery did finally die, so I looked into it and purchased Comaptible batteries for my CyberPower UPS, which was actually 2 batteries wired together in series. But, I thought for sure it would be just a drop in replacement like the APC, where you just pull out the old battery and then slide in the new one, maybe plug in the battery, and you are done. But NOPE, on the CyberPower you actually have to first pull out the old battery, then carefully peel off the tape that connects the 2 batteries together, because the new battery doesn't come with tape you have to be extra careful when peeling off the tape so that you can reuse it, but that isn't the only headache, you then have to carefully document what wires went where, disconnect those wires off the old battery, then carefully wire the new batteries the same exact way, then you have to carefully put the tape back on it, then carefully slide it in without the weight of the batteries pulling the batteries apart, and then once you do finally got it back in and wired properly, only then can you seal up the side and put it back in use. So all I am trying to say is, I now have a new appreciation for how much easier a battery replacement is on an APC Product, since they literally just slide right in, they only go in one way, and they connect as they slide in, so you don't even have to deal with any wires. For that reason I am going to stick with APC going forward, and I can confirm that this replacement battery will work perfectly, at least in the BX1500G.

Worked great, but only lasted a year and a half, buying it again because there are no other options that seem to fit the APC BR1500G

Old battery finally gave out so ordered this replacement. Genuine APC part so no guessing if it would work — popped right in without any issues. UPS came back to life exactly as expected. Straightforward swap, no tools, no headaches. Good to know the equipment is protected again. Worth getting the real thing instead of a generic.

Was about to just buy a new UPS but then decided to see how hard it was to replace. Glad I did! It was so simple and technology has changed in the past 3 years so replacing battery was so easy and saved me $115. High quality OEM replacement

This brought my 10 year old UPS back to life as I had hoped (error messages from the unit were not clear whether it was just a dead battery or whether the unit was defective). Genuine APC batteries are expensive compared to generic replacements but without concerns about the quality of an unknown brand.

Covid: undoubtedly reworked many home offices for "these challenging times". As a professor, I needed to rethink my home office, as all my lectures have moved online. "Get a UPS," the online teaching community recommended, "so you can keep teaching during a blackout." Didn't I already have one? Yes, I did! Many years ago, I purchased the APC XS1300 for my home theatre, which has since been retired - so long ago, that I can't remember when I bought it. I rigged the unit up, and felt secure that yes - I now had a UPS with my computer, sound system, monitors, and mixing board plugged into it. Then, I had an actual power failure during an online meeting. The lights went out around me. The unit chirped up - the fan spun, responding immediately to the interruption. Then, one minute later, the UPS shut down. The "dead battery" icon flashed on the LCD screen. And why should the battery last longer than a minute? How old is this thing? Definitely more than 5 years, perhaps closer to 10. So off I went to Amazon, to find a new UPS. YIKES! What happened to prices since I bought this thing? Understandably, they rose significantly. The XS1300 I learned has an easily replaceable battery - one that simply slides out, and snaps back in. You can even replace the battery with the power on. So rather than spending over $200 for a similar UPS, I researched the next best option: replacing the battery. I figured even if I managed to get to 10 minutes of backup power, it would be a ten-fold improvement from the 1 minute I had with the original battery. Although the 7 Ah battery was recommended for the XS1300, I spotted the 9 Ah version: the APCRBC124 by Schneider Electric. I reviewed the comments, and saw that people reported it fit into the XS1300. So why wouldn't I opt for a higher capacity battery? The APCRBC124 arrived at the happy speed of Prime shipping, and snapped perfectly into the XS1300. It had a QC slip taped to it, reporting that it had been tested recently this year, 3 months prior. It was reassuring that the battery hadn't been sitting in a warehouse for years. After an overnight charge, the LCD still estimated "1 min" remaining of backup time. So I decided to do a test. With all devices plugged in, my power consumption rated between 60-85W, which was ~10% of the load that the unit said it could supply. I set Amazon Music Prime on loud, so that I could hear when the music stopped. A solid 1 hour and 16 minutes later, the UPS turned off and beeped, reporting that the battery was drained. This morning, after an overnight charge, the unit is recalibrated to the new battery (more or less). It's telling me that I have 13 minutes remaining instead of 1, which is more than the 1 minute it reported before - but I know the truth. I have over an hour of backup power, which means I could finish the lecture and even entertain some questions. Mission accomplished! Bottom line: if you have the XS1300, or a UPS that fits this series, I recommend this exact battery.

Werkt, zit er in en laad op. Onduidelijk hoe lang de garantie is omdat volgens APC Schneider alleen van hun verkoper in NL waar je niet kunt bestellen omdat t een website is die niwt werkt, het een garantie geeft vanuit APC van 2 jaar gegarandeerd etc. Staat niets bij deze verkoper via Amazon.

As advertised original replacement. Is working well.

Ürünün APC nin orijinal ürünü olduğunu bilmek yeter, fiyat elbette yüksek ama orijinal için uygundur.

My APC 1500 GI UPS stopped working and the PowerChute software app was showing a replace battery symbol. (I can't complain as the original battery lasted 7 years). I ordered this battery as a replacement and it came next day. It was so easy to swap, just switched off, unplugged the unit and laid it on it's side, removed the battery cover, pulled the old battery out (using the pull tabs on it) and pushed this replacement battery into the slot. I then slid the battery cover back on, stood it upright, plugged it in and switched on. Using the PowerChute software I selected the self test menu and clicked the update battery replacement date button, which changed the battery replacement date to today's date. I then clicked on the self test button to run a self test, which told me it passed. The unit is now back in full operation and running on this new battery. I am really pleased at how quick and easy the whole process was, with no tools required!