Peachtree Woodworking Supply Phenolic Zero Clearance Insert compatible with Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8" x 3-3/4" x 1/2" Throat Plate Opening

Nice replacement… no flex, micro adjustment screws, fits like a glove… Make sure you order the right one and you’ll be more than satisfied.

Fits like a glove! Takes about a minute to fine tune the adjustment screws and remove all play and another couple to fine tune the level with the table top. Phenolic inserts are the only way to go on any table saw, I even have them on my portable. They’re smooth, perfectly flat, strong, stable, and long lasting. Unlike cheaper MDF or even polymer. Zero clearance not only makes cleaner cuts but also makes the saw safer by not allowing small pieces to fall into the blade opening. I bought 3, 1 for straight 90 cuts only, 1 for beveling, and 1 for my dado blade setup. Highly recommended this product.

Fit me into saw very well. Not to long, short, wide narrow, thin or thick. I liked the fact I can adjust the insert in the x, y, and z planes for a perfect fit. Also the relief cut on the bottom allowed me to make the plunge cut with the standard 10" blade I rip with. On thing they need to fix is the alen wrench they send for the z adjustments. It's too small. It measures a tad under 3mm. A 1/8 wrench is what it took. I will buy again.

I have delta contractor saw. This insert fit the opening perfectly. It has adjustment screws in the side and the end to eliminate any slopy in those directions. It also has four screws to level the flat surface of the insert with the table saw surface. When I started to cut the opening in the insert and the insert was level with the table saw top my saw blade was touching the insert and would not rotate because it got stuck in the insert material. What I did was use the four leveling screws to raise the insert so the saw blade could spin freely. That made it easy to raise the blade and cut the slot in the insert for the blade.

Bought this to replace the Craftsman table saw insert (p/n 27509.00), table saw (p/n 152.221240). Dimensions were 13 3/8" x 3 3/4". The replacement color was white vs the red pictured, but the description did say the colors may vary. The only thing that I would note is that in the original insert there was a screw to hold the plate down/in place. In this replacement, the leveling allen screws are in about the same location as the (retaining) screw was, so you cannot simply drill an extra hole to add that retainer screw. I may try to fashion something, but the piece weighs enough that I don't think it is necessary. The leveling screws worked very well. It was quickly shipped - I was able to install it in less than 30 minutes. Overall, I was VERY pleased to find this replacement and impressed with the fit & quality. I'm considering to purchase a second and cut it wide enough for dado blade.

Fitted my 32 year old Grizzly saw. Had to modified it to fit the splitter.

Works as advertised easy to install easy to remove a nice clean cut

I have a 37 year old Grizzly. I had to modify all the contact points: front, back, and the retaining nub. I realize they probably design this oversize so that you can make it fit the widest variety of saws. But the three stars is because they could make better design choices for the contact points so that people can more quickly modify those contact points to make it fit.

Didn’t fit my DWE-7492 perfectly — the insert is slightly shorter than the opening, and the leveling screws don’t align with the support spots on the table. Also, there’s no locking or hold-down mechanism to keep it in place, which I must’ve missed when choosing. I ended up modifying it a bit, and now it works great. Overall, it’s a solid, well-made product — just not quite an “out-of-the-box” fit.

Inserto de muy buena calidad, me quedó a la perfección en mi sierra de mesa DELTA 36-670.

Perfect fit, easy to adjust and holds up very well! Older delta industrial 10” table saw

Very good quality insert plate at a reasonable price

Excelente justo lo que necesito