BLACK+DECKER 4V MAX* Cordless Screwdriver with LED Light (BDCSFL20C)

No idea why I haven't bought one of these earlier. Spent years manually screwing furniture together for no reason. Out of the box it lasted 45min, maybe an hour. Takes awhile to charge - I plugged it in around 6pm and was still charging like 3-3.5 hours later. I bought a set of bits to go with it and really recommend it. The light is really nice, changes position easily.The only downside so far is that the bits pop out pretty easily. Could be user error but it got a little frustrating after a while. It was only certain size screws though so could be I chose the wrong size bit.Overall, love it, really recommend it. I rent, I don't really need or want a drill so this is perfect.

I love this screwdriver! It holds a charge for ages, being able to bend it to a “gun” shape makes it really easy to access screws, so ergonomic. The light is helpful too. It’s powerful and versatile, I’ve even used it as a drill. Easy to change the bits and the accessory pack that’s available with it covers almost any type of screw head. I have more than one: in the kitchen utility drawer, the garage and my toolbox. My handyman used it and was so impressed with it that he bought one.

I needed a power winder that worked well for the mandolin . Not all do , so I tried one of these to go with the Dunlop Sys.65 power head bit (sold here) and this is a great setup for string changing on a mandolin . Tuners are smaller and closer together on the mandolin and this rig works perfectly . recommended.

Not as strong as I though is more for light use.

Jeez, own it for years. Still working fine. Sufficient torque for its size.

I owned a Black & Decker electric screw driver but it stopped holding a full charge and was too weak (it was old and worn out)So i decided to buy this NEW electric screw driver and i love it, it's close to perfect.I thought my package was stolen, instead of waiting i ordered a 2nd replacement electric screw driver.Next day, my package (that i thought was stolen) arrived.....So this is why i ended up with 2 of these screw drivers which worked out for me because....CHECK OUT THE PHOTO I UPLOADED...The screw driver has a white little switch on it:The middle is POWER OFFLEFT is counter clockwiseRIGHT is clockwise.As i was building this wall cabinet, i switched the screw driver LEFT for counter clockwise rotation (to loosen screws). And when i tried to activate the screw driver, it worked but as soon as i tried to do anything with the screw driver bit, the rotation would stop.After i inspected the screw driver i realized the issue was this white switch. The switch kept getting stuck and not fully going into the LEFT position. If it's not fully in the left position it won't work well. It may spin but it won't have enough power to fully spin. I tested this by activating the screw driver so it would spin, as soon as i touched the screw driver bit with my finger it would stop spinning.THE SOLUTION:PUSH the white switch HARD into the left position so it's fully in that position (You should not have to do this)So i returned the defective screw driver and i kept the one that was good.AND SO FAR, i haven't had any problems with the other screw driver. I've used it many times. Very satisfied with it.____________________OTHER SMALL ISSUES:The LED flash light adds some bulk to the screw driver so when screwing screws at the tight corners of the wall cabinet, it did became a tiny bit tricky (but not impossible) to use.Black & Decker makes attachments for this screw driver for really tight corners. That might have helped i don't know.____________________PROS:- It's VERY powerful NOT as powerful as a drill but it's the next best thing for all sorts of tasks. It made building the cabinet much faster and saved my forearm / wrist from doing too much work. (No soreness after)So if you're older, have issues with your forearms and wrist. I think this product will be very helpful for you.- LED Flash light, i love it. It's pretty bright and useful. Comes in handy.- Battery, it last a very long time i don't know for how long but it's never run out on me yet.- It comes with 2 different drill bits, flathead and Philips-head screw (One sided bits)____________________CONS:- Double sided drill bit heads, they don't really fit in this screw driver. I mean, i was able to fit one from my previous electric black & decker screw driver. It fit, it slightly worked but it was a bit loose. (No pun intended)To make things worse, there's nothing on the screw driver that will allow you to hold the other screw driver bit.So i did what other people did, i took a rubber band put it around the screw driver and i slipped the other screw driver bit under it to hold it.Owners of this screw driver should not have to do that. Make the electric screw driver shaft longer to fit a double sided drill bit and it'll be even better and if you don't do that at least design the screw driver plastic to have a open notch to hold another drill bit.- Screw driver activation button, i think it could be positioned a little better. I think it should have been made to be a thumb button in that area under the white switch.____________________IN CONCLUSION:This product is really good. The only thing you need to fear is the white switch. That seems to be the most likely place this device will fail. Keep an eye out for that.AND NO, you can't drill holes into your wall with this screw driver, it's not THAT strong.Besides that, i recommend this product i think it's really good and worth the purchase.

We have been looking for one like this since our old one died. So happy we got this. Husband loves it.

Does the job.