ICON Multi Rate RXT Leaf Spring Pack w/Add In Leaf, Compatible with 2005-Up Toyotaa Tacoma, 158505

I went straight to option 3. I didn’t want to play around with the different heights and end up there anyway. These springs are beefy and I really don’t see too much of a difference with my bed loaded at 200lbs vs 600lbs.The problem I have at option 3, my front coilover pre load is maxed out. I have some pretty noticeable rake. Know your setup before you go straight to option 3. I went this route because I carry ALOT of weight when going on a fishing outing. Springs ride real good though. No vibes at low or high speeds

I replaced my stock leaf springs on my 2021 Tacoma TRD Pro with two of these RXT’s from Icon. They were packaged well enough (could have been better, but it didn’t get damaged), and came with all the hardware to assemble the RXT’s for the Option 3 setup; however, it doesn’t don’t come with new u-bolts, nuts and washers—I ordered the associated kit from Icon and it all worked flawlessly. I mounted them with the 1” spacer, and have my bed loaded with about 600lbs and have the 1.2” rake mostly due to the spacer block. If your wanting to have more weight in the back than 600lbs, I’d recommend a higher weight capacity leaf spring. For me this works great though.

We ordered two of these from Icon. Unfortunately, when they shipped the first two, only one empty box showed up. I called Icon and they were very nice about it and immediately shipped two more replacements out. Well out of the next two, we only got one! I called Icon again and they customer service folks were very nice about it and they shipped out yet another one. Well surprisingly, not surprisingly, it never showed up. I called Icon again and they sent out another one. Long story short, they sent us 7 of these just so we could receive two. They claim the problem was Fed Ex, but I disagree. It is their packaging. They do not package these well enough for shipping and they come out of the box and get lost. While we like the product, the experience of getting it was a total nightmare and took 6 weeks.

My stock springs were mush. These ended up raising me about 3.75" before settling. I put my camper trailer on the back to check what kind of sag that would cause. 1.25" drop with 300lbs on the hitch. Very happy with the ride quality. Would recommend.Edit-You will likely need some shims to keep your drivetrain from vibrating. https://www.amazon.com/dp/B097FG4M3S?psc=1&ref=ppx_yo2ov_dt_b_product_details

Note to buyer. This is individual leaf packI bought two individually, 1 came with hardware and the other did not come with hardware.The one without hardware also came damaged.Instructions were not providedAfter installing leaf packs, truck rides really good. Hoping they can send me the missing hardware so my truck can actually be complete. Leaf packs makes noise with proper bracket and shim.Bolts for the leaf packs came damaged as well since it seemed like it was dragged on the groundThis product is a odd shape so it would take a large box to fit in, i understand that. Product got delivered bare. A box with foam and instructions/ hardware would make this perfect

I added the extra leaf into this pack, it’s eliminated the Carolina squat I had going on when pulling the camper. It’s rides SOOO much better. Paired with Bilstein 5160’s in the rear and 6112’s in the front on the 3rd clip setting. These were a much needed addition

This is an excellent option if you tinker like I do. Just installed at option one and it looks great! If I add weight or just want to add some height, I have the additional leaf in the garage ready.Rides like stock, maybe a touch softer, but I honestly can’t tell.

Item arrived with no packaging, only the shipping label with a lot of tape.One installed, the leaf pack squeaks a lot!!!