17200 Trailer Sway Control Kit for Weight Distribution Hitches

Had a fairly bad swaying problem with a light weight enclosed trailer in the wind. This Curt sway bar pretty much took care of my swaying problem. Easy to install also.

This CURT 17200 Trailer Anti-Sway Bar Control Kit works well. This is a simple yet effective sway control device. It is essentially a brake pad clamped to a flat bar. The tightness of the clamp can be adjusted by turning the adjustment screw. I have tried several adjustments and can definitely hear it groaning when making slow turns. I guess that means it's working. Installation could be better. Self tapping screws (these are not self drilling) are easily stripped and not what I would consider reliable. I prefer to drill through the frame and use grade 8 bolts, although I haven't done that yet and the included mounting screws have been okay so far (500 +- miles). The little ball joints and presto pins that mount it seem fairly cheesy but have worked sufficiently. It mounts and dismounts easily. This is used on my 26" travel trailer that weighs about 6000 pounds. Tow vehicle is 2011 Chevy Avalanche, so its a pretty soft ride compared with a pickup truck. I towed it a couple times with no sway control and it was indeed quite "wandering". 70 mph on the interstate was fairly tiring and at times stressful. This sway control is a noticeable improvement. Now I can keep up with traffic without as many "oh-crap" moments. I also installed a Curt 8000lb. weight distribution hitch and that works great to level out the vehicle. Highly recommended for Chevy Avalanche and Suburban / Tahoe with coil spring rear suspension. These vehicles ride nice but really sag when trailering anything heavy.

Excellent value to replace parts I damaged or broke on the original kit I purchased. Fit exactly as before and easy to replace what I broke. Looks to be good quality and will last as long or longer than original parts. Functions as designed and reduced rear camper sway exceptionally

Used for my TT to stop sway when traveling on highways. Stopped Semi trucks from blowing trailer side to side when passing. Truck and trailer track perfectly as one unit and no sway on trailer. I use thru bolts and locking nuts to install the mount on the TT tung. I had to make a custom mount and weld it to my hitch receiver as there was no way I could weld the supplied bar onto my receiver. Not a fault of the Curt company just my receivers design. Trailer tows 300% better then before.

This made a huge difference while pulling my trailer

This kit is very nice and works well. Be aware that the ball must be welded to your existing receiver. I tried to find one online with a built in plate, but none of them met my riser requirements for a level pull. It only cost me $25 from a local fabrication shop to get it done.

Works as it should

Top of the line

Amazing product. Really helped with the sway on my trailer

Only regret should of got it sooner? Very easy to fit and the towing my American caravan is just great 👍🏻

Must have if your RV or Trailar sway, I have purchased 2 for my RV and it’s a saver, my RV is not swaying up to 100km. I use it in every trip I go to keep safe. I recommend for every RV and Trailer to use at least 1 to ensure safety. Better to have on long RV or Trailers 2

Quality unit, fast delivery and good price.

Used these for years now. Work exactly as expected.