Respawn 110 Pro Ergonomic Gaming Chair with Footrest and Recline

I was looking for replacement office chairs, preferably high back. Prices were all over the map, and so were the reviews. I spotted these--not office chairs, but definitely usable--on sale, so I jumped and got two. As it turns out, the wife doesn't like her new chair and opted to keep using her squeaky old one.Amazon said it was going to be 4-5 days and the chairs would arrive separately. A couple updates later and the chairs were arriving early. And, they did, one shipment at my gate 2 days early so the shipping thing was grand.After lugging the cartons onto my porch and contemplating lint for a few minutes, I decided it was time, so I opened the first carton (which was damaged) and went for it. Took my time, didn't get carried away organizing stuff, and half an hour later the first chair was built with the second one unboxed. Assembling the second chair went like clockwork. About 45 minutes from starting I had both chairs ready to game.The cartons, though damaged, had protected the contents just fine. There were no visible defects in any of the parts. All the screws in the hardware packs had thread locking compound on them, the parts were organized along with two hex wrenches, and one set of spare hardware (one of each type) was included.The pedestals assembled quickly and solidly: attach spokes to hubs, insert casters, drop lifts into hubs, drop covers over lifts. Next seat brackets were bolted to seats, seat backs were lowered into place & bolted, arm rests were bolted on, pillow secures with elastic, and done.I left hardware a little loose until I was sure the parts were aligned, then I tightened the screws fully. Do this to all the screws including the armrests. The assemblies will be 'tight' at first but they will break in! Better a little stiff when new than screws falling out a couple months later!I am about 5'10" and 170 lbs and so far the chairs are just peachy. The backrest is slightly taller than me when I'm seated; lumbar support is in roughly the right spot. I don't use the auxiliary pillow unless fully reclined. The reclining mechanism on one chair slips a tiny bit but then locks solidly. The pedestals have a little flex in them but not enough for concern. The armrests feel reasonably solid but I don't put my full weight on them. Same goes for the footrest, which feels a little springy, and reaches to my ankles when fully extended. The padding is adequate for me on all parts and I have slept in the chair.My only critique so far is the armrest pads should be a couple inches longer at the backrest end, and the seat should be at least one inch longer. Overall, it's a nice chair for the price, fingers crossed that it will be reasonably durable.Side note: apparently my legs shrank while writing this. The footrest reaches to about 76 mm or 3" above my ankles, oops.

Wow, I am very impressed with the quality of this chair, and I'm very picky so that says a lot. The leather material is very soft and actually FEELS like real leather. I've owned more expensive chairs that felt fake. It even has a fresh almost new car smell which I appreciate. The head and lumbar pillows serve their purpose well. The foot rest is very supportive for your legs and the rubbery wheels roll smoothly on my carpet without the need of a car mat. My only complaint so far is it does feel rather hot while sitting in it for awhile, however this isn't anything wrong with the chair; it's just not perforated leather so fair warning it's going to be hot. Also, if I am to nitpick for a second, I can't rock in it. The lean is either locked in place or free movement and it's very free movement so when I lean back the recoil isn't very conducive to rocking. It's definitely a set where you like it and lock it kind of situation, but I can live with that. The chair is very comfortable and I'm glad I went with Respawn. It shipped in two days prime, I actually got it a day earlier than expected, and assembly was very straightforward. I literally just built it and have been sitting in it for awhile so these are just my first impressions.3 months update: The chair is still holding up. I use the leg rest a lot more than I initially thought I would and it's still working well. The foam on the end of the arm rests have been permanently sunk in, all the way down to the plastic and I can feel the sharp point of the screw if I put too much weight on my elbows. That's a bit disappointing but not enough to take away any stars. I still really enjoy this chair. I bought a seat cushion because I felt it wasn't cushy enough but mostly because I didn't want what happened to the arm rest to happen to the seat.

First of all I only looked at this one because I wanted to get one of those DXracer ones all the cool kids on Twitch have, to see what all the hype was about and I could not find one for sale anywhere. Secondly all the other "gamer" chairs and other "gamer" stuff in general look like trash, way too busy with "gamer" colors and bizarre designs in general. For this model I went for the black and gray one, naturally.Wow. after sitting on a $35 walmart thing for years (and the $200 "executive" chair my boss bought for the office that is nowhere near as nice or comfortable as this), what they say is true: the things youre gonna spend the most time using, shoes, beds, and chairs, dont cheap out (and keyboards too. I'm never buying non-mechanical ever again). And I sit and type alot so thats important. I'm most shocked at how stable this thing is, even when fully reclined. I recently cracked some ribs and so when i started putting it all the way back I got really scared, because I've never had a chair that did that before and being that this is the "budget" option I had no idea if this thing was gonna tip over and pop my still healing ribs. It is incredibly stable, and I'm a reasonably big guy (for you) (sorry its a Dark Night Rises joke that I cant ever help but make) at 6'2" and 210lbs. Even trying like an idiot to tip it over back and forth and side to side. I'd feel comfortable reclining it back and having a nap. The material seems and feels nice enough, its got metal internal construction, there are actual bearings, like real ball bearings in the armrests at the mount points.Time of course will tell how the material and of course the padding is going to hold up. But the underlying metal frame construction was impressive. One little complaint I have is that the armrest wiggles just a hair bit. But hey, theres ball bearings holding it on and its gotta have a little play in it to move when you recline. I do worry about the material of the elastic straps that holds the pillows on, because it seems to me that in, probably a years or so time, is going to fray. Especially the optional (both are optional of course, and after getting them adjusted for you *just right*, I'd never take them off) lumbar one what constantly gets gets forced around by your body, this would have to be my guess of the first point of failure, but not really that big of a deal. Everybody's got a sewing kit and can pop down to walmart or order it here to pick up some more elastic fabric for like $3 and spend 20 minutes just popping a new one on. I will say that the included Allen wrenches for assembly are garbage. I tried to use them for something else and after putting like 10 or so foot pounds on it the head just rounded right off. But they were otherwise just going to get used once then thrown away or tossed in your "garbage tool" bag for doing stuff you dont want to use your good tools for, so whatever.Easy to assemble, solid construction, insanely stable, very comfortable and of course excellent value. What more is there to say?

Have had my eye on this computer / gaming chair for a while now. I absolutely love the black and purple design and it looks just as good in person. This came well packaged in a 40 lb box. Instructions were very big with pictures and clear directions with parts labeled. Put it together easily by myself in about 15 to 20 mins. Didn’t run into any issues with the assembly which was nice. This is an initial impression review but so far I love how comfortable the chair is (first day using it today). I will be completely honest and say that I would not buy this chair at full price that it is normally listed for, but I caught it for Amazon prime day significantly reduced and for the price I snagged it at I am 100% satisfied with this chair and for this same sale price would buy it again.

I'm giving this chair three because I can't give a three and a half. So far I have two complaints. First, the chair came damaged. Nothing visible that would immediately cause me to pack it back up prior to assembly, but something that would only be noticed once it was fully assembled. The gas piston is busted. Gus this is something you would only notice after not only have you fully assembled. The chair tightened every bolt, but you sit on it for the first time. After that. Debacle, I reached out to respawn for some type of solution and they referred me back to Amazon since it was in the first 30 days. Days. When I reached out to Amazon they were quite gracious but I had to buy a new third party gas piston for which Amazon reimbursed me via essentially store credit. Disassembly of the chair to replace the gas piston mains that I now have to break the friction seals with a hammer and a pipe wrench, no hyperbole. Best experience for a brand new chair. The second issue is that, and it could be related to the fact that it's not sitting in an optimal height for me because of the gas piston, but the seat is a little hard. Particularly after several hours of working in my home office, buttocks rear legs are almost numb. I'm also having to do more neck exercises as I'm looking up at my computer screens from a less than optimal position. I am withholding any further judgment until I have the time and have assembled all the tools. I need to fix a product that came to me broken so that I can enjoy and properly evaluate it. The rest of the chair is quite comfortable and I am enjoying having a foot rest. So all in all asking me at this very moment. We're looking at a three and a half Stars.

Update 5/31/20, 3 days in.I bought this chair 3 days ago, and set it up in about 30 minutes by myself. It normally costs around 170 but it dropped to 148 so I bought it. I'm 5'7, and the neck rest is a tiny bit short for me but I can rest my head on it. The foot rest isn't really useful and it's a little flimsy. The chair feels mediocre quality and shouldn't break if you use it correctly. The chair height adjustment is fine and the lumbar support is great. The armrests are a little wobbly, as stated in the other reviews. The leaning mechanism is a little unstable but It leans really far back. The box came in a little beat up but nothing inside is fine. You can't use this chair for long without a shirt because it can get a little moist on the lumbar. It's not really as comfortable as I expected but that's the same with all gaming chairs. They're mainly for show. If you want something comfortable, use an ergonomic office chair. One last thing about this chair is that the right arm rest is about an inch lower than the left. This is a tiny detail but it really bugs me. Also, if you learn back with the lean mechanism locked, the chair still leans back a little and creaks. I'll post an update in a few months.

The chair assembly was easy until I got to the part when I bolt the steel support at the base of the back of the chair into the steel support of the seat. There are three holes drilled into the steel support for three 8x20mm bolts that are included which require an included Allen wrench to tighten. The included bolts fit into the holes fine from the back portion of the chair to the steel support on the seat of the chair but there was nothing they screwed into such as a nut so they just immediately fall out and the chair falls apart and could not be assembled as received. I checked the instructions and it literally has an illustration of these bolts just going into these holes with nothing to screw them into to tighten the back support to the seat frame. They just sit there. The accessories are nicely packaged and clearly labeled so I knew I wasn’t missing any pieces, plus again the instructions clearly state I was doing it right which is insane to me, how can anyone put this chair together? I had to purchase three 5/16th (didn’t have 8x20mm/metric size at Home Depot so couldn’t use factory bolts) bolts/nuts and a matching ratcheting combination wrench to use with a torque wrench to install them at extra cost. This is why I’m giving just two stars. I had to settle for silver bolts because I couldn’t find black ones to match the color of the steel frame.After assembling the chair itself looks pretty nice. It’s a pleather material, feels fairly mid to high quality. Chair neck support fits me perfect at 5’11”. It just about fully reclines and feels comfortable and doesn’t look too cheap. I’m happy with it the look and feel. I’d give it 4 stars but I just can’t believe I had to purchase nuts and bolts to install it. It appears based on the instructions and illustrations that all of the chairs are like this, maybe I bought a manufacturer defect? I took a photo of what I’m talking about. The nuts/bolts in the photo are the ones I had to purchase and were not included, hence silver color. Again, I meticulously checked the instructions and box for extra parts and it was obvious there were none! Considering the extra 20$ I spent I may have been able to find a slightly better chair but probably not so it may not be a total deterrent if you don’t mind the extra work. Chair is sturdy, comfy, doesn’t look too cheap.

It’s better than I expected. It’s sturdy and has good cushion. Wheels roll good. It’s a big upgrade from my last chair. I was worried by pics I saw in the reviews it looked cheesy in some photos but it’s more appealing in person. Was honestly going crazy trying to find the right chair on Amazon. This chair doesn’t disappoint.

Not original Respawn 110 chair but It's Good chair so far.

Loved the chair, great back support and material is also very nice. Took 15 minutes to assemble. Seller is also very responsive and helpful for any support. Delivery came before the stipulated date. Packaging is also very good.

مريح

Muy buen producto, es mucho mas grande de lo que esperaba y además muy cómodo no me tomó mas de 1 hora armarla, la calidad del material se ve buena y resistente. Como ya lo dice en el manual, cuando inclines la silla completamente no hagas mucho peso hacia atras ni te dejes caer con fuerza por que es muy probable que te caigas.RecomendadoUso después de 4 meses: tiene un detalle de que los tornillos que fijan los reposabrazos se aflojan y tienes que volver a apretarlos cada cierto tiempo. Hasta el momento no tuve ningún otro problema

easy to assemble but i recieved the wrong color ordered it in grey and came in black