ESR for MagSafe Car Mount, Magnetic Phone Holder for Car Air Vent, Car Phone Holder Mount for iPhone 17e/17/16/16e/15/14/13/12/Samsung, All Smartphones(2 Metal Rings Included),Charging Not Supported

I originally bought one ESR MagSafe Car Mount just to “try it out.” Big mistake. Because it worked too well. Next thing I know, I’m back ordering five more like I’m stocking up for the apocalypse—but make it hands-free. The magnet is STRONG strong. Like, hit-a-pothole-while-grabbing-coffee strong. My phone doesn’t wobble, slide, or attempt a dramatic escape during sharp turns. It stays put, behaving better than most passengers. It clips easily onto the air vent, looks clean (no clunky plastic eyesore), and holds every phone we’ve thrown at it. iPhones? Yes. Samsung? Yes. Random phone with a metal ring? Also yes. Simple, reliable, zero nonsense. No charging built in—and honestly? Fine. I came here for phone stability, not a science project. This mount knows its lane and stays in it. Final verdict: If you’re debating buying one, just save yourself the second Amazon trip and buy multiples now. Apparently that’s what you’re going to do anyway. Highly recommend.

There are four common method of securing a phone in a car: (1) Window suction mount, (2) Air vent clip bracket, (3) Adhesive mount, (4) Weighted dash non-slip mount base. I ended up choosing to use the air vent clip method because it worked better for our situation. POTENTIAL PROBLEMS — I was concerned about this category of mount design because I read various product reviews that mention the vent fins eventually breaking, bending, or being damaged. I notice that vent fins vary in thickness and strength depending on the vehicle. So, I took a bit more time researching available products and decided on this one because it seemed sturdy and the adjustable solid retainer piece seemed well designed. BETTER DESIGN — Something important about this vent mount design is that it has two solid supporting feet to keep the bracket stable, putting less strain on the vent fins. The retainer clip that goes in and holds to the back of the vent fin is easy to extend and tighten. BEST INSTALL — Based on concerns about vent fin damage, I've decided to gently position this mount so the stabilizer feet are in place, and the metal hook retainer gently holds to the back of a vent fin, but I do not tighten the bracket to the max. This is important during use, and also when removing the phone. Rather than pulling hard on the phone trying to separate it from the bracket, which could pull the vent fin assembly out of the dashboard, instead, I use two hands to have one and holding the base and the other pulling on the phone. The weight of the phone helps hold the mount secure. I'm not off-roading or driving over potholes, so I'm not worried about the phone shaking and the bracket falling out. MAGNETS — It's hard to know what the experience of others will be, but the phone I use with the mount is an iPhone 14 Pro Max, so it is a bit heavy. I use a case with an embedded strong magnetic MagSafe ring in the case. I also use a MagSafe magnetic ring holder that allows for pass-through functionality of the MagSafe magnet connection function. As a result, from my experience, my phone holds very securely to this mount. MAGNETIC PHONE HOLDER RING — My magnetic phone holder ring has a stowaway 360-degree adjustable holder ring/loop, so I'm able to easily attach and remove my phone from the holder. I do notice that my phone holder ring tends to stick more securely to the mount than to my phone, so when I remove the phone, the ring stays on the mount. Sometimes that's preferred, other times, if I want to bring the phone holder ring with me, I'll remove it and put it on the phone. CONCLUSION — Due to variations in automotive fan vent fin assemblies, and variation in phones, cases, and accessories, it's possible there's not one perfect mount for everyone's situation. Yet, this unit does seem stable and versatile.

My household loves the ESR products. The ESR for MagSafe Car Mount is no different. The screen and camera protectors are inexpensive and perfect - so is the car mount! Light, but with stong magnet and a good quality air vent securing system. Very durable and extremely stable phone hold!

It's a great mount. The plastic tightening ring in the back snapped on mine after about a year (looked like it broke on the manufacturing seam). I still liked this mount the best so I bought 2 more. As a precaution I cut a thin strip of duct tape (a zip tie might work too) and wrapped it around the tightening ring to help give it some more resilience.

I recently bought a new phone and got a case with a magsafe style ring on it. I've gotten lots of accessories for it now and really enjoy the flexibility of all the magnetic attachments. I bought this ESR mount for our family van to replace an old magnet holder that wasn't compatible with MagSafe. This ESR is so much better as a replacement. It also came with some rings if your phone doesn't have the magsafe rings already, which was great for my wife's phone. So why is this so great? First, it's very adjustable. We've placed it on the dash just above the vents in our Odyssey. My wife likes to have all the air blowing on her when she drives, I do not. With the ESR mount. She will place it in a higher position above the vent and keep the vent blowing on her. When I'm driving, I swivel it down and use the vent to keep my phone cool while using GPS. It's a surprising benefit that both her and I enjoy quite a bit over the last ball mount we were using. Second, the magnet is very strong. With the old mount we would accidentally knock our phones off every once in awhile. Not so with the ESR. It takes a little getting used to, it's so strong, but you need to kind of slide your phone off the mount to release the magnets instead of just pulling straight off. Once you get used to it, it's fine, and you have confidence that your phone is going to stay there very secure. The magnets are so strong they'll even hold through a silicone attachment ring holder I have. Finally, we live in the US South, and it gets quite warm here, especially in our black van. Some adhesives just don't hold well. I expected to have issues with this one as well, but following the instructions and letting it sit for a day before using it, even with how hard you have to pull to get the phone off the magnets, it shows no signs of coming off the dash. I'm very pleased. If you have magsafe phone or case, this is a great mount and I definitely recommend it.

Best option I found to use in a Cadillac Escalade 2016 and up works well and stays in place. definitely would recommend. Now they just need to make a cryoboost wireless version.

This thing is amazing! I have the weirdest, most narrow air vents so I never thought this would work but it's adjustable and sturdy. The magnet is strong and holds my phone perfectly. 10/10 recommend!!!

I'm sure it's a fine product but I never got the chance to try it. While taking the pieces out of the box, one of the magnetic rings was loose and latched just perfectly onto the mount. Can't get it off because it's so thin and my fingernails and tools can't get between the tiny magnet ring and the magnet itself, so can't use it, and because the other magnet ring now has to be picked up through the first one it makes the connection weak enough to not be useful. Such a bummer! Was really hoping this would be the solution for me. UPDATE: The company reached out to me and provided a replacement. After a few weeks of use, I can confirm that it works great! I'm really impressed by how sturdy it manages to be, while still having enough give to make getting my phone off a breeze. It really hits that perfect middle-ground of ease of use and function. After a decade of using crappy plastic snap-on or slide-in brackets of all shapes and sizes, I'll never go back! This is a total game changer. Updating my review to 5 stars wholeheartedly.