Z1 Plus ATX Mid-Tower PC Case - Tempered Glass Side Panel - 3 x 120mm Fans Pre-Installed - 5.25" ODD Support - USB 3.0 - Desktop Computer Chassis

The first case arrived dented, but looked very good in quality, it was a shipping mishap. When I requested a replacement, the seller went out his way to make sure I was satisfied--great support for the product. The new case arrived and looked perfect, the form/fit/function of this case is one of the best I've worked with. Excellent cable troughs, good power supply compartment layout, everything fit like a glove. Plenty of room for cable routing in the case with convenient places to zip-tie them out of the way, and look nice through the window. I replaced the rear fan with a blue LED fan and the case interior lights up nicely. The system is quiet and efficient thanks to this case and it's fans. At this price, I couldn't ask for more. I am very pleased and would recommend it to a friend.

A good solid case. Easy access to both sides, good flexible wire loom from the power supply makes for a clean install. RGB ready to accept the modules, has several 2.5 inch & 3.5-inch drive bays and an Optical drive bay as well. Fluid bearing fans that you cannot hear running at all, sided with a tempered glass side, showing all the internals. Very light weight but very well manufactured in a modular type of format. I would definitely buy again.

Like: easy access to all compartments of case. fans are easily moveable. Had to move 1 which faced my CPU Cooler fan, but in the opposite air directions. screws are very tiny, recommend a magnetic screw driver to keep from dropping them on the board. Had one screw hole over a PCIe card slot that was too loose for the recommended screw, and too small for the next size up. I am currently working this out. I selected this tower to use the ODD option, but found that the power supply I purchased did not have a power cord long enough to wrap around the tower's compartment inlets. Bought an extender for ~$8. Problem solved. I like the glass panel. It shows off the LED components.

Solid case with plenty of mounting spots for drives and good internal room for airflow. Able to route cables throughout the case and keep them out of sight. The biggest reason for selecting this case was it still had an option for a 5.25 inch optical drive. The only real drawback was it was not a toolless case.

Well designed case. It has room for motherbuards with SATA connections that extend horizontally. This was built for an office application so I would have preferred 2 metal sides but Gamers will like the transparent side. It is one of the few cases including a DVD slot. There is plenty of room for wire management. It is a full sized case so make sure you have room for it. I usually use mid-tower cases but most don't offer DVD slots. The Zalman T6 is a nice mid-tower case but does not offer room for horizontal SATA connections.

When you have lots of Optical archive data, and NEED a DVD drive Slot in a case, you will need a case like this for a personal build. I looked at what seemed like HUNDREDS of cases and found lots with ODD bay slots, either one or 5 or something in between, hardly any had style, functionality and ease of maintenance like the Zalman Z1, I would have gone for an Antec Flux 502DP if I could have found one new for sale, it has a hidden ODD bay and swing out door. For the $69.99 price this lists for, you get 3 non-RGB fans, a high airflow case with that sexy glass side window and all the cables strategically hidden behind the motherboard and in the PSU basement. I liked this case so much I bought one for a good friends build to check the quality and was so impressed I bought another one for myself. I highly recommend this case if you want to show off the build, NEED an ODD bay for a Blu-Ray/DVD burner/Player and you don't want to spend over $80 bucks shipped to your door. It is very well built. thicker gauge steel than competitors like "Cougar" for instance. You have room for at least 2 HDD and 3 2.5 SSD drives as well. Plenty to love about this case in my opinion.

What you would expect from an economic build. Not the most friendly build, but I went in knowing it was a budget case. The mounting hardware stripped, with very little tension. Not all mounting hardware is equal, and I learned a lesson that day. And since MOBO's no longer provide the mounting hardware, you will need to buy it separately. Don't rely on what comes with it, it was not ASUS board friendly. I bought this case, because it has a DVD rom drive option, and I needed it. So many new cases don't offer that. Fans came with it, which worked for me. It was compact enough and fit a full ATX MOBO, with a monster CPU fan. The DVD Rom drive space was not as clean fitting as I would have liked, but after that and the stand off screw incident, it went together relatively easy from there. This worked, but will look else where next time. It arrived undamaged, so that is a plus! 3 star rating is average for me- Good, but not great rating.

Pretty good case , needed one with a CD Drive, always a plus. (PS3/Wii Emulation). Came with 4 Fans (i think), i removed them and added 6 RGB , has a dust filter , and extra screws. This has more than enough room even for my Death Note Rem figure. THE GLASS IS THE MYSTIC! BEAUTIFUL. Be sure to search if there are replacements on this Tempered Glass just in case.

perfect seize 5.25 bay perfect

i love the item i bought will be getting more from amazon

The product is very good. It has a solid structure. It is of very good quality. The glass on the side has added a different atmosphere. There is enough space for 5 ssd/hdd and odds inside it. The cable channels are very useful.