KXKZREN Boat Flooring EVA Foam Decking Sheet Faux Teak Marine Mat Marine Carpet Cooler Tops Non-Slip Self-Adhesive Flooring for Motorboat RV Yacht Kayak Swim Platform 94" x 47"/44"/35"/23"/16"ClimatePartner certified

Initial impression is that I am really happy with this product. As you might expect, it's a bargain compared to a professional installation. Admittedly, the custom jobs are going to be nicer but in my case it wasn't worth paying 6x the price for something I wanted to try anyway. The color and texture has been very consistent over several purchases so there have been no issues matching sections. Ignore the water spots in the first two pictures. The foam cuts easily either with a utility knife or a pair of scissors. Application is easy and the adhesive is very sticky. Once applied is is very comfortable to walk on and makes a big difference in the comfort of your deck, particularly if you are barefoot.Some suggestions for applying: Let the sheet age and relax for a few days prior to using preferably in the sun where it can get hot. The foam will shrink a very small amount so you want that shrink out before you cut and apply. Also, a roller is a must. It was obvious that even after pressing and walking on it, rolling the foam still found areas that did not have good adhesion. Last thing to mention is more of a personal preference. I would suggest making templates and cutting sections as opposed to trying to cut this in place. It's a little more work but you will be happier with the final result. You can find examples on-line.

The material is so easy to work with and cut effortlessly! The boat looks great!

I just literally finished installing this in my van … adhesive allows for minor adjustments if you’re quick enough. I didn’t use any other adhesive— I figure I can always add adhesive if it comes up in spots … not sure how well this will hold up to my pets (my cat easily clawed holes into it while it was on the living room floor getting unfurled. Easy to cut and trim with utility knife or scissors. Looks a lot richer than the cost!

Overall great product. I absolutely love the appearance of it on my boat. The installation was easy, but make sure you double check measurements and be careful while cutting pieces. Take your time to make it look at its best.The adhesive is actually stronger than I thought it would be, which is good given the nature of being outside on a boat, enduring all the elements.

I used poster board and tape to make a stencil of the boat floor. Then used that to cut it out from the foam. Not 100% perfect. But 95%. No one will notice the imperfections but me. Still need to use an xacto knife to clean up some edges. It sticks well. You can’t un-stick it to fix an error. So be careful! Will report back as it ages over this summer.

We bought this to do a balcony. The description made it appear good for swimming pool areas, so I assumed that implied water resistant, all weather, etc. I don’t have an opinion yet on how it winters (it snows here…) But I will tell you right now, do not waste your money.First is the lack of consistency! The stripes do not line up, the machine that cut the rolls didn’t cut them identically from one roll to the next. I ordered 10 rolls, and only 3 had the same spacing from the end of one to the start of the next piece. So that causes the whole project to be a little wrong. The next thing is the lengths are also not identical. I’m very aware that this sort of material will stretch, especially on a hot install day, so we were very careful to store the pieces not in use yet in the shade, too lessen the heat and stretchy characteristics. I’m not new to installing flooring, this stuff was not very well cut at the factory. It looks nice once down, but if you are expecting it to look seamless in the symmetry, you’re going to not be happy.The last thing was the wax paper backing Was terrible!!! No matter how carefully the 2 of us worked together (and this is a 2 person job if installing more than probably 4 sq ft pieces) the stupid paper would tear like cheap old masking tape off the roll. Yeah, you know what I’m talking about. Very annoying!!!This material wasn’t cheap, so I’m not leaving terribly glowing responses to it. If you were doing small areas ( nothing more than a sheet at a time) it would probably be great. But trying to do large areas has turned into more work than it should have, for results that I’m not happy with.UPDATE AFTER A FEW WEEKSI did not submit my reply until I could watch the stuff for another month. I absolutely wish I had never spent over $1000 on a bunch of it now. I’m gonna have to literally peel it up and take it to the dump. It is coming off of the surface which was clean and smooth, it’s buckling, it shrinks in the sunlight, the stuff is the worst. If you are going to use just one piece of it and it doesn’t matter if it does those things then it would be wonderful. But if you need this to actually look good and be affective, do not waste your money