Magnetic Car Phone Mount for iPhone and Android with 6 Magnets and Adjustable Arch Design, Black

This car mount works so well, I’m impressed. Honestly, there were a few things I was worried about when I ordered it. Turns out when I received the car mount and took a look I had nothing to worry about. First I’d like to mention is I don’t have to worry about my phone heating up because it’s not a phone mount where you install it on the vent so I love that for my phone’s health! Next, I’d like to say the magnet is so strong! When I get into my car I have to connect my charger to my phone. I normally would have to use both hands, but the magnet is so strong that I could push it in with one hand! The car mount stays in place and so does my phone. Last thing I’d like to mention is when I ordered the product, I ordered a MagSafe phone case with it. I ended up not needing it because the product is NOT MagSafe compatible. Instead, this product comes with 3 different magnets that you can stick on your phone case. So, this works with any phone. The only thing I could warn anyone about is that when you install both the car mount (itself into your dashboard) and the magnet (onto your phone case), it’s there for good. There’s no going back. Of course you could take it off somehow. Like I said, the product is STRONG; it sticks well. (1) It would be hard to take off and (2) I’m sure when you get it off, you can’t reinstall it. So, if you’re okay with that, this product is perfect for you! Just make sure to get it in the right place haha

I can totally proof you that this is the best on the market. I bought this 5 years ago, and it is still on like the first day. It is 100% sturdy. My phone doesn’t move at all when I am driving, and it doesn’t fall at any time, those magnets are really strong! (and it comes with a lot of them, I have tried them all because I have switched phones and phone cases and all of them have worked perfectly and never came off from any of my phone cases). Would definitely buy it again if I switch my car. IT’S SO WORTHY!

Unfortunately, I have to carry two cell phones. I have been using a vent mount clip from this same company for my iPhone Pro Max. My work phone is also an iPhone but the standard size. Wanting to keep both phones within reach and no good way to use another vent clip model I was looking at options. I did not want a suction cup for the glass because they don’t stay put. I didn’t want a suction cup with that gluey gel stuff, because while they stay put much better they all leave a residue that cannot ever be completely removed. (I’ve tried tons of things) I found this item and having another one of their products I love, I wanted to give it a shot. Having a dashboard with really no flat areas this seemed to be a great option, and it is. The foot design allows for the feet to conform to the dash and seats firmly to the surface. With the arch design you can move the holding surface to the point you want it and the ball design allows you to adjust the angle to suit any dash and any phone. With one of the 3 metal plates affixed to the phone case the plate lined up to the holding surface the magnet grab with much more force than I was expecting. It very securely holds the phone in place. You can turn the surface portrait or landscape and whether plugged in or not the phone stays put. Please note that just as stated in the product details this will not work with MagSafe magnets and if you put the metal plate on a MagSafe phone you will block the charging surface. I will also mention that the weight of the Pro Max phones probably would do best with the largest metal plate. More surface area would be better. I did test that using an old case and it worked well. It stayed in place well but the weight might cause some movement on a very bumpy road. The adhesive on the plate is really strong. The adhesive on the feet is also very strong. The description says it will not leave residue when it’s removed. I won’t know for sure till I need to remove it, but I assume it to be true since everything else in the description is accurate. I am pleased with this product and would recommend it.

Works as advertised. Pretty much stays in place and high quality. Wish the magnet was a wee bit stronger but it still holds!

This is so far the best phone mount I have bought. Great magnet and the mount is great.

WEAK! Will not hold iphone 17 ProMax. Purchased a couple months ago and just went to install it and holding it in place on my dash it will not hold my iphone up. I have a magsafe case and it attaches STRONG to Every other holder I have. This is my 1 LISEN holder and I will never buy another one!!! I'm not even installing this on my car, but rather throwing it right in the trash!

Works exactly as described, doesn't obstruct visibility of the road. It's very easy to use and it holds the phone very well.

Update: Had to deduct starts. Adhesive didn't last long in July summer here in Phoenix. After having this 1 month, it just came undone. That's too bad, I liked this solution but 110 + degree weather doesn't do well with this. This mount works perfectly for holding my android auto tablet. You can't tell it's there unlike the big sanction cup mounts with long arms. Install was super simple. Stick base on, wait 24 hours. Stick magent on back of item and wait for a while and it was good to go. The only downside was that on bumps my tablet would fall to the mounts lowest divet on its track. So it's possible it's just my tablet is too heavy. The magnet works very well and the adhesive is on real good after 24 hours. I highly recommend this!

A see comments saying the tape doesn’t stick properly. If you clean the surface properly with metho before sticking it down and leave it for 12hrs before use the bond is solid. You must clean the surface properly! If you do it right the bond is rock solid.

C'est la deuxième fois que je l'achète et je pense même l'acheter une troisième fois ! L'aimant est très solide ! Il n'a jamais perdu en magnétisme depuis plus de 2-3 ans. Mon téléphone se colle et ne tombe jamais. Le support tourne et descend à ta guise pour mieux positionner ton téléphone là où tu veux. Jamais été déçu de ce produit. La qualité est très bonne.

Sturdy and exactly what i was looking for. Having to buy and return a couple of other car holder's, I have to say this is perhaps the best car holder i have purchased over the years. FYI - I used a Magbok case and it was good enough to hold on to the mobile. Didn't need to use the steel plate provided along with the case. Excellent stuff.

The ball joint is a common size, so I was able to install a different, non-magnetic holder to the base. The base design is remarkably good; it can fit almost anywhere. High-quality, sturdy construction.

Very strong magnet and comes with 3 magnets of different shapes and sizes. Grips very well so long as you wipe down the surface with the supplied alcohol wipe beforehand and let dry before adhering the phone holder. Accommodates to virtually any position you need, unlike traditional phone holders. As such, it doesn't need to obstruct windscreen/view! Highly recommend! Best car phone holder I've ever purchased, and I've bought many types over the years ranging from those that adhere to your windscreen and have a long arm, to vent clips, cigarette lighter types and single sticker adhesion to dashboard. This far exceeds any other product on the market in my opinion because of the two "feet" that can be placed on any flat or uneven/curved surface. See my photos to see the uneven surface where I have positioned mine - had no issues even though we get really hot weather in Australia 40°C+