Coxreels 112-3-100 Hand Crank Hose Reel - Heavy-Duty Steel Frame for Stability - Adjustable Tension Brake for Controlled Operation- Fits 3/8 x 100 ft Hose - 12 x 18.25 x 13 inches

I purchased this reel to go with my wall mounted Active 2.0 power washer found herehttps://www.amazon.com/dp/B0BK25S1FW?ref=ppx_yo2ov_dt_b_fed_asin_titleThe reel is very sturdy and well built. Highly recommend. It has a tension brake to keep the hose right where it is. Very nice brass fittings. This reel will definitely last the test of time. When I received it, on the back is a square bracket with like 5.7" space in between for mounting.For mounting on the wall if you have drywall say in your garage and you dont want to cut the wall and put in a center brace. You will need a bracket that spans across the 16" studs to allow you to mount the bracket. I found mine at clean garage. Once mounted up. I couldn't be happier. Looks great.I paired mine with the shelf herehttps://www.amazon.com/dp/B0D9GQPNN9?ref=ppx_yo2ov_dt_b_fed_asin_title

Definitely expensive but build quality is top notch I am really enjoying this hose reel.I did have to buy a internal connection piece to connect my pressure washer hose up on the inside but it was available at home depot (see picture of inside of reel)Also I had to be mounted on a peice of wood as it is less the 16 inches wide so you can not mount directly to studs

Purchased for DIY custom wall mounted Active 2.0 pressure washer and reel combo. Selected the Cox over some of the lower priced options due to overall build quality, and a bit more compact against the wall for my space.Reel is very heavy duty, did notice one chip in the powder coating inside the reel, but not with returning for exchange, Will hit with some touch up paint to prevent rusting.Note will need to purchase whip hose to connect to pressure washer separately. I used a quick connect plug to connect the hose to the reel, since my hose already had male quick connects attached and did not have a swivel end.

Purchased on 10/2024. Use it for my home car wash system. I probably wash my cars 2x a month. After 6 months the plastic break broke. Most of it is well made surprised that it has weak plastic parts that broke after 12 uses.Contacted Cox Reel and to repair it they want me to buy pop rivet tool and metal drill bit, watch multiple videos. The other option they gave me was ship the reel back to them and they would fix it. Problem with that option is they will not pay for the box and packing.I would go with something else

The machining is perfect and all parts matted to minimal tolerances. It's feels study and something that'll last forever. The threads on mine is free from powder coating or rust marks.Did I forget to mention? It's made in USA! Absolutely love USA made products--especially heavy duty machining.Update 10/17/2020:I finally managed to install everything and this guy proved to be a bit of difficulty. Yes, everything feels solid, no doubt. The issue lies in the threading. The hose to the inner barrel doesn't just screw on easily; even for a 3/8th screw. You need to force-thread the hose in.The outer swivel thread doesn't screw in perfectly to the jumper line OR a simple bolt. Again, you have to force it in like you're going to strip it. After all the forcing, it is officially leak-free.That is a comet static 1700 extra with an Amazon jumper line, homemade Continental rubber hose cut to length, kobrajet 3/8 75' hose. Don't ask how I kept everything leak-free because that took a whole 2hr job of Teflon tape and further torqing to make it happen. There's no quick disconnect on the gun because it doesn't make any sense to free it and have to connect it up again.

The quality and build on this is definitely good. All connections with my Comet 1700 pressure washer, jumper hose and 3/8" 50ft' hose worked right out of the box without any leaks. The only thing I hate about this reel is the wobble when reeling; it moves about 1/4" back and forth. Expected better for this price range. But a friend of mine has the same issue on his coxreel as well, and seems others have mentioned this in their reviews. Not worth uninstalling and returning though. Bought this because ObsessedGarage claims its the best on the market. Had to mount this on a piece of 2x4 wood (which itself is mounted to my wall studs); the 4 mounting holes on this reel aren't exactly easy to screw in since the barrel itself gets in the way a bit.

I use this at my at home pressure washer setup. Coiling the 100 ft hose was a pain and the when uncoiling the hose for use it always got twisted. Having the hose reel perfectly coils the hose after use and then dispense the hose with no twisting/coiling issues. This work great especially with my pressure washer wand with a swivel connection. No more twisting or bunching.

I'm not sure what all these negative reviews are all about. This reel has worked flawlessly since day one. Threads in the barrel had zero powder coating in them. Hasn't leaked one drop of water and windup is butter smooth. Used daily in my mobile detailing business. I use the mtm 2' whip line and the mtm 100' hose with it. One thing, I have the 150' reel and my 100' mtm hose fits perfectly. No way it would fit 150' of hose. Nonetheless, this is a solid and well made piece of equipment and worth every penny.