400x300mm DIY PC Case Dust Mesh Filter, 2Pack PVC Dustproof Mesh Filter Cover with Magnetic Strip for Computer PC Case

This is the stuff here, excellent thickness, plenty of material to fully filter an entire larger size gaming tower. It comes packaged in a large plastic sandwiched between two pieces of cardboard that keep it from getting beat up, folded, or otherwise damaged. No mesh will ever fully dust proof your computer, this will only increase the amount of time between routine cleanings that are necessary to keep your system running at peak performance. The holes are on this are such that they should be able to keep out pet hair, your hair, and larger material. I don't notice any restriction in air volume and temps seem relatively stable in very close to pre mesh temps, I'm seeing a .5 to 1 degree c increase which is negligible. This stuff is easy to work with, cut, and attach the magnets. Magnetic hold is pretty decent as well. After reading reviews on several others like this I noticed a common thing in that generally it's shipped in a roll which gets damaged in shipping. This was one of the few that is shipped correctly and the price is lower than others that are shipped rolled. Save yourself a few bucks and the aggravation of receiving damaged mesh and go with this one.

Works great, both the adhesive and magnetism are efficient in strength. I placed a magnet wrong and after two days I was able to peel it off and reapply it to a new spot with no sticky residue left behind and plenty of adhession to keep using the same magnet. Only using scissors, I managed to make some pretty clean cuts so it's pretty easy to use.

Perfect. Broke glass, now it's dust screen heat releasing class. Cheap. Cuts easy. Use a new utility blade.

I am pretty pleased with this mesh. I wanted to go for a pre-sized on for my Meshify case, but couldn't find one with the right measurements. This requires cutting to size, but I should be able to get 4 perfectly sized screens out of this one pack. I also like that the magnets are wider than the originals, so you don't get the same shearingfrom pressure when cat sits on top. My biggest gripe is that the magnet adhesive isn't very good. I placed and then pressed between boards for a few hours and the bond didn't last but a few weeks. Over all I think it's a great replacement.

I flip PCs and this is a must if you buy used cases. I have used this to replace a top dust filter in a Phanteks Eclipse P350X Computer Case. First, I got the rough measurements of 6 in x 12 in. Secondly, I cut it out with scissors. Then, used the scissors to cut round corners. Next, cut the magnets to fit around the filter, leaving around half an inch from the edges of the filter. Then, using the strong double sided adhesive I stuck it. Finally, I plopped it where the missing filter was and it really brought the whisk build together. It felt and looked flawless. Air travels through it nicely, preforming well. Will fit any spot you need. Great value for me flipping because people like a PC that looks nice and complete. You can also just easily remove it to clean the holes.

Was skeptical when ordering. The product was actually top notch, the magnetic strips were authentic 3m strips, which is very rare. They work very well. The mesh itself was delivered flat and properly packaged, most sellers are selling these in rolls which is silly. Quality of the mesh itself exceeded my expectations, excellent quality, mint condition with no imperfections. The mesh was super easy to cut, you can use scissors or a utility knife. I will order a few of these for extra just because it is so good and reasonably priced.

A lot more high quality than I thought. Very versatile, used as custom shaped meshes for the back of my pc. The magnets are nice but I wish there were some thinner ones so that I didn’t need to cut to fit them.

Easy to trim to the shape/size needed. In using this to replace a PC case front glass panel that had too much air restriction even after modifying it. Now it breathes much better with lower temps on the CPU and GPU. Yeah I leave the door open when in use. It also has a PC fan added to the rear if the desk to help move air.

So, bought a case that was almost perfect... But you guessed it, it was missing any form of dust filtering from it's main front intake, ridiculous oversight if you ask me. But fun case otherwise, so went with this kit. Even slapping bits and pieces together (case was slightly longer than the max length of the mesh pieces) was p1ss easy. I even managed to cut it to size with a regular pair of scissors. Supplied magnetic bits are more than adequate to safely stick it to the front of any ferro metal front. Just know it has to adhere directly to metal, any form of plastic in between will be enough for these magnets to loose adhesion. So, good stuff, easy to clean as well. Tip: have a good look at which side is the smoothest and make sure that that points outwards, easier with cleaning the filter

Used for putting filters on a PC case. The material is flexible, not brittle and easy to handle. The mesh is not very tight, but still sufficient to prevent dust accumulation inside the PC. The adhesive magbetic strips are also good and easy to install.

Material de boa qualidade e de facil manuseio, recomendo!

NZXT H510i kasam için aldım, kendim ön panel boyutunda kestim. Çevresine de manyetik bant yapıştırdım orijinal gibi oldu. Cam yerine bunu takmış oldum böylece kasa hava alabildi sonunda.

Inga problem med denna, gör sitt jobb