PWACCS Pressure Washer Hose, 50 FT x 1/4", 3600 PSI, M22 Fittings

3/8" hose is fantastic. I need to distinguish between the 1/4" and 3/8" because I've owned both. I got 50 foot of the 1/4" ~4 years ago, and it was a solid product. This year when I started the pressure washer .... hole in the line. I can't blame it on the hose, because it's possible it got damaged in storage.... however, the 1/4" hose was somewhat prone to kinking (or at least trying to) which likely contributed. Still, 4 years with our usage is a good run, and it's possible the seller has upgraded the 1/4" hose to something more durable since then. However: the 3/8" hose is an entirely different world. I went with the 3/8" because I ordered 2 50 foot hoses, and wanted to get the additional water flow to offset the additional resistance. A 3/8" ID hose has 225% the cross section of a 1/4" ID hose. That part of it has worked out great. It seems like we get more pressure at the gun with the 120 foot (20+50+50) than with the prior 70 foot (20+50) config. The last 20 feet is the 1/4" hose that came with the pressure washer, and that is on the 'gun' end. What I did not realize is how much better this hose was going to be. It really is thick and commercial hose durable. Because of the additional cross section, it really is pretty kink proof. (Nothing is fully kink proof except perhaps the metal jacketed hoses which mechanically can only bend so far.) The only downside is that these hoses are *much* heavier. I have to lay them out so my wife doesn't have to drag them to much to get a ~200 foot span to work in. Also, of course, dragging more weight is harder on the hoses (especially in a case like mine where the last segment is the so-so hose provided by the manufacturer.) Highly recommended if you have the need and the weight isn't an issue.

Good quality hose worked well. Fit my pressure washer with no issues. I also like that it comes with adapters and a coupler.

I hooked it up works great so far have had any issues! I look forward to seeing how long it lasts! It is very flexible. It is lightweight it connects easily. It seems very durable, but we'll see overtime! I will upload a video later on when I'm using it, I didn't think about it when I got it and used it

Good replacement. Paired with quick release fittings. Much better than original equipment. No change in pressure going from 15 ft to this length on 2500 psi gas power washer. Does still kink From time to time.

Ran this hose at full pressure washer output and it never kinked or restricted flow, even coiled around tight corners. The included adapters made it a universal fit for the machine I already had. Solid replacement hose.

If you find that the hose that comes with your pressure washer is rather short, necessitating frequent positioning of the whole setup, you'll find this hose is a good purchase. It even comes with a few adaptors that lets you connect to your original hose as well. It gave me 75' - enough to cover my whole property. It is well made, but all hoses of this type kink, so don't expect it to automatically avoid kick. It takes some care on your part to minimize it.

It's works great have not had any problems with the hose .no leakage, it's super easy to use . Anyone can use it it's so light

I was very impressed with this product. In addition a lot of extra fittings it seemed to be good quality. I immediately put it to use. It worked perfectly for about an hour, and then the hose accidentally touched the exhaust on the gasoline engine and burnt through very quickly and water was shooting everywhere. Upon inspection, it became obvious that the outer coating of this hose is not tolerant of heat at all works great, but if it touches anything hot, I think it’s the end of it’s usefulness.

After burning through multiple cheap pressure washer hoses, I decided to try the PWACCS 50-foot hose—and it’s been a game-changer. Here’s my honest take after months of use: **PROS:** ✔ **Kink-Resistant Design** – Unlike my old hose, this one doesn’t twist or collapse under pressure, even when dragging it around corners. ✔ **Handles 3600 PSI Like a Champ** – Works flawlessly with my 3000 PSI washer, showing no signs of bulging or leaks. ✔ **Durable Construction** – The reinforced rubber and braiding resist abrasion from concrete and gravel. ✔ **True Universal Fit** – M22 fittings connected perfectly to my Greenworks and DeWalt washers without adapters. ✔ **Flexible Yet Sturdy** – Easy to maneuver but doesn’t coil excessively when stored. **CONS:** ❌ **Heavier Than Standard Hoses** – The durability adds weight, so it’s slightly harder to lug around. ❌ **Stiff When Cold** – Takes a minute to loosen up in winter (but no cracking). **Final Verdict:** If you’re tired of replacing flimsy hoses every season, this one’s worth the investment. Zero regrets—just powerful, uninterrupted cleaning.

Good

Elle a percer pendant l’utilisation . Lavage de maison

Out of the box with 2 kinks already.

Great Product, Great price. Very impressed with this hose, fitttings are top notch. The price was fantastic.