Third Brake Light for Silverado/Sierra 1500 2500HD 3500HD (2007-2013)

Great fit and looks great

The media could not be loaded. I’m super happy with the finished product.WAY brighter than stock, the LED pattern looks bada**, and the strobe mod is going to enhance safety on the road. The smoked look is always more visually appealing than the clear IMO.All that being said, couple things to note.1: TEST BEFORE YOU COMPLETE INSTALLATIONOnce you peel that sticky and place it, and go through the struggles of getting the bolts secured, you’re gonna be sad if, one, it doesn’t work at all, or two, you have my problem… the on/off switch for the strobe option is REVERSED!According to instructions (& common sense), the on position should switch the brake triggered strobe ON, and vice versa. However, with mine, it was opposite.Secondly… if your truck is older like mine (2015), removing the old light will be quite tedious as the glue is hardened into the most tenacious black goop… it took me 30mins to extract the old light without just ripping it apart in frustration… and another hour of elbow grease and Goo-Gone trying to remove all the remaining goop still stuck.Watch a YouTube for tips on how to make getting the headliner loose and getting the nuts off without dropping them into the abyss.I was fortunate enough that I had an endoscope with a magnet 🧲 but y’all might not be so prepared.It’s VERY easy to drop the little buggers.Might be more tedious of a job than it sounds like, it certainly was for me.But now that it’s finished, I feel a deep sense of satisfaction looking at such a pretty little upgrade to my truck.10/10 would recommend!

As others have said, leaves a bit of a gap around it. The gap at the bottom makes sense, but the sides not so much. I just used some black silicone to fill the gap. No leaks…. Yet.

If you want the strobe function; make sure the switch is set to (O). I did not use the gasket that came with it. I removed it and used the OEM gasket for the OEM 3rd brake light. Nice fit and finish. Looks and functions better than stock.

This light looks awesome and the strobe on first press of the brake pedal is what I was looking for. This looks way cleaner than the factory one, no chrome showing. Only downside is this project is the biggest pain in the butt. This is the 2nd time I have done this and will pay someone to do in the future, I did all my lighting on my truck, bumpers, skid plates winch and this was the hardest. Just keep that in mind. I would buy again and pay to have it installed. Great product, great seller!

I have a 2007 Tundra and bought the light that if for 07-21 (not sure all those years are the same but w/e) and there is a big gap at the top. Wind is going to catch and force water in which is the opposite of what I wanted. This was supposed to solve my water issue. Garbage!

Great upgrade. Significantly brighter than the stock brake light. The strobe feature is why I purchased. It demands attention once you hit the brakes as it flashes for a second before turning solid red. The dark color of the lens matches my blacked out Tundra perfectly.Easier to install than most videos suggest. Use tape to hold the nuts more securely on your socket while reinstalling. Access is limited however easy to get to once you drop the rear window all the way down and simply use a panel removal tool to pop down 4 pin clips the hold the headliner in place. No need to remove anything to drop the headliner down a little.2/5 for install difficulty, 5/5 for product quality.

Based on mounting on a 2011 Silverado crew cab.While it is a nice looking light. And the flash option is nice.There are multiple downsides.1)The switch to change modes is pretty much a one and done sort of deal. Unless you drill a hole in your interior roof to mount it.2)Poor fit. Is far from even weather resistant, it is not. A bead of sealant is needed or your headliner will get soaked.3)As stated in an earlier review. It is all but impossible to aim this so the bed lights actually light up the bed.After a couple years of having it on the truck, I am returning to the original light, updated with LEDs.